[PATCH] pinctrl: renesas: pinctrl-rzg2l: Return -EINVAL for pins which have input disabled

[Lad Prabhakar]

Pin status reported by pinconf-pins file always reported pin status as
"input enabled" even for pins which had input disabled. Fix this by
returning -EINVAL for the pins which have input disabled.

Fixes: c4c4637eb57f2 ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Reported-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index af2c739cdbaa..a63535ea47f5 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -527,6 +527,8 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
 		if (!(cfg & PIN_CFG_IEN))
 			return -EINVAL;
 		arg = rzg2l_read_pin_config(pctrl, IEN(port_offset), bit, IEN_MASK);
+		if (!arg)
+			return -EINVAL;
 		break;
 
 	case PIN_CONFIG_POWER_SOURCE: {
-- 
2.25.1