Re: hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device

From: srinivas pandruvada
Date: Thu May 12 2022 - 19:07:33 EST


Hi Paul,

On Thu, 2022-05-12 at 17:01 +0200, Paul Menzel wrote:
> Dear Linux folks,
>
>
> On the Dell XPS 13 9310, firmware 2.2.0 04/06/2021, with Debian
> sid/unstable, Linux 5.17.3 logs a lot of the messages below:
>
>      timeout waiting for response from ISHTP device
>
> Please find the output of `dmesg` attached.
>
It seems that sensor FW is not responding after resume.


What is
# cat /sys/power/mem_sleep


Thanks,
Srinivas

>
> Kind regards,
>
> Paul
>
>
> PS: Output of `lsusb` and `lspci -nn`:
>
> ```
> $ lsusb
> Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 003 Device 003: ID 0bda:5517 Realtek Semiconductor Corp.
> Integrated_Webcam_HD
> Bus 003 Device 017: ID 413c:301a Dell Computer Corp. Dell MS116
> Optical
> Mouse
> Bus 003 Device 016: ID 06c4:c412 Bizlink International Corp. DELL
> DA300
> Bus 003 Device 015: ID 2109:2820 VIA Labs, Inc. VL820 Hub
> Bus 003 Device 002: ID 27c6:533c Shenzhen Goodix Technology Co.,Ltd.
> FingerPrint
> Bus 003 Device 004: ID 8087:0026 Intel Corp. AX201 Bluetooth
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 012: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153
> Gigabit Ethernet Adapter
> Bus 002 Device 011: ID 2109:0820 VIA Labs, Inc. VL820 Hub
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> $ lspci -nn
> 00:00.0 Host bridge [0600]: Intel Corporation 11th Gen Core Processor
> Host Bridge/DRAM Registers [8086:9a14] (rev 01)
> 00:02.0 VGA compatible controller [0300]: Intel Corporation
> TigerLake-LP
> GT2 [Iris Xe Graphics] [8086:9a49] (rev 01)
> 00:04.0 Signal processing controller [1180]: Intel Corporation
> TigerLake-LP Dynamic Tuning Processor Participant [8086:9a03] (rev
> 01)
> 00:06.0 PCI bridge [0604]: Intel Corporation 11th Gen Core Processor
> PCIe Controller [8086:9a09] (rev 01)
> 00:07.0 PCI bridge [0604]: Intel Corporation Tiger Lake-LP
> Thunderbolt 4
> PCI Express Root Port #0 [8086:9a23] (rev 01)
> 00:07.2 PCI bridge [0604]: Intel Corporation Tiger Lake-LP
> Thunderbolt 4
> PCI Express Root Port #2 [8086:9a27] (rev 01)
> 00:0a.0 Signal processing controller [1180]: Intel Corporation
> Tigerlake
> Telemetry Aggregator Driver [8086:9a0d] (rev 01)
> 00:0d.0 USB controller [0c03]: Intel Corporation Tiger Lake-LP
> Thunderbolt 4 USB Controller [8086:9a13] (rev 01)
> 00:0d.2 USB controller [0c03]: Intel Corporation Tiger Lake-LP
> Thunderbolt 4 NHI #0 [8086:9a1b] (rev 01)
> 00:0d.3 USB controller [0c03]: Intel Corporation Tiger Lake-LP
> Thunderbolt 4 NHI #1 [8086:9a1d] (rev 01)
> 00:12.0 Serial controller [0700]: Intel Corporation Tiger Lake-LP
> Integrated Sensor Hub [8086:a0fc] (rev 20)
> 00:14.0 USB controller [0c03]: Intel Corporation Tiger Lake-LP USB
> 3.2
> Gen 2x1 xHCI Host Controller [8086:a0ed] (rev 20)
> 00:14.2 RAM memory [0500]: Intel Corporation Tiger Lake-LP Shared
> SRAM
> [8086:a0ef] (rev 20)
> 00:14.3 Network controller [0280]: Intel Corporation Wi-Fi 6 AX201
> [8086:a0f0] (rev 20)
> 00:15.0 Serial bus controller [0c80]: Intel Corporation Tiger Lake-LP
> Serial IO I2C Controller #0 [8086:a0e8] (rev 20)
> 00:15.1 Serial bus controller [0c80]: Intel Corporation Tiger Lake-LP
> Serial IO I2C Controller #1 [8086:a0e9] (rev 20)
> 00:16.0 Communication controller [0780]: Intel Corporation Tiger
> Lake-LP
> Management Engine Interface [8086:a0e0] (rev 20)
> 00:19.0 Serial bus controller [0c80]: Intel Corporation Tiger Lake-LP
> Serial IO I2C Controller #4 [8086:a0c5] (rev 20)
> 00:19.1 Serial bus controller [0c80]: Intel Corporation Tiger Lake-LP
> Serial IO I2C Controller #5 [8086:a0c6] (rev 20)
> 00:1d.0 PCI bridge [0604]: Intel Corporation Device [8086:a0b3] (rev
> 20)
> 00:1f.0 ISA bridge [0601]: Intel Corporation Tiger Lake-LP LPC
> Controller [8086:a082] (rev 20)
> 00:1f.3 Multimedia audio controller [0401]: Intel Corporation Tiger
> Lake-LP Smart Sound Technology Audio Controller [8086:a0c8] (rev 20)
> 00:1f.4 SMBus [0c05]: Intel Corporation Tiger Lake-LP SMBus
> Controller
> [8086:a0a3] (rev 20)
> 00:1f.5 Serial bus controller [0c80]: Intel Corporation Tiger Lake-LP
> SPI Controller [8086:a0a4] (rev 20)
> 01:00.0 Non-Volatile memory controller [0108]: Sandisk Corp WD Black
> SN750 / PC SN730 NVMe SSD [15b7:5006]
> 72:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd.
> RTS5260
> PCI Express Card Reader [10ec:5260] (rev 01)
> ```

[ 0.000000] microcode: microcode updated early to revision 0x9a, date = 2021-08-06
[ 0.000000] Linux version 5.17.0-1-amd64 (debian-kernel@xxxxxxxxxxxxxxxx) (gcc-11 (Debian 11.2.0-20) 11.2.0, GNU ld (GNU Binutils for Debian) 2.38) #1 SMP PREEMPT Debian 5.17.3-1 (2022-04-18)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.17.0-1-amd64 root=UUID=5785450f-16cb-4e58-bb67-4086555b07f0 ro quiet log_buf_len=4M
[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64
[ 0.000000] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512
[ 0.000000] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[ 0.000000] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8
[ 0.000000] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.
[ 0.000000] signal: max sigframe size: 3632
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005e72afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005e72b000-0x000000005e84dfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000005e84e000-0x0000000062510fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000062511000-0x0000000062d71fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000062d72000-0x0000000062ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000062fff000-0x0000000062ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000063000000-0x0000000066ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000067600000-0x00000000677fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000068000000-0x00000000707fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000048f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.70 by Dell
[ 0.000000] efi: ACPI=0x62ffe000 ACPI 2.0=0x62ffe014 SMBIOS=0x5edd7000 TPMFinalLog=0x62cd8000 ESRT=0x5ecc9a18 MEMATTR=0x59e7b018
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] SMBIOS 3.2 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9310/0GG9PT, BIOS 2.2.0 04/06/2021
[ 0.000000] tsc: Detected 2800.000 MHz processor
[ 0.000000] tsc: Detected 2803.200 MHz TSC
[ 0.000005] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000007] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000010] last_pfn = 0x48f800 max_arch_pfn = 0x400000000
[ 0.000119] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000922] last_pfn = 0x63000 max_arch_pfn = 0x400000000
[ 0.007359] esrt: Reserving ESRT space from 0x000000005ecc9a18 to 0x000000005ecc9aa0.
[ 0.007369] Using GB pages for direct mapping
[ 0.009001] printk: log_buf_len: 4194304 bytes
[ 0.009003] printk: early log buf free: 127584(97%)
[ 0.009003] RAMDISK: [mem 0x36d97000-0x376c2fff]
[ 0.009007] ACPI: Early table checksum verification disabled
[ 0.009010] ACPI: RSDP 0x0000000062FFE014 000024 (v02 DELL )
[ 0.009013] ACPI: XSDT 0x0000000062F78188 0000FC (v01 DELL Dell Inc 00000002 01000013)
[ 0.009025] ACPI: FACP 0x0000000062FF5000 000114 (v06 DELL Dell Inc 00000002 01000013)
[ 0.009028] ACPI: DSDT 0x0000000062F97000 05A2BC (v02 DELL Dell Inc 00000002 01000013)
[ 0.009030] ACPI: FACS 0x0000000062D1B000 000040
[ 0.009032] ACPI: SSDT 0x0000000062FFA000 0024D0 (v02 CpuRef CpuSsdt 00003000 INTL 20191018)
[ 0.009034] ACPI: SSDT 0x0000000062FF6000 0038FA (v02 DptfTb DptfTabl 00001000 INTL 20191018)
[ 0.009035] ACPI: HPET 0x0000000062FF4000 000038 (v01 DELL Dell Inc 00000002 01000013)
[ 0.009037] ACPI: APIC 0x0000000062FF3000 00012C (v04 DELL Dell Inc 00000002 01000013)
[ 0.009039] ACPI: MCFG 0x0000000062FF2000 00003C (v01 DELL Dell Inc 00000002 01000013)
[ 0.009041] ACPI: SSDT 0x0000000062F96000 000D01 (v02 DELL DellRtd3 00001000 INTL 20191018)
[ 0.009043] ACPI: NHLT 0x0000000062F94000 001B54 (v00 DELL Dell Inc 00000002 01000013)
[ 0.009044] ACPI: SSDT 0x0000000062F91000 002CCD (v02 SaSsdt SaSsdt 00003000 INTL 20191018)
[ 0.009046] ACPI: SSDT 0x0000000062F8F000 0012AA (v02 INTEL IgfxSsdt 00003000 INTL 20191018)
[ 0.009048] ACPI: SSDT 0x0000000062F83000 00B192 (v02 INTEL TcssSsdt 00001000 INTL 20191018)
[ 0.009050] ACPI: SSDT 0x0000000062F82000 000CD2 (v02 DELL UsbCTabl 00001000 INTL 20191018)
[ 0.009051] ACPI: LPIT 0x0000000062F81000 0000CC (v01 DELL Dell Inc 00000002 01000013)
[ 0.009053] ACPI: SSDT 0x0000000062F80000 000B75 (v02 DELL PtidDevc 00001000 INTL 20191018)
[ 0.009055] ACPI: SSDT 0x0000000062F7F000 00012A (v02 DELL TbtTypeC 00000000 INTL 20191018)
[ 0.009057] ACPI: DBGP 0x0000000062F7E000 000034 (v01 DELL Dell Inc 00000002 01000013)
[ 0.009058] ACPI: DBG2 0x0000000062F7D000 000054 (v00 DELL Dell Inc 00000002 01000013)
[ 0.009060] ACPI: SLIC 0x0000000062F7C000 000176 (v03 DELL CBX3 06222004 MSFT 00010013)
[ 0.009062] ACPI: BOOT 0x0000000062F7B000 000028 (v01 DELL CBX3 00000002 01000013)
[ 0.009064] ACPI: SSDT 0x0000000062F7A000 00060E (v02 DELL Tpm2Tabl 00001000 INTL 20191018)
[ 0.009065] ACPI: TPM2 0x0000000062F79000 00004C (v04 DELL Dell Inc 00000002 01000013)
[ 0.009067] ACPI: DMAR 0x0000000062FFD000 0000B8 (v02 INTEL Dell Inc 00000002 01000013)
[ 0.009069] ACPI: SSDT 0x0000000062F77000 000841 (v02 DELL xh_Dell_ 00000000 INTL 20191018)
[ 0.009070] ACPI: SSDT 0x0000000062F76000 000144 (v02 Intel ADebTabl 00001000 INTL 20191018)
[ 0.009072] ACPI: PTDT 0x0000000062F75000 000D44 (v00 DELL Dell Inc 00000005 MSFT 0100000D)
[ 0.009074] ACPI: BGRT 0x0000000062F74000 000038 (v01 DELL Dell Inc 00000002 01000013)
[ 0.009076] ACPI: FPDT 0x0000000062F73000 000034 (v01 DELL Dell Inc 00000002 01000013)
[ 0.009077] ACPI: Reserving FACP table memory at [mem 0x62ff5000-0x62ff5113]
[ 0.009078] ACPI: Reserving DSDT table memory at [mem 0x62f97000-0x62ff12bb]
[ 0.009078] ACPI: Reserving FACS table memory at [mem 0x62d1b000-0x62d1b03f]
[ 0.009079] ACPI: Reserving SSDT table memory at [mem 0x62ffa000-0x62ffc4cf]
[ 0.009080] ACPI: Reserving SSDT table memory at [mem 0x62ff6000-0x62ff98f9]
[ 0.009080] ACPI: Reserving HPET table memory at [mem 0x62ff4000-0x62ff4037]
[ 0.009081] ACPI: Reserving APIC table memory at [mem 0x62ff3000-0x62ff312b]
[ 0.009081] ACPI: Reserving MCFG table memory at [mem 0x62ff2000-0x62ff203b]
[ 0.009081] ACPI: Reserving SSDT table memory at [mem 0x62f96000-0x62f96d00]
[ 0.009082] ACPI: Reserving NHLT table memory at [mem 0x62f94000-0x62f95b53]
[ 0.009082] ACPI: Reserving SSDT table memory at [mem 0x62f91000-0x62f93ccc]
[ 0.009083] ACPI: Reserving SSDT table memory at [mem 0x62f8f000-0x62f902a9]
[ 0.009083] ACPI: Reserving SSDT table memory at [mem 0x62f83000-0x62f8e191]
[ 0.009084] ACPI: Reserving SSDT table memory at [mem 0x62f82000-0x62f82cd1]
[ 0.009084] ACPI: Reserving LPIT table memory at [mem 0x62f81000-0x62f810cb]
[ 0.009085] ACPI: Reserving SSDT table memory at [mem 0x62f80000-0x62f80b74]
[ 0.009085] ACPI: Reserving SSDT table memory at [mem 0x62f7f000-0x62f7f129]
[ 0.009086] ACPI: Reserving DBGP table memory at [mem 0x62f7e000-0x62f7e033]
[ 0.009086] ACPI: Reserving DBG2 table memory at [mem 0x62f7d000-0x62f7d053]
[ 0.009087] ACPI: Reserving SLIC table memory at [mem 0x62f7c000-0x62f7c175]
[ 0.009087] ACPI: Reserving BOOT table memory at [mem 0x62f7b000-0x62f7b027]
[ 0.009088] ACPI: Reserving SSDT table memory at [mem 0x62f7a000-0x62f7a60d]
[ 0.009088] ACPI: Reserving TPM2 table memory at [mem 0x62f79000-0x62f7904b]
[ 0.009089] ACPI: Reserving DMAR table memory at [mem 0x62ffd000-0x62ffd0b7]
[ 0.009090] ACPI: Reserving SSDT table memory at [mem 0x62f77000-0x62f77840]
[ 0.009090] ACPI: Reserving SSDT table memory at [mem 0x62f76000-0x62f76143]
[ 0.009091] ACPI: Reserving PTDT table memory at [mem 0x62f75000-0x62f75d43]
[ 0.009091] ACPI: Reserving BGRT table memory at [mem 0x62f74000-0x62f74037]
[ 0.009092] ACPI: Reserving FPDT table memory at [mem 0x62f73000-0x62f73033]
[ 0.009332] No NUMA configuration found
[ 0.009332] Faking a node at [mem 0x0000000000000000-0x000000048f7fffff]
[ 0.009338] NODE_DATA(0) allocated [mem 0x48e5d5000-0x48e5fffff]
[ 0.009475] Zone ranges:
[ 0.009475] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.009476] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.009477] Normal [mem 0x0000000100000000-0x000000048f7fffff]
[ 0.009478] Device empty
[ 0.009479] Movable zone start for each node
[ 0.009480] Early memory node ranges
[ 0.009480] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.009481] node 0: [mem 0x0000000000100000-0x000000005e72afff]
[ 0.009482] node 0: [mem 0x0000000062fff000-0x0000000062ffffff]
[ 0.009482] node 0: [mem 0x0000000100000000-0x000000048f7fffff]
[ 0.009484] Initmem setup node 0 [mem 0x0000000000001000-0x000000048f7fffff]
[ 0.009487] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.009512] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.011783] On node 0, zone DMA32: 18644 pages in unavailable ranges
[ 0.012106] On node 0, zone Normal: 20480 pages in unavailable ranges
[ 0.012119] On node 0, zone Normal: 2048 pages in unavailable ranges
[ 0.012139] Reserving Intel graphics memory at [mem 0x6c800000-0x707fffff]
[ 0.012552] ACPI: PM-Timer IO Port: 0x1808
[ 0.012556] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.012557] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.012558] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.012558] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.012558] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.012559] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.012559] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.012559] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.012560] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.012560] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.012561] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.012561] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.012561] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ 0.012562] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ 0.012562] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ 0.012562] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[ 0.012598] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.012600] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.012601] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.012603] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.012604] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.012610] e820: update [mem 0x59cd7000-0x59cf4fff] usable ==> reserved
[ 0.012615] TSC deadline timer available
[ 0.012615] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.012626] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.012627] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.012628] PM: hibernation: Registered nosave memory: [mem 0x59cd7000-0x59cf4fff]
[ 0.012629] PM: hibernation: Registered nosave memory: [mem 0x5e72b000-0x5e84dfff]
[ 0.012630] PM: hibernation: Registered nosave memory: [mem 0x5e84e000-0x62510fff]
[ 0.012630] PM: hibernation: Registered nosave memory: [mem 0x62511000-0x62d71fff]
[ 0.012630] PM: hibernation: Registered nosave memory: [mem 0x62d72000-0x62ffefff]
[ 0.012631] PM: hibernation: Registered nosave memory: [mem 0x63000000-0x66ffffff]
[ 0.012632] PM: hibernation: Registered nosave memory: [mem 0x67000000-0x675fffff]
[ 0.012632] PM: hibernation: Registered nosave memory: [mem 0x67600000-0x677fffff]
[ 0.012633] PM: hibernation: Registered nosave memory: [mem 0x67800000-0x67ffffff]
[ 0.012633] PM: hibernation: Registered nosave memory: [mem 0x68000000-0x707fffff]
[ 0.012633] PM: hibernation: Registered nosave memory: [mem 0x70800000-0xbfffffff]
[ 0.012634] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xcfffffff]
[ 0.012634] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfed1ffff]
[ 0.012634] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[ 0.012635] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfeffffff]
[ 0.012635] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.012636] [mem 0x70800000-0xbfffffff] available for PCI devices
[ 0.012637] Booting paravirtualized kernel on bare hardware
[ 0.012639] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.015560] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.015678] percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u262144
[ 0.015682] pcpu-alloc: s208896 r8192 d28672 u262144 alloc=1*2097152
[ 0.015684] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.015700] Fallback order for Node 0: 0
[ 0.015702] Built 1 zonelists, mobility grouping on. Total pages: 4055727
[ 0.015703] Policy zone: Normal
[ 0.015704] Kernel command line: BOOT_IMAGE=/vmlinuz-5.17.0-1-amd64 root=UUID=5785450f-16cb-4e58-bb67-4086555b07f0 ro quiet log_buf_len=4M
[ 0.015733] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-5.17.0-1-amd64", will be passed to user space.
[ 0.016150] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.016359] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.016414] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.028434] Memory: 1497800K/16481064K available (12294K kernel code, 2726K rwdata, 8472K rodata, 2496K init, 5224K bss, 525072K reserved, 0K cma-reserved)
[ 0.028438] random: get_random_u64 called from __kmem_cache_create+0x2a/0x530 with crng_init=0
[ 0.028536] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.028544] ftrace: allocating 38500 entries in 151 pages
[ 0.032883] ftrace: allocated 151 pages with 5 groups
[ 0.033351] Dynamic Preempt: voluntary
[ 0.033371] rcu: Preemptible hierarchical RCU implementation.
[ 0.033372] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.033372] Trampoline variant of Tasks RCU enabled.
[ 0.033373] Rude variant of Tasks RCU enabled.
[ 0.033373] Tracing variant of Tasks RCU enabled.
[ 0.033374] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.033374] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.035417] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[ 0.035856] random: crng init done (trusting CPU's manufacturer)
[ 0.035871] Console: colour dummy device 80x25
[ 0.035878] printk: console [tty0] enabled
[ 0.035888] ACPI: Core revision 20211217
[ 0.036085] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.036086] APIC: Switch to symmetric I/O mode setup
[ 0.036088] DMAR: Host address width 39
[ 0.036088] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.036091] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 69e2ff0505e
[ 0.036093] DMAR: DRHD base: 0x000000fed84000 flags: 0x0
[ 0.036096] DMAR: dmar1: reg_base_addr fed84000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.036098] DMAR: DRHD base: 0x000000fed86000 flags: 0x0
[ 0.036099] DMAR: dmar2: reg_base_addr fed86000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.036102] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.036103] DMAR: dmar3: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.036108] DMAR: RMRR base: 0x0000006c000000 end: 0x000000707fffff
[ 0.036110] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 3
[ 0.036111] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.036111] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.038104] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.038105] x2apic enabled
[ 0.038136] Switched APIC routing to cluster x2apic.
[ 0.042600] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x28680fa287f, max_idle_ns: 440795281151 ns
[ 0.042609] Calibrating delay loop (skipped), value calculated using timer frequency.. 5606.40 BogoMIPS (lpj=11212800)
[ 0.042611] pid_max: default: 32768 minimum: 301
[ 0.044908] LSM: Security Framework initializing
[ 0.044915] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.044932] AppArmor: AppArmor initialized
[ 0.044933] TOMOYO Linux initialized
[ 0.044993] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.045022] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.045214] CPU0: Thermal monitoring enabled (TM1)
[ 0.045216] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.045314] process: using mwait in idle threads
[ 0.045315] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.045316] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.045319] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.045321] Spectre V2 : Mitigation: Enhanced IBRS
[ 0.045322] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.045323] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.045324] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.046604] Freeing SMP alternatives memory: 32K
[ 0.046604] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1499
[ 0.046604] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz (family: 0x6, model: 0x8c, stepping: 0x1)
[ 0.046604] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.046604] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.046604] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.046604] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.046604] Performance Events: PEBS fmt4+-baseline, AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.046604] ... version: 5
[ 0.046604] ... bit width: 48
[ 0.046604] ... generic registers: 8
[ 0.046604] ... value mask: 0000ffffffffffff
[ 0.046604] ... max period: 00007fffffffffff
[ 0.046604] ... fixed-purpose events: 4
[ 0.046604] ... event mask: 0001000f000000ff
[ 0.046604] rcu: Hierarchical SRCU implementation.
[ 0.046604] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.046604] smp: Bringing up secondary CPUs ...
[ 0.046604] x86: Booting SMP configuration:
[ 0.046604] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.055197] smp: Brought up 1 node, 8 CPUs
[ 0.055197] smpboot: Max logical packages: 1
[ 0.055197] smpboot: Total of 8 processors activated (44851.20 BogoMIPS)
[ 0.074649] node 0 deferred pages initialised in 16ms
[ 0.075094] devtmpfs: initialized
[ 0.075094] x86/mm: Memory block size: 128MB
[ 0.075362] ACPI: PM: Registering ACPI NVS region [mem 0x62511000-0x62d71fff] (8785920 bytes)
[ 0.075362] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.075362] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.075362] pinctrl core: initialized pinctrl subsystem
[ 0.075362] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.075362] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.075362] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.075381] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.075389] audit: initializing netlink subsys (disabled)
[ 0.075397] audit: type=2000 audit(1651564592.032:1): state=initialized audit_enabled=0 res=1
[ 0.075397] thermal_sys: Registered thermal governor 'fair_share'
[ 0.075397] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.075397] thermal_sys: Registered thermal governor 'step_wise'
[ 0.075397] thermal_sys: Registered thermal governor 'user_space'
[ 0.075397] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.075397] cpuidle: using governor ladder
[ 0.075397] cpuidle: using governor menu
[ 0.075397] Simple Boot Flag at 0x47 set to 0x80
[ 0.075397] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.075397] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ 0.075397] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[ 0.075397] PCI: Using configuration type 1 for base access
[ 0.075397] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.078989] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.078995] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.078995] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.078995] ACPI: Added _OSI(Module Device)
[ 0.078995] ACPI: Added _OSI(Processor Device)
[ 0.078995] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.078995] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.078995] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.078995] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.078995] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.125677] ACPI: 13 ACPI AML tables successfully acquired and loaded
[ 0.136958] ACPI: Dynamic OEM Table Load:
[ 0.136966] ACPI: SSDT 0xFFFF88FC06D25600 0001CB (v02 PmRef Cpu0Psd 00003000 INTL 20191018)
[ 0.137632] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.138960] ACPI: Dynamic OEM Table Load:
[ 0.138965] ACPI: SSDT 0xFFFF88FB413C0800 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20191018)
[ 0.139715] ACPI: Dynamic OEM Table Load:
[ 0.139720] ACPI: SSDT 0xFFFF88FB413DF800 000647 (v02 PmRef Cpu0Ist 00003000 INTL 20191018)
[ 0.140451] ACPI: Dynamic OEM Table Load:
[ 0.140455] ACPI: SSDT 0xFFFF88FB413C5C00 000266 (v02 PmRef Cpu0Hwp 00003000 INTL 20191018)
[ 0.141203] ACPI: Dynamic OEM Table Load:
[ 0.141208] ACPI: SSDT 0xFFFF88FB40116000 0008E7 (v02 PmRef ApIst 00003000 INTL 20191018)
[ 0.141932] ACPI: Dynamic OEM Table Load:
[ 0.141936] ACPI: SSDT 0xFFFF88FB413DC000 00048A (v02 PmRef ApHwp 00003000 INTL 20191018)
[ 0.142629] ACPI: Dynamic OEM Table Load:
[ 0.142633] ACPI: SSDT 0xFFFF88FB413DC800 0004D4 (v02 PmRef ApPsd 00003000 INTL 20191018)
[ 0.143346] ACPI: Dynamic OEM Table Load:
[ 0.143351] ACPI: SSDT 0xFFFF88FB413D9000 00048A (v02 PmRef ApCst 00003000 INTL 20191018)
[ 0.146624] ACPI: EC: EC started
[ 0.146624] ACPI: EC: interrupt blocked
[ 0.148857] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.148859] ACPI: \_SB_.PC00.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.148860] ACPI: Interpreter enabled
[ 0.148911] ACPI: PM: (supports S0 S4 S5)
[ 0.148912] ACPI: Using IOAPIC for interrupt routing
[ 0.148954] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.150316] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.154076] ACPI: PM: Power Resource [BTPR]
[ 0.161421] ACPI: PM: Power Resource [V0PR]
[ 0.161515] ACPI: PM: Power Resource [V1PR]
[ 0.161600] ACPI: PM: Power Resource [V2PR]
[ 0.164563] ACPI: PM: Power Resource [WRST]
[ 0.166527] ACPI: PM: Power Resource [TBT0]
[ 0.166551] ACPI: PM: Power Resource [TBT1]
[ 0.166572] ACPI: PM: Power Resource [D3C]
[ 0.407884] ACPI: PM: Power Resource [PIN]
[ 0.408109] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
[ 0.408114] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.409603] acpi PNP0A08:00: _OSC: platform does not support [AER]
[ 0.412588] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR]
[ 0.415026] PCI host bridge to bus 0000:00
[ 0.415027] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.415029] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.415030] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.415034] pci_bus 0000:00: root bus resource [mem 0x70800000-0xbfffffff window]
[ 0.415035] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[ 0.415036] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.415147] pci 0000:00:00.0: [8086:9a14] type 00 class 0x060000
[ 0.415262] pci 0000:00:02.0: [8086:9a49] type 00 class 0x030000
[ 0.415271] pci 0000:00:02.0: reg 0x10: [mem 0x6052000000-0x6052ffffff 64bit]
[ 0.415277] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[ 0.415281] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.415295] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.415296] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[ 0.415299] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.415326] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit]
[ 0.415328] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs)
[ 0.415332] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref]
[ 0.415333] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs)
[ 0.415444] pci 0000:00:04.0: [8086:9a03] type 00 class 0x118000
[ 0.415460] pci 0000:00:04.0: reg 0x10: [mem 0x6053180000-0x605319ffff 64bit]
[ 0.415702] pci 0000:00:06.0: [8086:9a09] type 01 class 0x060400
[ 0.415781] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.415814] pci 0000:00:06.0: PTM enabled (root), 4ns granularity
[ 0.416129] pci 0000:00:07.0: [8086:9a23] type 01 class 0x060400
[ 0.416201] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.416224] pci 0000:00:07.0: DPC: RP PIO log size 0 is invalid
[ 0.416627] pci 0000:00:07.2: [8086:9a27] type 01 class 0x060400
[ 0.416700] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
[ 0.416722] pci 0000:00:07.2: DPC: RP PIO log size 0 is invalid
[ 0.417109] pci 0000:00:0a.0: [8086:9a0d] type 00 class 0x118000
[ 0.417116] pci 0000:00:0a.0: reg 0x10: [mem 0x60531d0000-0x60531d7fff 64bit]
[ 0.417136] pci 0000:00:0a.0: enabling Extended Tags
[ 0.417201] pci 0000:00:0d.0: [8086:9a13] type 00 class 0x0c0330
[ 0.417213] pci 0000:00:0d.0: reg 0x10: [mem 0x60531c0000-0x60531cffff 64bit]
[ 0.417265] pci 0000:00:0d.0: PME# supported from D3hot D3cold
[ 0.417443] pci 0000:00:0d.2: [8086:9a1b] type 00 class 0x0c0340
[ 0.417453] pci 0000:00:0d.2: reg 0x10: [mem 0x6053140000-0x605317ffff 64bit]
[ 0.417460] pci 0000:00:0d.2: reg 0x18: [mem 0x60531ec000-0x60531ecfff 64bit]
[ 0.417493] pci 0000:00:0d.2: supports D1 D2
[ 0.417494] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.417564] pci 0000:00:0d.3: [8086:9a1d] type 00 class 0x0c0340
[ 0.417574] pci 0000:00:0d.3: reg 0x10: [mem 0x6053100000-0x605313ffff 64bit]
[ 0.417581] pci 0000:00:0d.3: reg 0x18: [mem 0x60531eb000-0x60531ebfff 64bit]
[ 0.417614] pci 0000:00:0d.3: supports D1 D2
[ 0.417615] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.417718] pci 0000:00:12.0: [8086:a0fc] type 00 class 0x070000
[ 0.417740] pci 0000:00:12.0: reg 0x10: [mem 0x60531b0000-0x60531bffff 64bit]
[ 0.417807] pci 0000:00:12.0: PME# supported from D0 D3hot
[ 0.418070] pci 0000:00:14.0: [8086:a0ed] type 00 class 0x0c0330
[ 0.418091] pci 0000:00:14.0: reg 0x10: [mem 0x60531a0000-0x60531affff 64bit]
[ 0.418175] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.418362] pci 0000:00:14.2: [8086:a0ef] type 00 class 0x050000
[ 0.418382] pci 0000:00:14.2: reg 0x10: [mem 0x60531e0000-0x60531e3fff 64bit]
[ 0.418396] pci 0000:00:14.2: reg 0x18: [mem 0x60531ea000-0x60531eafff 64bit]
[ 0.418511] pci 0000:00:14.3: [8086:a0f0] type 00 class 0x028000
[ 0.418532] pci 0000:00:14.3: reg 0x10: [mem 0x60531dc000-0x60531dffff 64bit]
[ 0.418668] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[ 0.418828] pci 0000:00:15.0: [8086:a0e8] type 00 class 0x0c8000
[ 0.418855] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.419188] pci 0000:00:15.1: [8086:a0e9] type 00 class 0x0c8000
[ 0.419216] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.419546] pci 0000:00:16.0: [8086:a0e0] type 00 class 0x078000
[ 0.419568] pci 0000:00:16.0: reg 0x10: [mem 0x60531e7000-0x60531e7fff 64bit]
[ 0.419652] pci 0000:00:16.0: PME# supported from D3hot
[ 0.419987] pci 0000:00:19.0: [8086:a0c5] type 00 class 0x0c8000
[ 0.420015] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.420251] pci 0000:00:19.1: [8086:a0c6] type 00 class 0x0c8000
[ 0.420276] pci 0000:00:19.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.420627] pci 0000:00:1d.0: [8086:a0b3] type 01 class 0x060400
[ 0.420727] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.420762] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[ 0.421110] pci 0000:00:1f.0: [8086:a082] type 00 class 0x060100
[ 0.421364] pci 0000:00:1f.3: [8086:a0c8] type 00 class 0x040100
[ 0.421406] pci 0000:00:1f.3: reg 0x10: [mem 0x60531d8000-0x60531dbfff 64bit]
[ 0.421460] pci 0000:00:1f.3: reg 0x20: [mem 0x6053000000-0x60530fffff 64bit]
[ 0.421565] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.421828] pci 0000:00:1f.4: [8086:a0a3] type 00 class 0x0c0500
[ 0.421850] pci 0000:00:1f.4: reg 0x10: [mem 0x60531e4000-0x60531e40ff 64bit]
[ 0.421872] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.422023] pci 0000:00:1f.5: [8086:a0a4] type 00 class 0x0c8000
[ 0.422041] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.422200] pci 0000:01:00.0: [15b7:5006] type 00 class 0x010802
[ 0.422216] pci 0000:01:00.0: reg 0x10: [mem 0xa2500000-0xa2503fff 64bit]
[ 0.422238] pci 0000:01:00.0: reg 0x20: [mem 0xa2504000-0xa25040ff 64bit]
[ 0.422390] pci 0000:00:06.0: PCI bridge to [bus 01]
[ 0.422393] pci 0000:00:06.0: bridge window [mem 0xa2500000-0xa25fffff]
[ 0.422424] pci 0000:00:07.0: PCI bridge to [bus 02-39]
[ 0.422427] pci 0000:00:07.0: bridge window [mem 0x8c000000-0xa23fffff]
[ 0.422431] pci 0000:00:07.0: bridge window [mem 0x6000000000-0x6021ffffff 64bit pref]
[ 0.422459] pci 0000:00:07.2: PCI bridge to [bus 3a-71]
[ 0.422463] pci 0000:00:07.2: bridge window [mem 0x74000000-0x8a3fffff]
[ 0.422466] pci 0000:00:07.2: bridge window [mem 0x6030000000-0x6051ffffff 64bit pref]
[ 0.422522] pci 0000:72:00.0: [10ec:5260] type 00 class 0xff0000
[ 0.422539] pci 0000:72:00.0: reg 0x10: [mem 0xa2400000-0xa2400fff]
[ 0.422684] pci 0000:72:00.0: supports D1 D2
[ 0.422685] pci 0000:72:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.422825] pci 0000:00:1d.0: PCI bridge to [bus 72]
[ 0.422829] pci 0000:00:1d.0: bridge window [mem 0xa2400000-0xa24fffff]
[ 0.444666] ACPI: EC: interrupt unblocked
[ 0.444667] ACPI: EC: event unblocked
[ 0.444676] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.444677] ACPI: EC: GPE=0x6e
[ 0.444678] ACPI: \_SB_.PC00.LPCB.ECDV: Boot DSDT EC initialization complete
[ 0.444680] ACPI: \_SB_.PC00.LPCB.ECDV: EC: Used to handle transactions and events
[ 0.444762] iommu: Default domain type: Translated
[ 0.444762] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.444762] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.444762] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.444762] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.444762] vgaarb: loaded
[ 0.444762] EDAC MC: Ver: 3.0.0
[ 0.444762] Registered efivars operations
[ 0.444762] NetLabel: Initializing
[ 0.444762] NetLabel: domain hash size = 128
[ 0.444762] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.444762] NetLabel: unlabeled traffic allowed by default
[ 0.444762] PCI: Using ACPI for IRQ routing
[ 0.461065] PCI: pci_cache_line_size set to 64 bytes
[ 0.461232] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[ 0.461370] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.461371] e820: reserve RAM buffer [mem 0x59cd7000-0x5bffffff]
[ 0.461372] e820: reserve RAM buffer [mem 0x5e72b000-0x5fffffff]
[ 0.461373] e820: reserve RAM buffer [mem 0x63000000-0x63ffffff]
[ 0.461373] e820: reserve RAM buffer [mem 0x48f800000-0x48fffffff]
[ 0.461468] clocksource: Switched to clocksource tsc-early
[ 0.463210] VFS: Disk quotas dquot_6.6.0
[ 0.463218] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.463287] AppArmor: AppArmor Filesystem Enabled
[ 0.463294] pnp: PnP ACPI init
[ 0.463442] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.463444] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.463525] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.464279] pnp 00:05: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
[ 0.464301] system 00:05: [mem 0xfedc0000-0xfedc7fff] has been reserved
[ 0.464303] system 00:05: [mem 0xfeda0000-0xfeda0fff] has been reserved
[ 0.464304] system 00:05: [mem 0xfeda1000-0xfeda1fff] has been reserved
[ 0.464305] system 00:05: [mem 0xfed20000-0xfed7ffff] could not be reserved
[ 0.464307] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.464308] system 00:05: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.464309] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.465143] system 00:06: [io 0x1800-0x18fe] could not be reserved
[ 0.465145] system 00:06: [mem 0xfe000000-0xfe01ffff] has been reserved
[ 0.465146] system 00:06: [mem 0xfe04c000-0xfe04ffff] has been reserved
[ 0.465147] system 00:06: [mem 0xfe050000-0xfe0affff] has been reserved
[ 0.465148] system 00:06: [mem 0xfe0d0000-0xfe0fffff] has been reserved
[ 0.465149] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.465150] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.465152] system 00:06: [mem 0xfd000000-0xfd68ffff] has been reserved
[ 0.465153] system 00:06: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[ 0.465154] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.465404] system 00:07: [io 0x2000-0x20fe] has been reserved
[ 0.468375] pnp: PnP ACPI: found 9 devices
[ 0.473592] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.473624] NET: Registered PF_INET protocol family
[ 0.473787] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.474787] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.474876] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.475048] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.475089] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.475163] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.475225] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.475262] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.475306] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.475310] NET: Registered PF_XDP protocol family
[ 0.475313] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
[ 0.475323] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref]
[ 0.475326] pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit]
[ 0.475328] pci 0000:00:07.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.475330] pci 0000:00:07.2: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.475331] pci 0000:00:15.0: BAR 0: assigned [mem 0x4017000000-0x4017000fff 64bit]
[ 0.475388] pci 0000:00:15.1: BAR 0: assigned [mem 0x4017001000-0x4017001fff 64bit]
[ 0.475407] pci 0000:00:19.0: BAR 0: assigned [mem 0x4017002000-0x4017002fff 64bit]
[ 0.475426] pci 0000:00:19.1: BAR 0: assigned [mem 0x4017003000-0x4017003fff 64bit]
[ 0.475445] pci 0000:00:1f.5: BAR 0: assigned [mem 0x70800000-0x70800fff]
[ 0.475457] pci 0000:00:06.0: PCI bridge to [bus 01]
[ 0.475464] pci 0000:00:06.0: bridge window [mem 0xa2500000-0xa25fffff]
[ 0.475472] pci 0000:00:07.0: PCI bridge to [bus 02-39]
[ 0.475474] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
[ 0.475477] pci 0000:00:07.0: bridge window [mem 0x8c000000-0xa23fffff]
[ 0.475479] pci 0000:00:07.0: bridge window [mem 0x6000000000-0x6021ffffff 64bit pref]
[ 0.475494] pci 0000:00:07.2: PCI bridge to [bus 3a-71]
[ 0.475503] pci 0000:00:07.2: bridge window [io 0x5000-0x5fff]
[ 0.475516] pci 0000:00:07.2: bridge window [mem 0x74000000-0x8a3fffff]
[ 0.475527] pci 0000:00:07.2: bridge window [mem 0x6030000000-0x6051ffffff 64bit pref]
[ 0.475547] pci 0000:00:1d.0: PCI bridge to [bus 72]
[ 0.475562] pci 0000:00:1d.0: bridge window [mem 0xa2400000-0xa24fffff]
[ 0.475586] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.475595] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.475602] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.475609] pci_bus 0000:00: resource 7 [mem 0x70800000-0xbfffffff window]
[ 0.475616] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[ 0.475624] pci_bus 0000:01: resource 1 [mem 0xa2500000-0xa25fffff]
[ 0.475631] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.475638] pci_bus 0000:02: resource 1 [mem 0x8c000000-0xa23fffff]
[ 0.475644] pci_bus 0000:02: resource 2 [mem 0x6000000000-0x6021ffffff 64bit pref]
[ 0.475651] pci_bus 0000:3a: resource 0 [io 0x5000-0x5fff]
[ 0.475657] pci_bus 0000:3a: resource 1 [mem 0x74000000-0x8a3fffff]
[ 0.475663] pci_bus 0000:3a: resource 2 [mem 0x6030000000-0x6051ffffff 64bit pref]
[ 0.475671] pci_bus 0000:72: resource 1 [mem 0xa2400000-0xa24fffff]
[ 0.476285] PCI: CLS 0 bytes, default 64
[ 0.476299] DMAR: No ATSR found
[ 0.476300] DMAR: No SATC found
[ 0.476301] DMAR: IOMMU feature fl1gp_support inconsistent
[ 0.476302] DMAR: IOMMU feature pgsel_inv inconsistent
[ 0.476302] DMAR: IOMMU feature nwfs inconsistent
[ 0.476303] DMAR: IOMMU feature pds inconsistent
[ 0.476303] DMAR: IOMMU feature dit inconsistent
[ 0.476304] DMAR: IOMMU feature eafs inconsistent
[ 0.476304] DMAR: IOMMU feature prs inconsistent
[ 0.476304] DMAR: IOMMU feature nest inconsistent
[ 0.476305] DMAR: IOMMU feature mts inconsistent
[ 0.476305] DMAR: IOMMU feature sc_support inconsistent
[ 0.476305] DMAR: IOMMU feature dev_iotlb_support inconsistent
[ 0.476306] DMAR: dmar2: Using Queued invalidation
[ 0.476309] DMAR: dmar1: Using Queued invalidation
[ 0.476311] DMAR: dmar0: Using Queued invalidation
[ 0.476312] DMAR: dmar3: Using Queued invalidation
[ 0.476416] Trying to unpack rootfs image as initramfs...
[ 0.476635] pci 0000:00:00.0: Adding to iommu group 0
[ 0.476642] pci 0000:00:02.0: Adding to iommu group 1
[ 0.476649] pci 0000:00:04.0: Adding to iommu group 2
[ 0.476658] pci 0000:00:06.0: Adding to iommu group 3
[ 0.476665] pci 0000:00:07.0: Adding to iommu group 4
[ 0.476674] pci 0000:00:07.2: Adding to iommu group 5
[ 0.476680] pci 0000:00:0a.0: Adding to iommu group 6
[ 0.476693] pci 0000:00:0d.0: Adding to iommu group 7
[ 0.476699] pci 0000:00:0d.2: Adding to iommu group 7
[ 0.476705] pci 0000:00:0d.3: Adding to iommu group 7
[ 0.476713] pci 0000:00:12.0: Adding to iommu group 8
[ 0.476724] pci 0000:00:14.0: Adding to iommu group 9
[ 0.476737] pci 0000:00:14.2: Adding to iommu group 9
[ 0.476743] pci 0000:00:14.3: Adding to iommu group 10
[ 0.476754] pci 0000:00:15.0: Adding to iommu group 11
[ 0.476763] pci 0000:00:15.1: Adding to iommu group 11
[ 0.476771] pci 0000:00:16.0: Adding to iommu group 12
[ 0.476781] pci 0000:00:19.0: Adding to iommu group 13
[ 0.476788] pci 0000:00:19.1: Adding to iommu group 13
[ 0.476796] pci 0000:00:1d.0: Adding to iommu group 14
[ 0.476811] pci 0000:00:1f.0: Adding to iommu group 15
[ 0.476818] pci 0000:00:1f.3: Adding to iommu group 15
[ 0.476825] pci 0000:00:1f.4: Adding to iommu group 15
[ 0.476832] pci 0000:00:1f.5: Adding to iommu group 15
[ 0.476838] pci 0000:01:00.0: Adding to iommu group 16
[ 0.476847] pci 0000:72:00.0: Adding to iommu group 17
[ 0.477743] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.477744] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.477745] software IO TLB: mapped [mem 0x0000000050aeb000-0x0000000054aeb000] (64MB)
[ 0.477793] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28680fa287f, max_idle_ns: 440795281151 ns
[ 0.481363] clocksource: Switched to clocksource tsc
[ 0.481667] Initialise system trusted keyrings
[ 0.481675] Key type blacklist registered
[ 0.481703] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.482535] zbud: loaded
[ 0.482723] integrity: Platform Keyring initialized
[ 0.482724] Key type asymmetric registered
[ 0.482725] Asymmetric key parser 'x509' registered
[ 0.491766] Freeing initrd memory: 9392K
[ 0.494555] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 0.494570] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.494598] io scheduler mq-deadline registered
[ 0.497131] pcieport 0000:00:06.0: PME: Signaling with IRQ 124
[ 0.497318] pcieport 0000:00:07.0: PME: Signaling with IRQ 125
[ 0.497331] pcieport 0000:00:07.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.497560] pcieport 0000:00:07.2: PME: Signaling with IRQ 126
[ 0.497573] pcieport 0000:00:07.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.497760] pcieport 0000:00:1d.0: PME: Signaling with IRQ 127
[ 0.497852] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.498012] Monitor-Mwait will be used to enter C-1 state
[ 0.498018] Monitor-Mwait will be used to enter C-2 state
[ 0.498022] Monitor-Mwait will be used to enter C-3 state
[ 0.498025] ACPI: \_SB_.PR00: Found 3 idle states
[ 0.498463] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1499
[ 0.500196] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.500952] serial 0000:00:12.0: enabling device (0000 -> 0002)
[ 0.501592] hpet_acpi_add: no address or irqs in _CRS
[ 0.501606] Linux agpgart interface v0.103
[ 0.503225] tpm_tis STM0125:00: 2.0 TPM (device-id 0x0, rev-id 78)
[ 0.512693] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 0.513910] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.514372] i8042: Warning: Keylock active
[ 0.516847] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.516855] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.517045] mousedev: PS/2 mouse device common for all mice
[ 0.517092] rtc_cmos 00:01: RTC can wake from S4
[ 0.518051] rtc_cmos 00:01: registered as rtc0
[ 0.518255] rtc_cmos 00:01: setting system clock to 2022-05-03T07:56:32 UTC (1651564592)
[ 0.518265] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 0.518848] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.518864] intel_pstate: Intel P-state driver initializing
[ 0.519602] intel_pstate: HWP enabled
[ 0.519640] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.519826] efifb: probing for efifb
[ 0.519834] efifb: framebuffer at 0x4000000000, using 9024k, total 9024k
[ 0.519835] efifb: mode is 1920x1200x32, linelength=7680, pages=1
[ 0.519836] efifb: scrolling: redraw
[ 0.519837] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.519902] Console: switching to colour frame buffer device 240x75
[ 0.524438] fb0: EFI VGA frame buffer device
[ 0.524546] NET: Registered PF_INET6 protocol family
[ 0.528229] Segment Routing with IPv6
[ 0.528233] In-situ OAM (IOAM) with IPv6
[ 0.528247] mip6: Mobile IPv6
[ 0.528248] NET: Registered PF_PACKET protocol family
[ 0.528291] mpls_gso: MPLS GSO support
[ 0.528790] microcode: sig=0x806c1, pf=0x80, revision=0x9a
[ 0.528814] microcode: Microcode Update Driver: v2.2.
[ 0.528871] resctrl: L2 allocation detected
[ 0.528874] IPI shorthand broadcast: enabled
[ 0.528880] sched_clock: Marking stable (522045986, 6819939)->(540291519, -11425594)
[ 0.529040] registered taskstats version 1
[ 0.529042] Loading compiled-in X.509 certificates
[ 0.569858] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 0.569869] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[ 0.570612] zswap: loaded using pool lzo/zbud
[ 0.571066] Key type ._fscrypt registered
[ 0.571068] Key type .fscrypt registered
[ 0.571068] Key type fscrypt-provisioning registered
[ 0.573877] Key type encrypted registered
[ 0.573880] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.573950] integrity: Loading X.509 certificate: UEFI:db
[ 0.573968] integrity: Loaded X.509 cert 'Dell Inc.: Dell Bios DB Key: 637fa7a9f74471b406de0511557071fd41dd5487'
[ 0.573969] integrity: Loading X.509 certificate: UEFI:db
[ 0.573978] integrity: Loaded X.509 cert 'Dell Inc.: Dell Bios FW Aux Authority 2018: dd4df7c3f5ce7e5a77847915abc37b031f6b10bd'
[ 0.573978] integrity: Loading X.509 certificate: UEFI:db
[ 0.573990] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.573990] integrity: Loading X.509 certificate: UEFI:db
[ 0.574002] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.574139] ima: Allocated hash algorithm: sha256
[ 0.592861] ima: No architecture policies found
[ 0.592892] evm: Initialising EVM extended attributes:
[ 0.592893] evm: security.selinux
[ 0.592895] evm: security.SMACK64 (disabled)
[ 0.592896] evm: security.SMACK64EXEC (disabled)
[ 0.592897] evm: security.SMACK64TRANSMUTE (disabled)
[ 0.592898] evm: security.SMACK64MMAP (disabled)
[ 0.592899] evm: security.apparmor
[ 0.592899] evm: security.ima
[ 0.592900] evm: security.capability
[ 0.592901] evm: HMAC attrs: 0x1
[ 0.665684] Freeing unused decrypted memory: 2036K
[ 0.666050] Freeing unused kernel image (initmem) memory: 2496K
[ 0.678858] Write protecting the kernel read-only data: 24576k
[ 0.679559] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 0.679986] Freeing unused kernel image (rodata/data gap) memory: 1768K
[ 0.688799] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.688805] Run /init as init process
[ 0.688807] with arguments:
[ 0.688808] /init
[ 0.688809] with environment:
[ 0.688810] HOME=/
[ 0.688810] TERM=linux
[ 0.688811] BOOT_IMAGE=/vmlinuz-5.17.0-1-amd64
[ 0.796376] cryptd: max_cpu_qlen set to 1000
[ 0.807337] AVX2 version of gcm_enc/dec engaged.
[ 0.807378] AES CTR mode by8 optimization enabled
[ 0.810227] nvme nvme0: pci function 0000:01:00.0
[ 0.820318] nvme nvme0: 8/0/0 default/read/poll queues
[ 0.823024] nvme0n1: p1 p2 p3
[ 0.970469] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 0.970504] device-mapper: uevent: version 1.0.3
[ 0.970582] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@xxxxxxxxxx
[ 1.634478] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4716]
[ 1.664616] psmouse serio1: synaptics: queried min coordinates: x [1288..], y [1138..]
[ 1.664632] psmouse serio1: synaptics: Your touchpad (PNP: DLL0991 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@xxxxxxxxxxxxxxx.
[ 1.723745] psmouse serio1: synaptics: Touchpad model: 1, fw: 9.16, id: 0x1e2a1, caps: 0xf00123/0x840300/0x12e800/0x500000, board id: 3558, fw id: 3040414
[ 1.761523] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 11.544028] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none.
[ 11.563061] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 11.622314] systemd[1]: Inserted module 'autofs4'
[ 11.640266] systemd[1]: systemd 250.4-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 11.658899] systemd[1]: Detected architecture x86-64.
[ 11.659791] systemd[1]: Hostname set to <ortiz>.
[ 11.735118] systemd[1]: /lib/systemd/system/rstudio-server.service:11: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 11.743011] systemd[1]: Queued start job for default target Graphical Interface.
[ 11.776823] systemd[1]: Created slice Slice /system/getty.
[ 11.777477] systemd[1]: Created slice Slice /system/modprobe.
[ 11.778018] systemd[1]: Created slice Cryptsetup Units Slice.
[ 11.778479] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 11.778919] systemd[1]: Created slice User and Session Slice.
[ 11.779038] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 11.779102] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.779359] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.779440] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 11.779480] systemd[1]: Reached target User and Group Name Lookups.
[ 11.779504] systemd[1]: Reached target Remote File Systems.
[ 11.779521] systemd[1]: Reached target Slice Units.
[ 11.779552] systemd[1]: Reached target Swaps.
[ 11.779582] systemd[1]: Reached target Local Verity Protected Volumes.
[ 11.781779] systemd[1]: Listening on Process Core Dump Socket.
[ 11.781909] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 11.781993] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 11.782656] systemd[1]: Listening on Journal Audit Socket.
[ 11.782821] systemd[1]: Listening on Journal Socket (/dev/log).
[ 11.782954] systemd[1]: Listening on Journal Socket.
[ 11.783094] systemd[1]: Listening on udev Control Socket.
[ 11.783180] systemd[1]: Listening on udev Kernel Socket.
[ 11.784360] systemd[1]: Mounting Huge Pages File System...
[ 11.785456] systemd[1]: Mounting POSIX Message Queue File System...
[ 11.786595] systemd[1]: Mounting Kernel Debug File System...
[ 11.787654] systemd[1]: Mounting Kernel Trace File System...
[ 11.788742] systemd[1]: Starting Set the console keyboard layout...
[ 11.789594] systemd[1]: Starting Create List of Static Device Nodes...
[ 11.790452] systemd[1]: Starting Load Kernel Module configfs...
[ 11.791062] systemd[1]: Starting Load Kernel Module drm...
[ 11.791651] systemd[1]: Starting Load Kernel Module fuse...
[ 11.791722] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 11.793011] systemd[1]: Starting Journal Service...
[ 11.794404] systemd[1]: Starting Load Kernel Modules...
[ 11.795287] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 11.795369] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[ 11.796302] systemd[1]: Starting Coldplug All udev Devices...
[ 11.798198] systemd[1]: Mounted Huge Pages File System.
[ 11.798285] systemd[1]: Mounted POSIX Message Queue File System.
[ 11.798351] systemd[1]: Mounted Kernel Debug File System.
[ 11.798416] systemd[1]: Mounted Kernel Trace File System.
[ 11.798667] systemd[1]: Finished Set the console keyboard layout.
[ 11.798980] systemd[1]: Finished Create List of Static Device Nodes.
[ 11.799189] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 11.799307] systemd[1]: Finished Load Kernel Module configfs.
[ 11.800405] systemd[1]: Mounting Kernel Configuration File System...
[ 11.801175] EXT4-fs (dm-0): re-mounted. Quota mode: none.
[ 11.801299] fuse: init (API version 7.36)
[ 11.801962] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 11.802081] systemd[1]: Finished Load Kernel Module fuse.
[ 11.802719] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 11.802844] systemd[1]: Mounted Kernel Configuration File System.
[ 11.803716] systemd[1]: Mounting FUSE Control File System...
[ 11.803781] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 11.804782] systemd[1]: Starting Load/Save Random Seed...
[ 11.805718] systemd[1]: Starting Create System Users...
[ 11.807109] systemd[1]: Mounted FUSE Control File System.
[ 11.808613] lp: driver loaded but no devices found
[ 11.811821] ppdev: user-space parallel port driver
[ 11.813879] systemd[1]: Finished Load/Save Random Seed.
[ 11.814017] systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes).
[ 11.814548] systemd[1]: Finished Create System Users.
[ 11.815490] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 11.817557] ACPI: bus type drm_connector registered
[ 11.818100] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 11.818261] systemd[1]: Finished Load Kernel Module drm.
[ 11.820406] IPMI message handler: version 39.2
[ 11.821481] ipmi device interface
[ 11.822222] systemd[1]: Finished Load Kernel Modules.
[ 11.823137] systemd[1]: Starting Apply Kernel Variables...
[ 11.826563] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 11.826639] systemd[1]: Reached target Preparation for Local File Systems.
[ 11.827588] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 11.829036] systemd[1]: Finished Apply Kernel Variables.
[ 11.833534] systemd[1]: Started Journal Service.
[ 11.838583] systemd-journald[598]: Received client request to flush runtime journal.
[ 11.891862] ACPI: AC: AC Adapter [AC] (off-line)
[ 11.892447] input: Intel HID events as /devices/platform/INTC1051:00/input/input3
[ 11.892715] intel-hid INTC1051:00: platform supports 5 button array
[ 11.892755] input: Intel HID 5 button array as /devices/platform/INTC1051:00/input/input4
[ 11.898427] intel_pmc_core INT33A1:00: initialized
[ 11.898730] Userspace governor deprecated: use thermal netlink notification instead
[ 11.924676] hid: raw HID events driver (C) Jiri Kosina
[ 11.939927] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 11.940022] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 11.940069] wmi_bus wmi_bus-PNP0C14:02: WQBC data block query control method not found
[ 11.940071] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 11.954650] ACPI: button: Lid Switch [LID0]
[ 11.954771] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 11.954880] ACPI: button: Power Button [PBTN]
[ 11.957795] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 11.963494] ACPI: battery: Slot [BAT0] (battery present)
[ 11.963880] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 11.963917] acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 11.963957] acpi PNP0C14:06: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 11.963984] acpi PNP0C14:07: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 12.048915] ACPI: bus type thunderbolt registered
[ 12.058531] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 12.063719] intel_rapl_common: Found RAPL domain package
[ 12.067371] ACPI: bus type USB registered
[ 12.067401] usbcore: registered new interface driver usbfs
[ 12.067410] usbcore: registered new interface driver hub
[ 12.067423] usbcore: registered new device driver usb
[ 12.110669] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Quota mode: none.
[ 12.121942] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[ 12.121949] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
[ 12.123047] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[ 12.123216] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
[ 12.123219] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.123220] usb usb1: Product: xHCI Host Controller
[ 12.123221] usb usb1: Manufacturer: Linux 5.17.0-1-amd64 xhci-hcd
[ 12.123222] usb usb1: SerialNumber: 0000:00:0d.0
[ 12.123327] hub 1-0:1.0: USB hub found
[ 12.123336] hub 1-0:1.0: 1 port detected
[ 12.124667] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[ 12.124672] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
[ 12.124676] xhci_hcd 0000:00:0d.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 12.124718] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17
[ 12.124720] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.124721] usb usb2: Product: xHCI Host Controller
[ 12.124722] usb usb2: Manufacturer: Linux 5.17.0-1-amd64 xhci-hcd
[ 12.124723] usb usb2: SerialNumber: 0000:00:0d.0
[ 12.124801] hub 2-0:1.0: USB hub found
[ 12.124816] hub 2-0:1.0: 4 ports detected
[ 12.125999] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 12.126006] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 12.127284] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000000009810
[ 12.127573] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
[ 12.127576] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.127578] usb usb3: Product: xHCI Host Controller
[ 12.127579] usb usb3: Manufacturer: Linux 5.17.0-1-amd64 xhci-hcd
[ 12.127581] usb usb3: SerialNumber: 0000:00:14.0
[ 12.127757] hub 3-0:1.0: USB hub found
[ 12.127778] hub 3-0:1.0: 12 ports detected
[ 12.129705] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 12.129709] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 12.129712] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 12.129761] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17
[ 12.129764] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.129766] usb usb4: Product: xHCI Host Controller
[ 12.129767] usb usb4: Manufacturer: Linux 5.17.0-1-amd64 xhci-hcd
[ 12.129769] usb usb4: SerialNumber: 0000:00:14.0
[ 12.129939] hub 4-0:1.0: USB hub found
[ 12.129962] hub 4-0:1.0: 4 ports detected
[ 12.130281] usb: port power management may be unreliable
[ 12.132505] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 12.132768] cfg80211: Loaded X.509 cert 'benh@xxxxxxxxxx: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 12.133017] cfg80211: Loaded X.509 cert 'romain.perier@xxxxxxxxx: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 12.133252] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 12.134316] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 12.134426] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 12.143194] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 12.146798] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 12.147338] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 12.203188] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 12.203424] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 12.212750] rtsx_pci 0000:72:00.0: enabling device (0000 -> 0002)
[ 12.216058] Intel(R) Wireless WiFi driver for Linux
[ 12.216102] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[ 12.217781] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-QuZ-a0-hr-b0-69.ucode (-2)
[ 12.217838] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 12.217895] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-QuZ-a0-hr-b0-69.ucode failed with error -2
[ 12.217909] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-QuZ-a0-hr-b0-68.ucode (-2)
[ 12.217953] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-QuZ-a0-hr-b0-68.ucode failed with error -2
[ 12.217965] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-QuZ-a0-hr-b0-67.ucode (-2)
[ 12.218010] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-QuZ-a0-hr-b0-67.ucode failed with error -2
[ 12.218021] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-QuZ-a0-hr-b0-66.ucode (-2)
[ 12.218074] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-QuZ-a0-hr-b0-66.ucode failed with error -2
[ 12.218084] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-QuZ-a0-hr-b0-65.ucode (-2)
[ 12.218128] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-QuZ-a0-hr-b0-65.ucode failed with error -2
[ 12.218138] iwlwifi 0000:00:14.3: firmware: failed to load iwlwifi-QuZ-a0-hr-b0-64.ucode (-2)
[ 12.218185] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-QuZ-a0-hr-b0-64.ucode failed with error -2
[ 12.220584] iwlwifi 0000:00:14.3: firmware: direct-loading firmware iwlwifi-QuZ-a0-hr-b0-63.ucode
[ 12.220595] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
[ 12.220609] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[ 12.220922] iwlwifi 0000:00:14.3: loaded firmware version 63.c04f3485.0 QuZ-a0-hr-b0-63.ucode op_mode iwlmvm
[ 12.220937] iwlwifi 0000:00:14.3: firmware: failed to load iwl-debug-yoyo.bin (-2)
[ 12.231416] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[ 12.231588] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 12.231635] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 12.244509] i2c i2c-2: 8/8 memory slots populated (from DMI)
[ 12.244510] i2c i2c-2: Systems with more than 4 memory slots not supported yet, not instantiating SPD
[ 12.246810] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002)
[ 12.247118] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 12.264117] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 12.264122] checking generic (4000000000 8d0000) vs hw (6052000000 1000000)
[ 12.264124] checking generic (4000000000 8d0000) vs hw (4000000000 10000000)
[ 12.264126] fb0: switching to i915 from EFI VGA
[ 12.264216] Console: switching to colour dummy device 80x25
[ 12.264257] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 12.264300] i915 0000:00:02.0: [drm] Transparent Hugepage mode 'huge=within_size'
[ 12.270097] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 12.271284] i915 0000:00:02.0: firmware: direct-loading firmware i915/tgl_dmc_ver2_12.bin
[ 12.271818] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
[ 12.278674] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002)
[ 12.278960] idma64 idma64.3: Found Intel integrated DMA 64-bit
[ 12.294685] pstore: Using crash dump compression: deflate
[ 12.294690] pstore: Registered efi as persistent store backend
[ 12.422253] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 12.425896] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.429067] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 12.432189] fbcon: i915drmfb (fb0) is primary device
[ 12.437683] Console: switching to colour frame buffer device 240x75
[ 12.452480] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 12.453395] resource sanity check: requesting [mem 0xfedc0000-0xfedcdfff], which spans more than pnp 00:05 [mem 0xfedc0000-0xfedc7fff]
[ 12.453400] caller __uncore_imc_init_box+0xc1/0x100 [intel_uncore] mapping multiple BARs
[ 12.460638] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 12.466650] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[ 12.595044] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 12.598828] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[ 12.601027] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX203, REV=0x351
[ 12.601074] thermal thermal_zone7: failed to read out thermal zone (-61)
[ 12.621718] usb 3-3: New USB device found, idVendor=27c6, idProduct=533c, bcdDevice= 1.00
[ 12.621722] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 12.621723] usb 3-3: Product: FingerPrint
[ 12.621724] usb 3-3: Manufacturer: Goodix
[ 12.708056] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[ 12.724553] iwlwifi 0000:00:14.3: Detected RF HR B3, rfid=0x10a100
[ 12.758652] usb 3-6: new high-speed USB device number 3 using xhci_hcd
[ 12.789745] iwlwifi 0000:00:14.3: base HW address: 80:32:53:54:cb:0d
[ 12.855193] input: Dell WMI hotkeys as /devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9
[ 12.917295] usb 3-6: New USB device found, idVendor=0bda, idProduct=5517, bcdDevice= 4.21
[ 12.917300] usb 3-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 12.917302] usb 3-6: Product: Integrated_Webcam_HD
[ 12.917303] usb 3-6: Manufacturer: Integrated_Webcam_HD
[ 12.917304] usb 3-6: SerialNumber: 200901010001
[ 13.003131] intel_rapl_msr: PL4 support detected.
[ 13.003289] intel_rapl_common: Found RAPL domain package
[ 13.003293] intel_rapl_common: Found RAPL domain core
[ 13.003295] intel_rapl_common: Found RAPL domain uncore
[ 13.003297] intel_rapl_common: Found RAPL domain psys
[ 13.027841] input: DLL0945:00 06CB:CDE6 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL0945:00/0018:06CB:CDE6.0001/input/input10
[ 13.028033] input: DLL0945:00 06CB:CDE6 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL0945:00/0018:06CB:CDE6.0001/input/input11
[ 13.028125] hid-generic 0018:06CB:CDE6.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL0945:00 06CB:CDE6] on i2c-DLL0945:00
[ 13.030289] iTCO_vendor_support: vendor-support=0
[ 13.033639] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[ 13.033838] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.042052] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[ 13.050638] usb 3-10: new full-speed USB device number 4 using xhci_hcd
[ 13.057812] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=1
[ 13.060538] hid-generic 001F:8087:0AC2.0002: hidraw1: <UNKNOWN> HID v2.00 Device [hid-ishtp 8087:0AC2] on
[ 13.064051] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0
[ 13.082909] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 13.083434] sof-audio-pci-intel-tgl 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[ 13.083455] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002)
[ 13.083655] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[ 13.083749] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 13.090381] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode
[ 13.143874] input: DLL0945:00 06CB:CDE6 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL0945:00/0018:06CB:CDE6.0001/input/input13
[ 13.144713] input: DLL0945:00 06CB:CDE6 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL0945:00/0018:06CB:CDE6.0001/input/input14
[ 13.145512] hid-multitouch 0018:06CB:CDE6.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL0945:00 06CB:CDE6] on i2c-DLL0945:00
[ 13.192688] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 5
[ 13.192694] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
[ 13.192700] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 2
[ 13.194472] sof-audio-pci-intel-tgl 0000:00:1f.3: firmware: direct-loading firmware intel/sof/sof-tgl.ri
[ 13.205592] usb 3-10: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
[ 13.205599] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 13.268324] mc: Linux media interface: v0.10
[ 13.270036] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 13.280467] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 1:6:0-18fab
[ 13.280472] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:17:0 Kernel ABI 3:18:0
[ 13.287021] videodev: Linux video capture interface: v2.00
[ 13.319595] sof-audio-pci-intel-tgl 0000:00:1f.3: firmware: direct-loading firmware intel/sof-tplg/sof-hda-generic-2ch.tplg
[ 13.319610] sof-audio-pci-intel-tgl 0000:00:1f.3: Topology: ABI 3:17:0 Kernel ABI 3:18:0
[ 13.319955] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred
[ 13.368190] usb 3-6: Found UVC 1.10 device Integrated_Webcam_HD (0bda:5517)
[ 13.370995] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/input/input16
[ 13.371431] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC289: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 13.371435] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.371437] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 13.371438] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0
[ 13.371440] snd_hda_codec_realtek ehdaudio0D0: inputs:
[ 13.371441] snd_hda_codec_realtek ehdaudio0D0: Headset Mic=0x19
[ 13.371443] snd_hda_codec_realtek ehdaudio0D0: Headphone Mic=0x1b
[ 13.371444] usb 3-6: Found UVC 1.50 device Integrated_Webcam_HD (0bda:5517)
[ 13.372412] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/input/input17
[ 13.372485] usbcore: registered new interface driver uvcvideo
[ 13.494012] Bluetooth: Core ver 2.22
[ 13.494047] NET: Registered PF_BLUETOOTH protocol family
[ 13.494048] Bluetooth: HCI device and connection manager initialized
[ 13.494053] Bluetooth: HCI socket layer initialized
[ 13.494056] Bluetooth: L2CAP socket layer initialized
[ 13.494059] Bluetooth: SCO socket layer initialized
[ 13.527114] usbcore: registered new interface driver btusb
[ 13.527950] Bluetooth: hci0: Bootloader revision 0.4 build 0 week 30 2018
[ 13.528877] Bluetooth: hci0: Device revision is 2
[ 13.528879] Bluetooth: hci0: Secure boot is enabled
[ 13.528879] Bluetooth: hci0: OTP lock is enabled
[ 13.528880] Bluetooth: hci0: API lock is enabled
[ 13.528881] Bluetooth: hci0: Debug lock is disabled
[ 13.528881] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 13.530497] bluetooth hci0: firmware: direct-loading firmware intel/ibt-19-0-4.sfi
[ 13.530500] Bluetooth: hci0: Found device firmware: intel/ibt-19-0-4.sfi
[ 13.530548] Bluetooth: hci0: Boot Address: 0x24800
[ 13.530549] Bluetooth: hci0: Firmware Version: 191-21.21
[ 13.616548] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.616552] Bluetooth: BNEP filters: protocol multicast
[ 13.616555] Bluetooth: BNEP socket layer initialized
[ 14.174900] snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten
[ 14.174911] snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten
[ 14.175107] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten
[ 14.175112] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten
[ 14.175116] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten
[ 14.175120] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten
[ 14.175123] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten
[ 14.175128] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten
[ 14.175133] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten
[ 14.175138] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten
[ 14.175144] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten
[ 14.175148] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten
[ 14.175153] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten
[ 14.175164] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3
[ 14.175166] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 4
[ 14.175168] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 5
[ 14.175170] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 6
[ 14.175171] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 7
[ 14.175172] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 8
[ 14.196073] input: sof-hda-dsp Headphone Mic as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input18
[ 14.196145] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input19
[ 14.196234] input: sof-hda-dsp HDMI/DP,pcm=4 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input20
[ 14.196317] input: sof-hda-dsp HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input21
[ 15.110315] rfkill: input handler disabled
[ 15.537709] Bluetooth: hci0: Waiting for firmware download to complete
[ 15.537790] Bluetooth: hci0: Firmware loaded in 1960242 usecs
[ 15.537857] Bluetooth: hci0: Waiting for device to boot
[ 15.552825] Bluetooth: hci0: Device booted in 14652 usecs
[ 15.552999] bluetooth hci0: firmware: direct-loading firmware intel/ibt-19-0-4.ddc
[ 15.553005] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-19-0-4.ddc
[ 15.555066] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 15.555804] Bluetooth: hci0: Firmware revision 0.0 build 191 week 21 2021
[ 15.624536] NET: Registered PF_ALG protocol family
[ 16.530310] wlp0s20f3: authenticate with c8:0e:14:f8:f4:26
[ 16.534973] wlp0s20f3: send auth to c8:0e:14:f8:f4:26 (try 1/3)
[ 16.601644] wlp0s20f3: authenticated
[ 16.602615] wlp0s20f3: associate with c8:0e:14:f8:f4:26 (try 1/3)
[ 16.605804] wlp0s20f3: RX AssocResp from c8:0e:14:f8:f4:26 (capab=0x1511 status=0 aid=2)
[ 16.611401] wlp0s20f3: associated
[ 16.683139] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by c8:0e:14:f8:f4:26
[ 16.719152] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
[ 17.337844] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 17.339977] Bridge firewalling registered
[ 17.398221] Initializing XFRM netlink socket
[ 43.254194] systemd-journald[598]: Time jumped backwards, rotating.
[ 268.572119] usb 3-4: new full-speed USB device number 5 using xhci_hcd
[ 268.798534] usb 3-4: New USB device found, idVendor=062a, idProduct=4c01, bcdDevice= 1.07
[ 268.798543] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 268.798545] usb 3-4: Product: 2.4G INPUT DEVICE
[ 268.798548] usb 3-4: Manufacturer: MOSART Semi.
[ 268.829060] input: MOSART Semi. 2.4G INPUT DEVICE as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:062A:4C01.0003/input/input22
[ 268.888558] hid-generic 0003:062A:4C01.0003: input,hidraw1: USB HID v1.10 Keyboard [MOSART Semi. 2.4G INPUT DEVICE] on usb-0000:00:14.0-4/input0
[ 268.890765] input: MOSART Semi. 2.4G INPUT DEVICE Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:062A:4C01.0004/input/input23
[ 268.890913] input: MOSART Semi. 2.4G INPUT DEVICE Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:062A:4C01.0004/input/input24
[ 268.952358] input: MOSART Semi. 2.4G INPUT DEVICE System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:062A:4C01.0004/input/input25
[ 268.952460] input: MOSART Semi. 2.4G INPUT DEVICE as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:062A:4C01.0004/input/input26
[ 268.952830] hid-generic 0003:062A:4C01.0004: input,hiddev0,hidraw2: USB HID v1.10 Mouse [MOSART Semi. 2.4G INPUT DEVICE] on usb-0000:00:14.0-4/input1
[ 268.952907] usbcore: registered new interface driver usbhid
[ 268.952910] usbhid: USB HID core driver
[ 272.532159] usb usb2-port3: Cannot enable. Maybe the USB cable is bad?
[ 276.644195] usb usb2-port3: Cannot enable. Maybe the USB cable is bad?
[ 276.644295] usb usb2-port3: attempt power cycle
[ 281.056267] usb usb2-port3: Cannot enable. Maybe the USB cable is bad?
[ 285.188320] usb usb2-port3: Cannot enable. Maybe the USB cable is bad?
[ 285.188404] usb usb2-port3: unable to enumerate USB device
[ 326.633076] wlp0s20f3: disconnect from AP c8:0e:14:f8:f4:26 for new auth to 2c:3a:fd:c0:b9:af
[ 326.701289] wlp0s20f3: authenticate with 2c:3a:fd:c0:b9:af
[ 326.705042] wlp0s20f3: send auth to 2c:3a:fd:c0:b9:af (try 1/3)
[ 326.732789] wlp0s20f3: authenticated
[ 326.736604] wlp0s20f3: associate with 2c:3a:fd:c0:b9:af (try 1/3)
[ 326.739213] wlp0s20f3: RX ReassocResp from 2c:3a:fd:c0:b9:af (capab=0x1511 status=0 aid=2)
[ 326.743049] wlp0s20f3: associated
[ 326.827696] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 2c:3a:fd:c0:b9:af
[ 1003.400066] wlp0s20f3: disconnect from AP 2c:3a:fd:c0:b9:af for new auth to c8:0e:14:f8:f4:26
[ 1003.469331] wlp0s20f3: authenticate with c8:0e:14:f8:f4:26
[ 1003.472886] wlp0s20f3: send auth to c8:0e:14:f8:f4:26 (try 1/3)
[ 1003.502363] wlp0s20f3: authenticated
[ 1003.503480] wlp0s20f3: associate with c8:0e:14:f8:f4:26 (try 1/3)
[ 1003.505932] wlp0s20f3: RX ReassocResp from c8:0e:14:f8:f4:26 (capab=0x1511 status=0 aid=2)
[ 1003.511127] wlp0s20f3: associated
[ 1003.593289] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by c8:0e:14:f8:f4:26
[ 1003.852450] wlp0s20f3: disconnect from AP c8:0e:14:f8:f4:26 for new auth to c8:0e:14:f8:f4:25
[ 1003.940991] wlp0s20f3: authenticate with c8:0e:14:f8:f4:25
[ 1003.941004] wlp0s20f3: bad VHT capabilities, disabling VHT
[ 1003.941005] wlp0s20f3: 80 MHz not supported, disabling VHT
[ 1003.944111] wlp0s20f3: send auth to c8:0e:14:f8:f4:25 (try 1/3)
[ 1003.976466] wlp0s20f3: authenticated
[ 1003.979457] wlp0s20f3: associate with c8:0e:14:f8:f4:25 (try 1/3)
[ 1003.985557] wlp0s20f3: RX ReassocResp from c8:0e:14:f8:f4:25 (capab=0x1431 status=0 aid=4)
[ 1003.991741] wlp0s20f3: associated
[ 1004.076594] wlp0s20f3: Limiting TX power to 20 (20 - 0) dBm as advertised by c8:0e:14:f8:f4:25
[ 1085.579817] wlp0s20f3: disconnect from AP c8:0e:14:f8:f4:25 for new auth to c8:0e:14:f8:f4:26
[ 1085.654432] wlp0s20f3: authenticate with c8:0e:14:f8:f4:26
[ 1085.658722] wlp0s20f3: send auth to c8:0e:14:f8:f4:26 (try 1/3)
[ 1085.685264] wlp0s20f3: authenticated
[ 1085.687323] wlp0s20f3: associate with c8:0e:14:f8:f4:26 (try 1/3)
[ 1085.689841] wlp0s20f3: RX ReassocResp from c8:0e:14:f8:f4:26 (capab=0x1511 status=0 aid=2)
[ 1085.695065] wlp0s20f3: associated
[ 1085.717798] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by c8:0e:14:f8:f4:26
[ 7380.279096] wlp0s20f3: deauthenticating from c8:0e:14:f8:f4:26 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7380.690535] PM: suspend entry (s2idle)
[ 7380.696896] Filesystems sync: 0.006 seconds
[ 7380.697017] (NULL device *): firmware: direct-loading firmware i915/tgl_dmc_ver2_12.bin
[ 7380.697149] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[ 7380.697158] (NULL device *): firmware: direct-loading firmware regulatory.db
[ 7380.697273] (NULL device *): firmware: direct-loading firmware intel/ibt-19-0-4.ddc
[ 7380.697296] (NULL device *): firmware: direct-loading firmware intel/sof-tplg/sof-hda-generic-2ch.tplg
[ 7380.697473] (NULL device *): firmware: direct-loading firmware intel/ibt-19-0-4.sfi
[ 7380.697540] (NULL device *): firmware: direct-loading firmware iwlwifi-QuZ-a0-hr-b0-63.ucode
[ 7380.813979] Freezing user space processes ... (elapsed 0.003 seconds) done.
[ 7380.817433] OOM killer disabled.
[ 7380.817435] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 7380.818777] printk: Suspending console(s) (use no_console_suspend to debug)
[ 7381.027577] psmouse serio1: Failed to disable mouse on isa0060/serio1
[ 7382.392940] ACPI: EC: interrupt blocked
[ 9773.249479] ACPI: EC: interrupt unblocked
[ 9774.007938] OOM killer enabled.
[ 9774.007942] Restarting tasks ...
[ 9774.008364] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[ 9774.019309] done.
[ 9774.074513] PM: suspend exit
[ 9777.183572] wlp0s20f3: authenticate with 2c:3a:fd:c0:b9:af
[ 9777.188069] wlp0s20f3: send auth to 2c:3a:fd:c0:b9:af (try 1/3)
[ 9777.220655] wlp0s20f3: authenticated
[ 9777.226274] wlp0s20f3: associate with 2c:3a:fd:c0:b9:af (try 1/3)
[ 9777.229072] wlp0s20f3: RX AssocResp from 2c:3a:fd:c0:b9:af (capab=0x1511 status=0 aid=1)
[ 9777.233529] wlp0s20f3: associated
[ 9777.314638] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 2c:3a:fd:c0:b9:af
[ 9777.314729] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
[ 9849.490757] wlp0s20f3: disconnect from AP 2c:3a:fd:c0:b9:af for new auth to c8:0e:14:f8:f4:26
[ 9849.540287] wlp0s20f3: authenticate with c8:0e:14:f8:f4:26
[ 9849.544814] wlp0s20f3: send auth to c8:0e:14:f8:f4:26 (try 1/3)
[ 9849.572805] wlp0s20f3: authenticated
[ 9849.573927] wlp0s20f3: associate with c8:0e:14:f8:f4:26 (try 1/3)
[ 9849.576757] wlp0s20f3: RX ReassocResp from c8:0e:14:f8:f4:26 (capab=0x1511 status=0 aid=2)
[ 9849.582365] wlp0s20f3: associated
[ 9849.662347] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by c8:0e:14:f8:f4:26
[10114.069601] kauditd_printk_skb: 13 callbacks suppressed
[21509.035872] wlp0s20f3: deauthenticating from c8:0e:14:f8:f4:26 by local choice (Reason: 3=DEAUTH_LEAVING)
[21509.281268] PM: suspend entry (s2idle)
[21509.292917] Filesystems sync: 0.011 seconds
[21509.293090] (NULL device *): firmware: direct-loading firmware i915/tgl_dmc_ver2_12.bin
[21509.293273] (NULL device *): firmware: direct-loading firmware regulatory.db
[21509.293274] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[21509.293432] (NULL device *): firmware: direct-loading firmware intel/ibt-19-0-4.ddc
[21509.293449] (NULL device *): firmware: direct-loading firmware intel/sof-tplg/sof-hda-generic-2ch.tplg
[21509.293733] (NULL device *): firmware: direct-loading firmware iwlwifi-QuZ-a0-hr-b0-63.ucode
[21509.293819] (NULL device *): firmware: direct-loading firmware intel/ibt-19-0-4.sfi
[21509.410489] Freezing user space processes ... (elapsed 0.003 seconds) done.
[21509.413853] OOM killer disabled.
[21509.413855] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[21509.415200] printk: Suspending console(s) (use no_console_suspend to debug)
[21509.996413] ACPI: EC: interrupt blocked
[83803.724413] ACPI: EC: interrupt unblocked
[83804.530292] OOM killer enabled.
[83804.530296] Restarting tasks ... done.
[83804.570080] usb 3-4: USB disconnect, device number 5
[83804.610698] PM: suspend exit
[83804.844778] usb 2-3: new SuperSpeed Plus Gen 2x1 USB device number 6 using xhci_hcd
[83804.867580] usb 2-3: New USB device found, idVendor=2109, idProduct=0820, bcdDevice=30.03
[83804.867590] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[83804.867593] usb 2-3: Product: USB3.1 Hub
[83804.867595] usb 2-3: Manufacturer: VIA Labs, Inc.
[83804.869929] hub 2-3:1.0: USB hub found
[83804.870542] hub 2-3:1.0: 4 ports detected
[83804.937366] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[83805.100757] usb 3-4: new high-speed USB device number 6 using xhci_hcd
[83805.251321] usb 3-4: New USB device found, idVendor=2109, idProduct=2820, bcdDevice=30.03
[83805.251325] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[83805.251326] usb 3-4: Product: USB2.0 Hub
[83805.251327] usb 3-4: Manufacturer: VIA Labs, Inc.
[83805.252219] hub 3-4:1.0: USB hub found
[83805.252507] hub 3-4:1.0: 5 ports detected
[83805.964701] usb 3-4.1: new full-speed USB device number 7 using xhci_hcd
[83806.120842] usb 3-4.1: New USB device found, idVendor=06c4, idProduct=c412, bcdDevice= 0.06
[83806.120848] usb 3-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[83806.120850] usb 3-4.1: Product: DELL DA300
[83806.120852] usb 3-4.1: Manufacturer: Bizlink
[83806.120853] usb 3-4.1: SerialNumber: MCU Ver0006
[83806.131660] hid-generic 0003:06C4:C412.0005: hiddev0,hidraw1: USB HID v1.11 Device [Bizlink DELL DA300] on usb-0000:00:14.0-4.1/input0
[83806.744740] usb 2-3.2: new SuperSpeed USB device number 7 using xhci_hcd
[83806.765367] usb 2-3.2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
[83806.765371] usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[83806.765372] usb 2-3.2: Product: USB 10/100/1000 LAN
[83806.765373] usb 2-3.2: Manufacturer: Realtek
[83806.765374] usb 2-3.2: SerialNumber: 001000001
[83806.793109] usbcore: registered new interface driver r8152
[83806.797261] usbcore: registered new interface driver cdc_ether
[83806.873040] usb 2-3.2: reset SuperSpeed USB device number 7 using xhci_hcd
[83806.895694] r8152 2-3.2:1.0: firmware: failed to load rtl_nic/rtl8153b-2.fw (-2)
[83806.895699] r8152 2-3.2:1.0: Direct firmware load for rtl_nic/rtl8153b-2.fw failed with error -2
[83806.895700] r8152 2-3.2:1.0: unable to load firmware patch rtl_nic/rtl8153b-2.fw (-2)
[83806.895776] r8152 2-3.2:1.0 (unnamed net_device) (uninitialized): Using pass-thru MAC addr cc:48:3a:b7:7a:a9
[83806.929180] r8152 2-3.2:1.0 eth0: v1.12.12
[83806.996709] usb 3-4.3: new low-speed USB device number 9 using xhci_hcd
[83807.149887] usb 3-4.3: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00
[83807.149910] usb 3-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[83807.149913] usb 3-4.3: Product: Dell MS116 USB Optical Mouse
[83807.149914] usb 3-4.3: Manufacturer: PixArt
[83807.155362] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.3/3-4.3:1.0/0003:413C:301A.0006/input/input31
[83807.155617] hid-generic 0003:413C:301A.0006: input,hidraw2: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-4.3/input0
[83807.320869] r8152 2-3.2:1.0 enxcc483ab77aa9: renamed from eth0
[83808.630142] wlp0s20f3: authenticate with 6c:f3:7f:10:93:48
[83808.630153] wlp0s20f3: bad VHT capabilities, disabling VHT
[83808.633675] wlp0s20f3: send auth to 6c:f3:7f:10:93:48 (try 1/3)
[83808.660674] wlp0s20f3: authenticated
[83808.660848] wlp0s20f3: VHT capa missing/short, disabling VHT/HE
[83808.668734] wlp0s20f3: associate with 6c:f3:7f:10:93:48 (try 1/3)
[83808.671986] wlp0s20f3: RX AssocResp from 6c:f3:7f:10:93:48 (capab=0x411 status=0 aid=2)
[83808.677495] wlp0s20f3: associated
[83809.149470] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
[83810.432203] IPv6: ADDRCONF(NETDEV_CHANGE): enxcc483ab77aa9: link becomes ready
[83810.432657] r8152 2-3.2:1.0 enxcc483ab77aa9: carrier on
[91572.923597] wlp0s20f3: deauthenticating from 6c:f3:7f:10:93:48 by local choice (Reason: 3=DEAUTH_LEAVING)
[91573.085228] PM: suspend entry (s2idle)
[91573.088901] Filesystems sync: 0.003 seconds
[91573.088992] (NULL device *): firmware: direct-loading firmware i915/tgl_dmc_ver2_12.bin
[91573.089083] (NULL device *): firmware: direct-loading firmware regulatory.db
[91573.089085] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[91573.089134] (NULL device *): firmware: direct-loading firmware intel/sof-tplg/sof-hda-generic-2ch.tplg
[91573.089173] (NULL device *): firmware: direct-loading firmware intel/ibt-19-0-4.ddc
[91573.089213] (NULL device *): firmware: direct-loading firmware iwlwifi-QuZ-a0-hr-b0-63.ucode
[91573.089265] (NULL device *): firmware: direct-loading firmware intel/ibt-19-0-4.sfi
[91573.205808] Freezing user space processes ... (elapsed 0.003 seconds) done.
[91573.208955] OOM killer disabled.
[91573.208956] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[91573.210231] printk: Suspending console(s) (use no_console_suspend to debug)
[91573.759528] ACPI: EC: interrupt blocked
[92014.681919] ACPI: EC: interrupt unblocked
[92015.348929] usb 2-3: Disable of device-initiated U1 failed.
[92015.356134] usb 2-3: Disable of device-initiated U2 failed.
[92015.483730] usb 2-3: reset SuperSpeed Plus Gen 2x1 USB device number 6 using xhci_hcd
[92015.487318] usb 3-4: reset high-speed USB device number 6 using xhci_hcd
[92016.099330] usb 2-3.2: reset SuperSpeed USB device number 7 using xhci_hcd
[92016.122416] r8152 2-3.2:1.0: skip request firmware
[92016.122539] r8152 2-3.2:1.0 enxcc483ab77aa9: Using pass-thru MAC addr cc:48:3a:b7:7a:a9
[92016.591310] usb 3-4.3: reset low-speed USB device number 9 using xhci_hcd
[92017.055147] usb 3-4.1: reset full-speed USB device number 7 using xhci_hcd
[92017.216061] OOM killer enabled.
[92017.216063] Restarting tasks ... done.
[92017.222100] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[92017.304298] PM: suspend exit
[92019.807860] IPv6: ADDRCONF(NETDEV_CHANGE): enxcc483ab77aa9: link becomes ready
[92019.808184] r8152 2-3.2:1.0 enxcc483ab77aa9: carrier on
[92021.246946] wlp0s20f3: authenticate with 6c:f3:7f:10:93:48
[92021.246961] wlp0s20f3: bad VHT capabilities, disabling VHT
[92021.250850] wlp0s20f3: send auth to 6c:f3:7f:10:93:48 (try 1/3)
[92021.277676] wlp0s20f3: authenticated
[92021.277934] wlp0s20f3: VHT capa missing/short, disabling VHT/HE
[92021.278833] wlp0s20f3: associate with 6c:f3:7f:10:93:48 (try 1/3)
[92021.282256] wlp0s20f3: RX AssocResp from 6c:f3:7f:10:93:48 (capab=0x411 status=0 aid=6)
[92021.288260] wlp0s20f3: associated
[92021.771203] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
[96910.410415] perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[104194.726321] wlp0s20f3: authenticate with 6c:f3:7f:10:b4:68
[104194.726348] wlp0s20f3: bad VHT capabilities, disabling VHT
[104194.731971] wlp0s20f3: send auth to 6c:f3:7f:10:b4:68 (try 1/3)
[104194.759792] wlp0s20f3: authenticated
[104194.760175] wlp0s20f3: VHT capa missing/short, disabling VHT/HE
[104194.763953] wlp0s20f3: associate with 6c:f3:7f:10:b4:68 (try 1/3)
[104194.767390] wlp0s20f3: RX AssocResp from 6c:f3:7f:10:b4:68 (capab=0x411 status=0 aid=8)
[104194.773908] wlp0s20f3: associated
[104226.804647] wlp0s20f3: disconnect from AP 6c:f3:7f:10:b4:68 for new auth to 6c:f3:7f:10:b4:60
[104226.866050] wlp0s20f3: authenticate with 6c:f3:7f:10:b4:60
[104226.866074] wlp0s20f3: bad VHT capabilities, disabling VHT
[104226.866076] wlp0s20f3: 80 MHz not supported, disabling VHT
[104226.868921] wlp0s20f3: send auth to 6c:f3:7f:10:b4:60 (try 1/3)
[104226.915364] wlp0s20f3: authenticated
[104226.919963] wlp0s20f3: associate with 6c:f3:7f:10:b4:60 (try 1/3)
[104226.982773] wlp0s20f3: RX ReassocResp from 6c:f3:7f:10:b4:60 (capab=0x431 status=0 aid=4)
[104226.987121] wlp0s20f3: associated
[104258.996620] wlp0s20f3: disconnect from AP 6c:f3:7f:10:b4:60 for new auth to 6c:f3:7f:10:93:48
[104259.066688] wlp0s20f3: authenticate with 6c:f3:7f:10:93:48
[104259.066712] wlp0s20f3: bad VHT capabilities, disabling VHT
[104259.071460] wlp0s20f3: send auth to 6c:f3:7f:10:93:48 (try 1/3)
[104259.098247] wlp0s20f3: authenticated
[104259.098547] wlp0s20f3: VHT capa missing/short, disabling VHT/HE
[104259.099877] wlp0s20f3: associate with 6c:f3:7f:10:93:48 (try 1/3)
[104259.103113] wlp0s20f3: RX ReassocResp from 6c:f3:7f:10:93:48 (capab=0x411 status=0 aid=2)
[104259.108719] wlp0s20f3: associated
[113214.123592] usb 3-4: USB disconnect, device number 6
[113214.123596] usb 3-4.1: USB disconnect, device number 7
[113214.124497] usb 3-4.3: USB disconnect, device number 9
[113214.489380] usb 3-4: new high-speed USB device number 10 using xhci_hcd
[113214.573484] usb 2-3: USB disconnect, device number 6
[113214.573488] usb 2-3.2: USB disconnect, device number 7
[113217.708840] wlp0s20f3: deauthenticating from 6c:f3:7f:10:93:48 by local choice (Reason: 3=DEAUTH_LEAVING)
[113217.942187] PM: suspend entry (s2idle)
[113217.997533] Filesystems sync: 0.055 seconds
[113217.997652] (NULL device *): firmware: direct-loading firmware i915/tgl_dmc_ver2_12.bin
[113217.997783] (NULL device *): firmware: direct-loading firmware regulatory.db
[113217.997861] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[113217.997877] (NULL device *): firmware: direct-loading firmware intel/sof-tplg/sof-hda-generic-2ch.tplg
[113217.997882] (NULL device *): firmware: direct-loading firmware intel/ibt-19-0-4.ddc
[113217.998015] (NULL device *): firmware: direct-loading firmware iwlwifi-QuZ-a0-hr-b0-63.ucode
[113217.998130] (NULL device *): firmware: direct-loading firmware intel/ibt-19-0-4.sfi
[113218.267983] Freezing user space processes ... (elapsed 0.003 seconds) done.
[113218.271713] OOM killer disabled.
[113218.271715] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[113218.273160] printk: Suspending console(s) (use no_console_suspend to debug)
[113218.855404] ACPI: EC: interrupt blocked
[175300.592925] ACPI: EC: interrupt unblocked
[175302.038048] OOM killer enabled.
[175302.038053] Restarting tasks ...
[175302.039537] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[175302.045068] done.
[175302.106930] PM: suspend exit
[175304.497598] usb 3-4: new high-speed USB device number 11 using xhci_hcd
[175304.573735] usb 2-3: new SuperSpeed Plus Gen 2x1 USB device number 8 using xhci_hcd
[175304.596643] usb 2-3: New USB device found, idVendor=2109, idProduct=0820, bcdDevice=30.03
[175304.596650] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[175304.596651] usb 2-3: Product: USB3.1 Hub
[175304.596652] usb 2-3: Manufacturer: VIA Labs, Inc.
[175304.599020] hub 2-3:1.0: USB hub found
[175304.599289] hub 2-3:1.0: 4 ports detected
[175304.648465] usb 3-4: New USB device found, idVendor=2109, idProduct=2820, bcdDevice=30.03
[175304.648470] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[175304.648471] usb 3-4: Product: USB2.0 Hub
[175304.648472] usb 3-4: Manufacturer: VIA Labs, Inc.
[175304.649360] hub 3-4:1.0: USB hub found
[175304.649627] hub 3-4:1.0: 5 ports detected
[175304.935576] usb 2-3: USB disconnect, device number 8
[175305.285063] usb 2-3: new SuperSpeed Plus Gen 2x1 USB device number 9 using xhci_hcd
[175305.304451] usb 2-3: New USB device found, idVendor=2109, idProduct=0820, bcdDevice=30.03
[175305.304456] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[175305.304457] usb 2-3: Product: USB3.1 Hub
[175305.304460] usb 2-3: Manufacturer: VIA Labs, Inc.
[175305.306782] hub 2-3:1.0: USB hub found
[175305.307049] hub 2-3:1.0: 4 ports detected
[175305.361603] usb 3-4.1: new full-speed USB device number 12 using xhci_hcd
[175305.516646] usb 3-4.1: New USB device found, idVendor=06c4, idProduct=c412, bcdDevice= 0.06
[175305.516650] usb 3-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[175305.516651] usb 3-4.1: Product: DELL DA300
[175305.516652] usb 3-4.1: Manufacturer: Bizlink
[175305.516653] usb 3-4.1: SerialNumber: MCU Ver0006
[175305.526658] hid-generic 0003:06C4:C412.0007: hiddev0,hidraw1: USB HID v1.11 Device [Bizlink DELL DA300] on usb-0000:00:14.0-4.1/input0
[175305.657698] usb 3-4.3: new low-speed USB device number 13 using xhci_hcd
[175305.810612] usb 3-4.3: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00
[175305.810616] usb 3-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[175305.810617] usb 3-4.3: Product: Dell MS116 USB Optical Mouse
[175305.810618] usb 3-4.3: Manufacturer: PixArt
[175305.815829] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.3/3-4.3:1.0/0003:413C:301A.0008/input/input36
[175305.816139] hid-generic 0003:413C:301A.0008: input,hidraw2: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-4.3/input0
[175305.893799] usb 2-3.2: new SuperSpeed USB device number 10 using xhci_hcd
[175305.914104] usb 2-3.2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
[175305.914109] usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[175305.914110] usb 2-3.2: Product: USB 10/100/1000 LAN
[175305.914111] usb 2-3.2: Manufacturer: Realtek
[175305.914112] usb 2-3.2: SerialNumber: 001000001
[175305.994025] usb 2-3.2: reset SuperSpeed USB device number 10 using xhci_hcd
[175306.016483] r8152 2-3.2:1.0: firmware: failed to load rtl_nic/rtl8153b-2.fw (-2)
[175306.016487] r8152 2-3.2:1.0: Direct firmware load for rtl_nic/rtl8153b-2.fw failed with error -2
[175306.016488] r8152 2-3.2:1.0: unable to load firmware patch rtl_nic/rtl8153b-2.fw (-2)
[175306.016566] r8152 2-3.2:1.0 (unnamed net_device) (uninitialized): Using pass-thru MAC addr cc:48:3a:b7:7a:a9
[175306.050321] r8152 2-3.2:1.0 eth0: v1.12.12
[175306.077893] r8152 2-3.2:1.0 enxcc483ab77aa9: renamed from eth0
[175306.108147] wlp0s20f3: authenticate with 6c:f3:7f:10:93:48
[175306.108159] wlp0s20f3: bad VHT capabilities, disabling VHT
[175306.111730] wlp0s20f3: send auth to 6c:f3:7f:10:93:48 (try 1/3)
[175306.139487] wlp0s20f3: authenticated
[175306.139624] wlp0s20f3: VHT capa missing/short, disabling VHT/HE
[175306.141760] wlp0s20f3: associate with 6c:f3:7f:10:93:48 (try 1/3)
[175306.145541] wlp0s20f3: RX AssocResp from 6c:f3:7f:10:93:48 (capab=0x411 status=0 aid=7)
[175306.151167] wlp0s20f3: associated
[175306.525939] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
[175308.991311] IPv6: ADDRCONF(NETDEV_CHANGE): enxcc483ab77aa9: link becomes ready
[175308.991529] r8152 2-3.2:1.0 enxcc483ab77aa9: carrier on
[176065.381221] wlp0s20f3: deauthenticating from 6c:f3:7f:10:93:48 by local choice (Reason: 3=DEAUTH_LEAVING)
[176069.898979] wlp0s20f3: authenticate with 6c:f3:7f:10:93:48
[176069.898995] wlp0s20f3: bad VHT capabilities, disabling VHT
[176069.902493] wlp0s20f3: send auth to 6c:f3:7f:10:93:48 (try 1/3)
[176069.935570] wlp0s20f3: authenticated
[176069.935723] wlp0s20f3: VHT capa missing/short, disabling VHT/HE
[176069.936217] wlp0s20f3: associate with 6c:f3:7f:10:93:48 (try 1/3)
[176069.939976] wlp0s20f3: RX AssocResp from 6c:f3:7f:10:93:48 (capab=0x411 status=0 aid=6)
[176069.945785] wlp0s20f3: associated
[176070.376619] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
[179566.103422] wlp0s20f3: deauthenticating from 6c:f3:7f:10:93:48 by local choice (Reason: 3=DEAUTH_LEAVING)
[179566.226733] PM: suspend entry (s2idle)
[179566.230445] Filesystems sync: 0.003 seconds
[179566.230579] (NULL device *): firmware: direct-loading firmware i915/tgl_dmc_ver2_12.bin
[179566.230718] (NULL device *): firmware: direct-loading firmware regulatory.db
[179566.230731] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[179566.230822] (NULL device *): firmware: direct-loading firmware intel/sof-tplg/sof-hda-generic-2ch.tplg
[179566.230830] (NULL device *): firmware: direct-loading firmware intel/ibt-19-0-4.ddc
[179566.231059] (NULL device *): firmware: direct-loading firmware iwlwifi-QuZ-a0-hr-b0-63.ucode
[179566.231061] (NULL device *): firmware: direct-loading firmware intel/ibt-19-0-4.sfi
[179566.353302] Freezing user space processes ... (elapsed 0.003 seconds) done.
[179566.356887] OOM killer disabled.
[179566.356889] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[179566.357987] printk: Suspending console(s) (use no_console_suspend to debug)
[179566.851159] ACPI: EC: interrupt blocked
[186214.239616] ACPI: EC: interrupt unblocked
[186215.076637] OOM killer enabled.
[186215.076643] Restarting tasks ...
[186215.077046] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[186215.085266] done.
[186215.086061] r8152 2-3.2:1.0 enxcc483ab77aa9: carrier on
[186215.140352] PM: suspend exit
[186215.357651] r8152 2-3.2:1.0 enxcc483ab77aa9: carrier on
[186215.363644] IPv6: ADDRCONF(NETDEV_CHANGE): enxcc483ab77aa9: link becomes ready
[186219.388606] wlp0s20f3: authenticate with 6c:f3:7f:10:93:48
[186219.388619] wlp0s20f3: bad VHT capabilities, disabling VHT
[186219.393383] wlp0s20f3: send auth to 6c:f3:7f:10:93:48 (try 1/3)
[186219.420472] wlp0s20f3: authenticated
[186219.420693] wlp0s20f3: VHT capa missing/short, disabling VHT/HE
[186219.422897] wlp0s20f3: associate with 6c:f3:7f:10:93:48 (try 1/3)
[186219.426258] wlp0s20f3: RX AssocResp from 6c:f3:7f:10:93:48 (capab=0x411 status=0 aid=1)
[186219.432540] wlp0s20f3: associated
[186220.168830] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
[194584.160910] perf: interrupt took too long (3142 > 3132), lowering kernel.perf_event_max_sample_rate to 63500
[194617.097763] usb 3-4: USB disconnect, device number 11
[194617.097773] usb 3-4.1: USB disconnect, device number 12
[194617.100681] usb 3-4.3: USB disconnect, device number 13
[194617.135509] usb 2-3: USB disconnect, device number 9
[194617.135519] usb 2-3.2: USB disconnect, device number 10
[194620.161389] wlp0s20f3: deauthenticating from 6c:f3:7f:10:93:48 by local choice (Reason: 3=DEAUTH_LEAVING)
[194650.348969] PM: suspend entry (s2idle)
[194650.351314] Filesystems sync: 0.002 seconds
[194650.351397] (NULL device *): firmware: direct-loading firmware i915/tgl_dmc_ver2_12.bin
[194650.351496] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[194650.351498] (NULL device *): firmware: direct-loading firmware regulatory.db
[194650.351556] (NULL device *): firmware: direct-loading firmware intel/sof-tplg/sof-hda-generic-2ch.tplg
[194650.351576] (NULL device *): firmware: direct-loading firmware intel/ibt-19-0-4.ddc
[194650.351662] (NULL device *): firmware: direct-loading firmware iwlwifi-QuZ-a0-hr-b0-63.ucode
[194650.351691] (NULL device *): firmware: direct-loading firmware intel/ibt-19-0-4.sfi
[194650.619463] Freezing user space processes ... (elapsed 0.003 seconds) done.
[194650.622825] OOM killer disabled.
[194650.622827] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[194650.624205] printk: Suspending console(s) (use no_console_suspend to debug)
[194651.201042] ACPI: EC: interrupt blocked
[609838.462967] ACPI: EC: interrupt unblocked
[609839.269799] OOM killer enabled.
[609839.269802] Restarting tasks ...
[609839.270490] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[609839.272156] done.
[609839.331801] PM: suspend exit
[609842.581192] wlp0s20f3: authenticate with 2c:3a:fd:c0:b9:af
[609842.593643] wlp0s20f3: send auth to 2c:3a:fd:c0:b9:af (try 1/3)
[609842.667758] wlp0s20f3: authenticated
[609842.675937] wlp0s20f3: associate with 2c:3a:fd:c0:b9:af (try 1/3)
[609842.678954] wlp0s20f3: RX AssocResp from 2c:3a:fd:c0:b9:af (capab=0x1511 status=0 aid=2)
[609842.693560] wlp0s20f3: associated
[609842.713406] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 2c:3a:fd:c0:b9:af
[609842.760477] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
[609955.189075] wlp0s20f3: disconnect from AP 2c:3a:fd:c0:b9:af for new auth to c8:0e:14:f8:f4:26
[609955.244808] wlp0s20f3: authenticate with c8:0e:14:f8:f4:26
[609955.251692] wlp0s20f3: send auth to c8:0e:14:f8:f4:26 (try 1/3)
[609955.281344] wlp0s20f3: authenticated
[609955.287899] wlp0s20f3: associate with c8:0e:14:f8:f4:26 (try 1/3)
[609955.291467] wlp0s20f3: RX ReassocResp from c8:0e:14:f8:f4:26 (capab=0x1511 status=0 aid=8)
[609955.306091] wlp0s20f3: associated
[609955.367330] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by c8:0e:14:f8:f4:26
[609965.760253] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=1
[609968.983992] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: timed out for hid_descr_done
[609984.087967] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: Retry reset init
[609984.089301] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=1
[609987.160018] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: timed out for hid_descr_done
[609987.161046] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: Retry reset init
[609987.162224] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=1
[609990.232003] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: timed out for hid_descr_done
[609990.233100] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: Retry reset init
[609990.233108] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: Reset Failed
[609990.234490] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=1
[609993.304013] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: timed out for hid_descr_done
[610008.408034] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: Retry reset init
[610008.409320] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=1
[610011.480042] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: timed out for hid_descr_done
[610026.584052] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: Retry reset init
[610026.585140] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=1
[610029.655918] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: timed out for hid_descr_done
[610044.760094] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: Retry reset init
[610044.760105] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: Reset Failed
[611421.014096] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[611424.086395] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[611427.158148] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[611539.029788] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[611542.101998] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[611545.177779] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[611548.245899] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[611904.886818] wlp0s20f3: deauthenticating from c8:0e:14:f8:f4:26 by local choice (Reason: 3=DEAUTH_LEAVING)
[611912.353551] PM: suspend entry (s2idle)
[611912.372713] Filesystems sync: 0.019 seconds
[611912.372837] (NULL device *): firmware: direct-loading firmware i915/tgl_dmc_ver2_12.bin
[611912.372981] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[611912.372981] (NULL device *): firmware: direct-loading firmware regulatory.db
[611912.373031] (NULL device *): firmware: direct-loading firmware intel/sof-tplg/sof-hda-generic-2ch.tplg
[611912.373048] (NULL device *): firmware: direct-loading firmware intel/ibt-19-0-4.ddc
[611912.373193] (NULL device *): firmware: direct-loading firmware iwlwifi-QuZ-a0-hr-b0-63.ucode
[611912.373254] (NULL device *): firmware: direct-loading firmware intel/ibt-19-0-4.sfi
[611912.639942] Freezing user space processes ... (elapsed 0.003 seconds) done.
[611912.643590] OOM killer disabled.
[611912.643591] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[611912.644988] printk: Suspending console(s) (use no_console_suspend to debug)
[611915.861227] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[611918.933234] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[611922.005205] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[611922.582708] ACPI: EC: interrupt blocked
[689734.692446] ACPI: EC: interrupt unblocked
[689735.501105] OOM killer enabled.
[689735.501108] Restarting tasks ...
[689735.501460] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[689735.508187] done.
[689735.561516] PM: suspend exit
[689738.801045] wlp0s20f3: authenticate with 2c:3a:fd:c0:b9:af
[689738.810843] wlp0s20f3: send auth to 2c:3a:fd:c0:b9:af (try 1/3)
[689738.844906] wlp0s20f3: authenticated
[689738.849588] wlp0s20f3: associate with 2c:3a:fd:c0:b9:af (try 1/3)
[689738.852567] wlp0s20f3: RX AssocResp from 2c:3a:fd:c0:b9:af (capab=0x1511 status=0 aid=4)
[689738.863485] wlp0s20f3: associated
[689738.873000] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by 2c:3a:fd:c0:b9:af
[689738.930075] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
[689739.389385] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[689742.461343] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[689745.533442] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[689748.609347] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[689785.725339] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[689788.797304] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[689791.869319] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[689794.941363] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[689798.013360] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[689801.085223] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[689804.157677] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[689821.309543] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[689824.381682] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[689827.453739] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[689841.821607] usb 3-4: new full-speed USB device number 14 using xhci_hcd
[689842.041018] usb 3-4: New USB device found, idVendor=062a, idProduct=4c01, bcdDevice= 1.07
[689842.041029] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[689842.041033] usb 3-4: Product: 2.4G INPUT DEVICE
[689842.041036] usb 3-4: Manufacturer: MOSART Semi.
[689842.045100] input: MOSART Semi. 2.4G INPUT DEVICE as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:062A:4C01.0009/input/input43
[689842.102418] hid-generic 0003:062A:4C01.0009: input,hidraw1: USB HID v1.10 Keyboard [MOSART Semi. 2.4G INPUT DEVICE] on usb-0000:00:14.0-4/input0
[689842.105201] input: MOSART Semi. 2.4G INPUT DEVICE Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:062A:4C01.000A/input/input44
[689842.105871] input: MOSART Semi. 2.4G INPUT DEVICE Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:062A:4C01.000A/input/input45
[689842.165988] input: MOSART Semi. 2.4G INPUT DEVICE System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:062A:4C01.000A/input/input46
[689842.166465] input: MOSART Semi. 2.4G INPUT DEVICE as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:062A:4C01.000A/input/input47
[689842.167601] hid-generic 0003:062A:4C01.000A: input,hiddev0,hidraw2: USB HID v1.10 Mouse [MOSART Semi. 2.4G INPUT DEVICE] on usb-0000:00:14.0-4/input1
[689847.421643] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[689850.493655] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[689853.565446] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[689856.641486] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[690263.938391] wlp0s20f3: disconnect from AP 2c:3a:fd:c0:b9:af for new auth to c8:0e:14:f8:f4:26
[690263.998685] wlp0s20f3: authenticate with c8:0e:14:f8:f4:26
[690264.002152] wlp0s20f3: send auth to c8:0e:14:f8:f4:26 (try 1/3)
[690264.030202] wlp0s20f3: authenticated
[690264.037623] wlp0s20f3: associate with c8:0e:14:f8:f4:26 (try 1/3)
[690264.040088] wlp0s20f3: RX ReassocResp from c8:0e:14:f8:f4:26 (capab=0x1511 status=0 aid=1)
[690264.043472] wlp0s20f3: associated
[690264.101090] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by c8:0e:14:f8:f4:26
[691414.391857] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[691417.463997] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[691420.535856] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[691966.838063] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[691969.910095] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[691972.985902] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[691976.057941] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[692044.917867] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[692047.989819] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[692051.061975] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[692660.083617] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[692663.155603] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[692666.227613] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[692669.303585] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[693352.304949] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[693355.376801] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[693358.448958] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[693578.095866] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[693581.167820] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[693584.239700] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[693587.311769] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[693682.799381] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[694479.724682] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[694482.796553] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[694485.868648] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[695741.031782] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[695744.103613] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[695747.175766] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[695750.247595] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[696453.478547] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[696456.550821] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[696459.622550] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[696668.262150] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[696671.334312] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[696674.406154] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[696677.478114] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[696694.886263] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[696697.958062] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[696701.030235] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[696718.949924] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[696722.022165] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[696725.097913] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[696728.169868] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[697385.572144] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[697388.643968] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[697391.716118] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[697536.355660] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[697539.427494] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[697542.499478] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[697545.571617] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[701541.208179] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[701544.280196] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[701547.352161] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[701793.623129] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[701796.699231] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[701799.767217] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[701802.843187] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[702623.825389] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[702626.897473] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[702629.969452] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[702901.839774] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[702904.911803] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[702907.983609] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[702911.055740] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[702928.207631] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[702931.279647] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[702934.351594] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[703113.245331] wlp0s20f3: deauthenticating from c8:0e:14:f8:f4:26 by local choice (Reason: 3=DEAUTH_LEAVING)
[703113.498779] PM: suspend entry (s2idle)
[703113.502699] Filesystems sync: 0.003 seconds
[703113.502835] (NULL device *): firmware: direct-loading firmware i915/tgl_dmc_ver2_12.bin
[703113.503005] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[703113.503005] (NULL device *): firmware: direct-loading firmware regulatory.db
[703113.503541] (NULL device *): firmware: direct-loading firmware intel/sof-tplg/sof-hda-generic-2ch.tplg
[703113.503592] (NULL device *): firmware: direct-loading firmware intel/ibt-19-0-4.ddc
[703113.503780] (NULL device *): firmware: direct-loading firmware intel/ibt-19-0-4.sfi
[703113.504154] (NULL device *): firmware: direct-loading firmware iwlwifi-QuZ-a0-hr-b0-63.ucode
[703113.621436] Freezing user space processes ... (elapsed 0.003 seconds) done.
[703113.624700] OOM killer disabled.
[703113.624702] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[703113.626080] printk: Suspending console(s) (use no_console_suspend to debug)
[703114.203962] ACPI: EC: interrupt blocked
[781579.677692] ACPI: EC: interrupt unblocked
[781580.491106] OOM killer enabled.
[781580.491110] Restarting tasks ...
[781580.491406] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[781580.499290] done.
[781580.509570] usb 3-4: USB disconnect, device number 14
[781580.545867] PM: suspend exit
[781580.756895] rfkill: input handler enabled
[781581.005568] usb 3-4: new high-speed USB device number 15 using xhci_hcd
[781581.005781] usb 2-3: new SuperSpeed Plus Gen 2x1 USB device number 11 using xhci_hcd
[781581.028470] usb 2-3: New USB device found, idVendor=2109, idProduct=0820, bcdDevice=30.03
[781581.028475] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[781581.028476] usb 2-3: Product: USB3.1 Hub
[781581.028477] usb 2-3: Manufacturer: VIA Labs, Inc.
[781581.030852] hub 2-3:1.0: USB hub found
[781581.031138] hub 2-3:1.0: 4 ports detected
[781581.156277] usb 3-4: New USB device found, idVendor=2109, idProduct=2820, bcdDevice=30.03
[781581.156282] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[781581.156284] usb 3-4: Product: USB2.0 Hub
[781581.156285] usb 3-4: Manufacturer: VIA Labs, Inc.
[781581.157160] hub 3-4:1.0: USB hub found
[781581.157439] hub 3-4:1.0: 5 ports detected
[781581.585631] usb 2-3.2: new SuperSpeed USB device number 12 using xhci_hcd
[781581.610144] usb 2-3.2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
[781581.610149] usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[781581.610151] usb 2-3.2: Product: USB 10/100/1000 LAN
[781581.610152] usb 2-3.2: Manufacturer: Realtek
[781581.610153] usb 2-3.2: SerialNumber: 001000001
[781581.693801] usb 2-3.2: reset SuperSpeed USB device number 12 using xhci_hcd
[781581.716493] r8152 2-3.2:1.0: firmware: failed to load rtl_nic/rtl8153b-2.fw (-2)
[781581.716499] r8152 2-3.2:1.0: Direct firmware load for rtl_nic/rtl8153b-2.fw failed with error -2
[781581.716501] r8152 2-3.2:1.0: unable to load firmware patch rtl_nic/rtl8153b-2.fw (-2)
[781581.716575] r8152 2-3.2:1.0 (unnamed net_device) (uninitialized): Using pass-thru MAC addr cc:48:3a:b7:7a:a9
[781581.750123] r8152 2-3.2:1.0 eth0: v1.12.12
[781581.885571] usb 3-4.1: new full-speed USB device number 16 using xhci_hcd
[781581.947212] rfkill: input handler disabled
[781582.040201] usb 3-4.1: New USB device found, idVendor=06c4, idProduct=c412, bcdDevice= 0.06
[781582.040205] usb 3-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[781582.040206] usb 3-4.1: Product: DELL DA300
[781582.040207] usb 3-4.1: Manufacturer: Bizlink
[781582.040208] usb 3-4.1: SerialNumber: MCU Ver0006
[781582.050064] hid-generic 0003:06C4:C412.000B: hiddev0,hidraw1: USB HID v1.11 Device [Bizlink DELL DA300] on usb-0000:00:14.0-4.1/input0
[781582.177685] usb 3-4.3: new low-speed USB device number 17 using xhci_hcd
[781582.330806] usb 3-4.3: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00
[781582.330813] usb 3-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[781582.330814] usb 3-4.3: Product: Dell MS116 USB Optical Mouse
[781582.330815] usb 3-4.3: Manufacturer: PixArt
[781582.336209] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.3/3-4.3:1.0/0003:413C:301A.000C/input/input50
[781582.336315] hid-generic 0003:413C:301A.000C: input,hidraw2: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-4.3/input0
[781582.343126] r8152 2-3.2:1.0 enxcc483ab77aa9: renamed from eth0
[781584.614140] wlp0s20f3: authenticate with 6c:f3:7f:10:93:48
[781584.614159] wlp0s20f3: bad VHT capabilities, disabling VHT
[781584.618914] wlp0s20f3: send auth to 6c:f3:7f:10:93:48 (try 1/3)
[781584.648124] wlp0s20f3: authenticated
[781584.648486] wlp0s20f3: VHT capa missing/short, disabling VHT/HE
[781584.653653] wlp0s20f3: associate with 6c:f3:7f:10:93:48 (try 1/3)
[781584.658237] wlp0s20f3: RX AssocResp from 6c:f3:7f:10:93:48 (capab=0x411 status=0 aid=5)
[781584.664412] wlp0s20f3: associated
[781585.070328] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
[781585.245797] IPv6: ADDRCONF(NETDEV_CHANGE): enxcc483ab77aa9: link becomes ready
[781585.246066] r8152 2-3.2:1.0 enxcc483ab77aa9: carrier on
[781587.353535] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[781590.421517] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[781593.493506] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[781596.565584] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[781723.773196] rfkill: input handler enabled
[781723.773268] rfkill: input handler disabled
[781830.180661] wlp0s20f3: deauthenticating from 6c:f3:7f:10:93:48 by local choice (Reason: 3=DEAUTH_LEAVING)
[781834.322575] wlp0s20f3: authenticate with 6c:f3:7f:10:93:48
[781834.322587] wlp0s20f3: bad VHT capabilities, disabling VHT
[781834.326855] wlp0s20f3: send auth to 6c:f3:7f:10:93:48 (try 1/3)
[781834.353524] wlp0s20f3: authenticated
[781834.353665] wlp0s20f3: VHT capa missing/short, disabling VHT/HE
[781834.356298] wlp0s20f3: associate with 6c:f3:7f:10:93:48 (try 1/3)
[781834.359683] wlp0s20f3: RX AssocResp from 6c:f3:7f:10:93:48 (capab=0x411 status=0 aid=5)
[781834.365047] wlp0s20f3: associated
[781834.904601] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
[783099.022643] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[783102.094493] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[783105.166350] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[785763.974812] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[785767.046934] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[785770.118793] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[785773.194788] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[785786.106861] perf: interrupt took too long (4022 > 3927), lowering kernel.perf_event_max_sample_rate to 49500
[787326.595525] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[787329.667516] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device
[787332.739453] hid-sensor-hub 001F:8087:0AC2.0002: timeout waiting for response from ISHTP device