[PATCH] net: stmmac: use dev_err_probe() for reporting mdio bus registration failure

[Rasmus Villemoes]

I have a board where these two lines are always printed during boot:

   imx-dwmac 30bf0000.ethernet: Cannot register the MDIO bus
   imx-dwmac 30bf0000.ethernet: stmmac_dvr_probe: MDIO bus (id: 1) registration failed

It's perfectly fine, and the device is succesfully (and silently, as far
as the console goes) probed later.

Use dev_err_probe() instead, which will demote these messages to debug
level (thus removing the alarming messages from the console) when the
error is -EPROBE_DEFER, and also has the advantage of including the
error code if/when it happens to be something other than -EPROBE_DEFER.

Signed-off-by: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3b81d4e9dc83..8a739746c951 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7129,7 +7129,7 @@ int stmmac_dvr_probe(struct device *device,
 		/* MDIO bus Registration */
 		ret = stmmac_mdio_register(ndev);
 		if (ret < 0) {
-			dev_err(priv->device,
+			dev_err_probe(priv->device, ret,
 				"%s: MDIO bus (id: %d) registration failed",
 				__func__, priv->plat->bus_id);
 			goto error_mdio_register;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 9bc625fccca0..03d3d1f7aa4b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -482,7 +482,7 @@ int stmmac_mdio_register(struct net_device *ndev)
 
 	err = of_mdiobus_register(new_bus, mdio_node);
 	if (err != 0) {
-		dev_err(dev, "Cannot register the MDIO bus\n");
+		dev_err_probe(dev, err, "Cannot register the MDIO bus\n");
 		goto bus_register_fail;
 	}
 
-- 
2.31.1