Re: [PATCH v5] drm/msm/dp: Always clear mask bits to disable interrupts at dp_ctrl_reset_irq_ctrl()

From: Dmitry Baryshkov
Date: Wed May 11 2022 - 20:42:01 EST


On 12/05/2022 03:02, Kuogee Hsieh wrote:
dp_catalog_ctrl_reset() will software reset DP controller. But it will
not reset programmable registers to default value. DP driver still have
to clear mask bits to interrupt status registers to disable interrupts
after software reset of controller.

At current implementation, dp_ctrl_reset_irq_ctrl() will software reset dp
controller but did not call dp_catalog_ctrl_enable_irq(false) to clear hpd
related interrupt mask bits to disable hpd related interrupts due to it
mistakenly think hpd related interrupt mask bits will be cleared by software
reset of dp controller automatically. This mistake may cause system to crash
during suspending procedure due to unexpected irq fired and trigger event
thread to access dp controller registers with controller clocks are disabled.

This patch fixes system crash during suspending problem by removing "enable"
flag condition checking at dp_ctrl_reset_irq_ctrl() so that hpd related
interrupt mask bits are cleared to prevent unexpected from happening.

ok. This is the main part of the description.

In addition, this patch also add suspended flag to prevent new events be
added into event Q to wake up event thread after system suspended.

And this describes the major part of the patch. First, it should go to a separate patch. Second, can you please describe, how can this happen once you disable the HPD interrupt?


Changes in v2:
-- add more details commit text

Changes in v3:
-- add synchrons_irq()
-- add atomic_t suspended

Changes in v4:
-- correct Fixes's commit ID
-- remove synchrons_irq()

Changes in v5:
-- revise commit text

Fixes: 989ebe7bc446 ("drm/msm/dp: do not initialize phy until plugin interrupt received")
Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
---
drivers/gpu/drm/msm/dp/dp_ctrl.c | 9 +++++++--
drivers/gpu/drm/msm/dp/dp_display.c | 11 +++++++++++
2 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index af7a80c..f3e333e 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1389,8 +1389,13 @@ void dp_ctrl_reset_irq_ctrl(struct dp_ctrl *dp_ctrl, bool enable)
dp_catalog_ctrl_reset(ctrl->catalog);
- if (enable)
- dp_catalog_ctrl_enable_irq(ctrl->catalog, enable);
+ /*
+ * all dp controller programmable registers will not
+ * be reset to default value after DP_SW_RESET
+ * therefore interrupt mask bits have to be updated
+ * to enable/disable interrupts
+ */
+ dp_catalog_ctrl_enable_irq(ctrl->catalog, enable);
}
void dp_ctrl_phy_init(struct dp_ctrl *dp_ctrl)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index c388323..79439b8 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -98,6 +98,8 @@ struct dp_display_private {
struct dp_ctrl *ctrl;
struct dp_debug *debug;
+ atomic_t suspended;

I think it'd be better to protect it with event_lock rather than using atomics.

+
struct dp_usbpd_cb usbpd_cb;
struct dp_display_mode dp_mode;
struct msm_dp dp_display;
@@ -187,6 +189,11 @@ static int dp_add_event(struct dp_display_private *dp_priv, u32 event,
int pndx;
spin_lock_irqsave(&dp_priv->event_lock, flag);
+ if (atomic_read(&dp_priv->suspended)) {
+ spin_unlock_irqrestore(&dp_priv->event_lock, flag);
+ return -EPERM;
+ }
+
pndx = dp_priv->event_pndx + 1;
pndx %= DP_EVENT_Q_MAX;
if (pndx == dp_priv->event_gndx) {
@@ -1362,6 +1369,8 @@ static int dp_pm_resume(struct device *dev)
dp->dp_display.connector_type, dp->core_initialized,
dp->phy_initialized, dp_display->power_on);
+ atomic_set(&dp->suspended, 0);
+
/* start from disconnected state */
dp->hpd_state = ST_DISCONNECTED;
@@ -1431,6 +1440,8 @@ static int dp_pm_suspend(struct device *dev)
dp->dp_display.connector_type, dp->core_initialized,
dp->phy_initialized, dp_display->power_on);
+ atomic_inc(&dp->suspended);
+
/* mainlink enabled */
if (dp_power_clk_status(dp->power, DP_CTRL_PM))
dp_ctrl_off_link_stream(dp->ctrl);


--
With best wishes
Dmitry