[PATCH 5.10 15/70] net: stmmac: disable Split Header (SPH) for Intel platforms

[Greg Kroah-Hartman]

From: Tan Tee Min <tee.min.tan@xxxxxxxxxxxxxxx>

commit 47f753c1108e287edb3e27fad8a7511a9d55578e upstream.

Based on DesignWare Ethernet QoS datasheet, we are seeing the limitation
of Split Header (SPH) feature is not supported for Ipv4 fragmented packet.
This SPH limitation will cause ping failure when the packets size exceed
the MTU size. For example, the issue happens once the basic ping packet
size is larger than the configured MTU size and the data is lost inside
the fragmented packet, replaced by zeros/corrupted values, and leads to
ping fail.

So, disable the Split Header for Intel platforms.

v2: Add fixes tag in commit message.

Fixes: 67afd6d1cfdf("net: stmmac: Add Split Header support and enable it in XGMAC cores")
Cc: <stable@xxxxxxxxxxxxxxx> # 5.10.x
Suggested-by: Ong, Boon Leong <boon.leong.ong@xxxxxxxxx>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@xxxxxxxxx>
Signed-off-by: Wong Vee Khee <vee.khee.wong@xxxxxxxxxxxxxxx>
Signed-off-by: Tan Tee Min <tee.min.tan@xxxxxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c |    1 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |    2 +-
 include/linux/stmmac.h                            |    1 +
 3 files changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -243,6 +243,7 @@ static int intel_mgbe_common_data(struct
 	plat->has_gmac4 = 1;
 	plat->force_sf_dma_mode = 0;
 	plat->tso_en = 1;
+	plat->sph_disable = 1;
 
 	plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
 
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -5046,7 +5046,7 @@ int stmmac_dvr_probe(struct device *devi
 		dev_info(priv->device, "TSO feature enabled\n");
 	}
 
-	if (priv->dma_cap.sphen) {
+	if (priv->dma_cap.sphen && !priv->plat->sph_disable) {
 		ndev->hw_features |= NETIF_F_GRO;
 		priv->sph = true;
 		dev_info(priv->device, "SPH feature enabled\n");
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -203,5 +203,6 @@ struct plat_stmmacenet_data {
 	bool vlan_fail_q_en;
 	u8 vlan_fail_q;
 	unsigned int eee_usecs_rate;
+	bool sph_disable;
 };
 #endif