[PATCH v7 4/6] firmware: xilinx: Add shutdown/wakeup APIs
From: Tanmay Shah
Date: Wed Jun 01 2022 - 12:22:13 EST
From: Ben Levinsky <ben.levinsky@xxxxxxxxxx>
Add shutdown/wakeup a resource eemi operations to shutdown
or bringup a resource.
Note alignment of args matches convention of other fn's in this file.
The reason being that the long fn name results in aligned args that
otherwise go over 80 chars so shift right to avoid this
Signed-off-by: Ben Levinsky <ben.levinsky@xxxxxxxxxx>
Signed-off-by: Tanmay Shah <tanmay.shah@xxxxxxxxxx>
---
Changes in v7:
- None
Changes in v6:
- None
Changes in v5:
- None
Changes in v4:
- None
Changes in v3:
- None
drivers/firmware/xilinx/zynqmp.c | 35 ++++++++++++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 23 ++++++++++++++++++
2 files changed, 58 insertions(+)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index f21ece56695e..fabdbac868f5 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -1067,6 +1067,41 @@ int zynqmp_pm_release_node(const u32 node)
}
EXPORT_SYMBOL_GPL(zynqmp_pm_release_node);
+/**
+ * zynqmp_pm_force_pwrdwn - PM call to request for another PU or subsystem to
+ * be powered down forcefully
+ * @node: Node ID of the targeted PU or subsystem
+ * @ack: Flag to specify whether acknowledge is requested
+ *
+ * Return: status, either success or error+reason
+ */
+int zynqmp_pm_force_pwrdwn(const u32 node,
+ const enum zynqmp_pm_request_ack ack)
+{
+ return zynqmp_pm_invoke_fn(PM_FORCE_POWERDOWN, node, ack, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_force_pwrdwn);
+
+/**
+ * zynqmp_pm_request_wake - PM call to wake up selected master or subsystem
+ * @node: Node ID of the master or subsystem
+ * @set_addr: Specifies whether the address argument is relevant
+ * @address: Address from which to resume when woken up
+ * @ack: Flag to specify whether acknowledge requested
+ *
+ * Return: status, either success or error+reason
+ */
+int zynqmp_pm_request_wake(const u32 node,
+ const bool set_addr,
+ const u64 address,
+ const enum zynqmp_pm_request_ack ack)
+{
+ /* set_addr flag is encoded into 1st bit of address */
+ return zynqmp_pm_invoke_fn(PM_REQUEST_WAKEUP, node, address | set_addr,
+ address >> 32, ack, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_request_wake);
+
/**
* zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves
* @node: Node ID of the slave
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 54331b726ab0..bce3465a70a4 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -12,6 +12,7 @@
#ifndef __FIRMWARE_ZYNQMP_H__
#define __FIRMWARE_ZYNQMP_H__
+#include <linux/types.h>
#include <linux/err.h>
@@ -81,6 +82,8 @@ enum pm_api_cb_id {
enum pm_api_id {
PM_GET_API_VERSION = 1,
PM_REGISTER_NOTIFIER = 5,
+ PM_FORCE_POWERDOWN = 8,
+ PM_REQUEST_WAKEUP = 10,
PM_SYSTEM_SHUTDOWN = 12,
PM_REQUEST_NODE = 13,
PM_RELEASE_NODE = 14,
@@ -481,6 +484,12 @@ int zynqmp_pm_register_notifier(const u32 node, const u32 event,
int zynqmp_pm_feature(const u32 api_id);
int zynqmp_pm_set_feature_config(enum pm_feature_config_id id, u32 value);
int zynqmp_pm_get_feature_config(enum pm_feature_config_id id, u32 *payload);
+int zynqmp_pm_force_pwrdwn(const u32 target,
+ const enum zynqmp_pm_request_ack ack);
+int zynqmp_pm_request_wake(const u32 node,
+ const bool set_addr,
+ const u64 address,
+ const enum zynqmp_pm_request_ack ack);
#else
static inline int zynqmp_pm_get_api_version(u32 *version)
{
@@ -741,6 +750,20 @@ static inline int zynqmp_pm_get_feature_config(enum pm_feature_config_id id,
{
return -ENODEV;
}
+
+static inline int zynqmp_pm_force_pwrdwn(const u32 target,
+ const enum zynqmp_pm_request_ack ack)
+{
+ return -ENODEV;
+}
+
+static inline int zynqmp_pm_request_wake(const u32 node,
+ const bool set_addr,
+ const u64 address,
+ const enum zynqmp_pm_request_ack ack)
+{
+ return -ENODEV;
+}
#endif
#endif /* __FIRMWARE_ZYNQMP_H__ */
--
2.25.1