[PATCH 4.9 08/25] mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD

[Greg Kroah-Hartman]

From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>

commit ad91619aa9d78ab1c6d4a969c3db68bc331ae76c upstream

The INAND_CMD38_ARG_EXT_CSD is a vendor specific EXT_CSD register, which is
used to prepare an erase/trim operation. However, it doesn't make sense to
use a timeout of 10 minutes while updating the register, which becomes the
case when the timeout_ms argument for mmc_switch() is set to zero.

Instead, let's use the generic_cmd6_time, as that seems like a reasonable
timeout to use for these cases.

Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20200122142747.5690-3-ulf.hansson@xxxxxxxxxx
Signed-off-by: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/mmc/card/block.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1192,7 +1192,7 @@ retry:
 				 arg == MMC_TRIM_ARG ?
 				 INAND_CMD38_ARG_TRIM :
 				 INAND_CMD38_ARG_ERASE,
-				 0);
+				 card->ext_csd.generic_cmd6_time);
 		if (err)
 			goto out;
 	}
@@ -1235,7 +1235,7 @@ retry:
 				 arg == MMC_SECURE_TRIM1_ARG ?
 				 INAND_CMD38_ARG_SECTRIM1 :
 				 INAND_CMD38_ARG_SECERASE,
-				 0);
+				 card->ext_csd.generic_cmd6_time);
 		if (err)
 			goto out_retry;
 	}
@@ -1251,7 +1251,7 @@ retry:
 			err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 					 INAND_CMD38_ARG_EXT_CSD,
 					 INAND_CMD38_ARG_SECTRIM2,
-					 0);
+					 card->ext_csd.generic_cmd6_time);
 			if (err)
 				goto out_retry;
 		}