Re: [PATCH v2] drm/msm/dpu: Move min BW request and full BW disable back to mdss

From: Abhinav Kumar
Date: Wed Jun 01 2022 - 13:18:23 EST




On 6/1/2022 3:04 AM, Dmitry Baryshkov wrote:
On Wed, 1 Jun 2022 at 02:01, Douglas Anderson <dianders@xxxxxxxxxxxx> wrote:

In commit a670ff578f1f ("drm/msm/dpu: always use mdp device to scale
bandwidth") we fully moved interconnect stuff to the DPU driver. This
had no change for sc7180 but _did_ have an impact for other SoCs. It
made them match the sc7180 scheme.

[skipped the description]


Changes in v2:
- Don't set bandwidth in init.

drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 8 ----
drivers/gpu/drm/msm/msm_mdss.c | 57 +++++++++++++++++++++++++
2 files changed, 57 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 2b9d931474e0..3025184053e0 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -49,8 +49,6 @@
#define DPU_DEBUGFS_DIR "msm_dpu"
#define DPU_DEBUGFS_HWMASKNAME "hw_log_mask"

-#define MIN_IB_BW 400000000ULL /* Min ib vote 400MB */
-
static int dpu_kms_hw_init(struct msm_kms *kms);
static void _dpu_kms_mmu_destroy(struct dpu_kms *dpu_kms);


[skipped]

diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
index 0454a571adf7..e13c5c12b775 100644
--- a/drivers/gpu/drm/msm/msm_mdss.c
+++ b/drivers/gpu/drm/msm/msm_mdss.c
@@ -5,6 +5,7 @@

#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/interconnect.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/irqdesc.h>
@@ -25,6 +26,8 @@
#define UBWC_CTRL_2 0x150
#define UBWC_PREDICTION_MODE 0x154

+#define MIN_IB_BW 400000000UL /* Min ib vote 400MB */

As msm_mdss is now used for both DPU and MDP5 devices, could you
please confirm that this value is valid for older devices too? E.g.
db410c or 8974

I need to check with Kalyan on this value (400MB) as I am unable to find documentation on this. Will update this thread when I do.

So prior to this change 627dc55c273da ("drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume"), this value was coming from the hw catalog

@@ -1191,10 +1193,10 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev)

ddev = dpu_kms->dev;

+ WARN_ON(!(dpu_kms->num_paths));
/* Min vote of BW is required before turning on AXI clk */
for (i = 0; i < dpu_kms->num_paths; i++)
- icc_set_bw(dpu_kms->path[i], 0,
- dpu_kms->catalog->perf.min_dram_ib);
+ icc_set_bw(dpu_kms->path[i], 0, Bps_to_icc(MIN_IB_BW));

After this, we moved to a hard-coded value, I am not sure why.

So nothing wrong with this change as such, the only question is whether this value is correct for older chips.

But the question here is, are older chips even using icc.

It seems like only sc7180, RB3/RB5 are unless i am mistaken.

So is there really any impact to the older chips with this change.

If not, we should probably let this one go ahead and move back to catalog based approach while extending ICC for older chips.

Thanks

Abhinav

+
struct msm_mdss {
struct device *dev;