[PATCH v3] PCI/ASPM: Update LTR threshold based upon reported max latencies
From: Krishna chaitanya chundru
Date: Wed Jun 01 2022 - 08:24:45 EST
In ASPM driver, LTR threshold scale and value is updating based on
tcommon_mode and t_poweron values. In kioxia NVMe L1.2 is failing due to
LTR threshold scale and value is greater values than max snoop/non-snoop
value.
Based on PCIe r4.1, sec 5.5.1, L1.2 substate must be entered when
reported snoop/no-snoop values is greather than or equal to
LTR_L1.2_THRESHOLD value.
Suggested-by: Prasad Malisetty <quic_pmaliset@xxxxxxxxxxx>
Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
---
I am takking this patch forward as prasad is no more working with our org.
Changes since v2:
- Replaced LTRME logic with max snoop/no-snoop latencies check.
Changes since v1:
- Added missing variable declaration in v1 patch
---
drivers/pci/pcie/aspm.c | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index a96b742..4a15e50 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -465,10 +465,19 @@ static void aspm_calc_l1ss_info(struct pcie_link_state *link,
u32 ctl1 = 0, ctl2 = 0;
u32 pctl1, pctl2, cctl1, cctl2;
u32 pl1_2_enables, cl1_2_enables;
+ int ltr;
+ u16 max_snoop_lat = 0, max_nosnoop_lat = 0;
if (!(link->aspm_support & ASPM_STATE_L1_2_MASK))
return;
+ ltr = pci_find_ext_capability(child, PCI_EXT_CAP_ID_LTR);
+ if (!ltr)
+ return;
+
+ pci_read_config_word(child, ltr + PCI_LTR_MAX_SNOOP_LAT, &max_snoop_lat);
+ pci_read_config_word(child, ltr + PCI_LTR_MAX_NOSNOOP_LAT, &max_nosnoop_lat);
+
/* Choose the greater of the two Port Common_Mode_Restore_Times */
val1 = (parent_l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8;
val2 = (child_l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8;
@@ -501,7 +510,18 @@ static void aspm_calc_l1ss_info(struct pcie_link_state *link,
*/
l1_2_threshold = 2 + 4 + t_common_mode + t_power_on;
encode_l12_threshold(l1_2_threshold, &scale, &value);
- ctl1 |= t_common_mode << 8 | scale << 29 | value << 16;
+
+ /*
+ * If the max snoop and no snoop latencies are '0', then avoid updating scale
+ * and value.
+ *
+ * Based on PCIe r4.1, sec 5.5.1, L1.2 substate must be entered when reported
+ * snoop/no-snoop values is greather than or equal to LTR_L1.2_THRESHOLD value.
+ */
+ if ((max_snoop_lat == 0) && (max_nosnoop_lat == 0))
+ ctl1 |= t_common_mode << 8;
+ else
+ ctl1 |= t_common_mode << 8 | scale << 29 | value << 16;
/* Some broken devices only support dword access to L1 SS */
pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, &pctl1);
--
2.7.4