Re: [PATCH 4/9] dt-bindings: remoteproc: qcom: wcnss: Convert to YAML

[Krzysztof Kozlowski]

On 11/05/2022 18:15, Sireesh Kodali wrote:
> Convert the dt-bindings from txt to YAML. This is in preparation for
> including the relevant bindings for the MSM8953 platform's wcnss pil.
> 
> Signed-off-by: Sireesh Kodali <sireeshkodali1@xxxxxxxxx>

Thank you for your patch. There is something to discuss/improve.

Please use existing bindings or example-schema as a starting point. Half
of my review could be skipped if you just followed what we already have
in the tree.

Some of these qcom specific properties already exist but you decided to
write them differently... please don't, rather reuse the code.

(...)

> +
> +maintainers:
> +  - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> +
> +description:
> +  This document defines the binding for a component that loads and boots
> +  firmware on the Qualcomm WCNSS core.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - qcom,pronto-v2-pil
> +          - enum:
> +              - qcom,pronto

This does not look correct. The fallback compatible should not change.
What is more, it was not documented in original binding, so this should
be done in separate patch.

> +      - items:

No need for items, it's just one item.

> +          - enum:
> +              - qcom,riva-pil
> +              - qcom,pronto-v1-pil
> +              - qcom,pronto-v2-pil
> +
> +  reg:
> +    description: must specify the base address and size of the CCU, DXE and PMU
> +      register blocks

New line after "decription:", drop "must specify" and start with capital
letter.

You need maxItems: 3


> +
> +  reg-names:
> +    items:
> +      - const: ccu
> +      - const: dxe
> +      - const: pmu
> +
> +  interrupts-extended:
> +    description:
> +      Interrupt lines

Skip description, it's obvious.

It should be only "interrupts", not extended.

> +    minItems: 2
> +    maxItems: 5
> +
> +  interrupt-names:
> +    minItems: 2
> +    maxItems: 5

Names should be clearly defined. They were BTW defined in original
bindings, so you should not remove them. This makes me wonder what else
did you remove from original bindings...

Please document all deviations from pure conversion in the commit msg.
It's a second "hidden" difference.

> +
> +  firmware-name:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description: Relative firmware image path for the WCNSS core. Defaults to
> +      "wcnss.mdt".


Blank line after "description:". This applies to other places as well.

Remove "Defailts to ..." and just add "default" schema.

> +
> +  vddpx-supply:
> +    description: Reference to the PX regulator to be held on behalf of the
> +      booting of the WCNSS core
> +
> +  vddmx-supply:
> +    description: Reference to the MX regulator to be held on behalf of the
> +      booting of the WCNSS core.
> +
> +  vddcx-supply:
> +    description: Reference to the CX regulator to be held on behalf of the
> +      booting of the WCNSS core.

s/Reference to the//

> +
> +  power-domains:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: References to the power domains that need to be held on
> +      behalf of the booting WCNSS core

1. Ditto.
2. No need for ref
3. maxItems

> +
> +  power-domain-names:
> +    $ref: /schemas/types.yaml#/definitions/string-array

No need for ref, skip description.

> +    description: Names of the power domains
> +    items:
> +      - const: cx
> +      - const: mx
> +
> +  qcom,smem-states:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: States used by the AP to signal the WCNSS core that it should
> +      shutdown
> +    items:
> +      - description: Stop the modem
> +
> +  qcom,smem-state-names:
> +    $ref: /schemas/types.yaml#/definitions/string-array

No need for ref. Really, it does not appear in any of existing bindings
for smem-state-names, so how did you get it?

> +    description: The names of the state bits used for SMP2P output
> +    items:
> +      - const: stop
> +
> +  memory-region:
> +    maxItems: 1
> +    description: Reference to the reserved-memory for the WCNSS core
> +
> +  smd-edge:
> +    type: object
> +    description:
> +      Qualcomm Shared Memory subnode which represents communication edge,
> +      channels and devices related to the ADSP.

You should reference /schemas/soc/qcom/qcom,smd.yaml

> +
> +  iris:

Generic node name... what is "iris"?

> +    type: object
> +    description:
> +      The iris subnode of the WCNSS PIL is used to describe the attached rf module

s/rf/RF/

> +      and its resource dependencies.
> +
> +    properties:
> +      compatible:
> +        enum:
> +          - qcom,wcn3620
> +          - qcom,wcn3660
> +          - qcom,wcn3660b
> +          - qcom,wcn3680
> +
> +      clocks:
> +        description: XO clock
> +
> +      clock-names:
> +        items:
> +          - const: xo
> +
> +    required:
> +      - compatible

clocks and clock-names were required.
Missing supplies, which were btw as well required.

> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - interrupts-extended
> +  - interrupt-names
> +  - vddpx-supply
> +  - memory-region
> +  - smd-edge
> +  - iris
> +
> +additionalProperties: false
> +
> +if:

Within allOf, please.



Best regards,
Krzysztof