On Wed, May 4, 2022 at 7:55 PM Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx> wrote:
This series is for supporting devapc implementation in MT8186.
V2:
- Add a patch to separate register offsets from mtk_devapc_data.
V1:
- Add dt-binding and add devapc data for MT8186.
Rex-BC Chen (3):
dt-bindings: soc: mediatek: devapc: Add bindings for MT8186
soc: mediatek: devapc: Separate register offsets from mtk_devapc_data
soc: mediatek: devapc: Add support for MT8186
Applied this on next-20220602 (with a few fixes for other section mismatch
errors), booted and got:
[ 1.948483] mtk-devapc 10207000.devapc: Read Violation
[ 1.948488] mtk-devapc 10207000.devapc: Bus ID:0x100, Dom ID:0x0,
Vio Addr:0x13000000
[ 1.948520] mtk-devapc 10207000.devapc: Read Violation
[ 1.948523] mtk-devapc 10207000.devapc: Bus ID:0x200, Dom ID:0x0,
Vio Addr:0x140001a0
[ 1.948537] mtk-devapc 10207000.devapc: Read Violation
[ 1.948540] mtk-devapc 10207000.devapc: Bus ID:0x200, Dom ID:0x0,
Vio Addr:0x140001a0
[ 1.948555] mtk-devapc 10207000.devapc: Read Violation
[ 1.948558] mtk-devapc 10207000.devapc: Bus ID:0x200, Dom ID:0x0,
Vio Addr:0x14000100
[ 1.948573] mtk-devapc 10207000.devapc: Read Violation
[ 1.948576] mtk-devapc 10207000.devapc: Bus ID:0x200, Dom ID:0x0,
Vio Addr:0x14000100
[ 1.948590] mtk-devapc 10207000.devapc: Read Violation
[ 1.948593] mtk-devapc 10207000.devapc: Bus ID:0x200, Dom ID:0x0,
Vio Addr:0x14000100
[ 1.948607] mtk-devapc 10207000.devapc: Read Violation
[ 1.948610] mtk-devapc 10207000.devapc: Bus ID:0x200, Dom ID:0x0,
Vio Addr:0x14000100
[ 1.948624] mtk-devapc 10207000.devapc: Read Violation
[ 1.948627] mtk-devapc 10207000.devapc: Bus ID:0x200, Dom ID:0x0,
Vio Addr:0x14000100
during the boot process. So I think this works well. Manually reading a
known secure address also triggers it:
root@hayato:~# busybox devmem 0x1000e000
0x00000000
[ 135.069121] mtk-devapc 10207000.devapc: Read Violation
[ 135.069132] mtk-devapc 10207000.devapc: Bus ID:0x482, Dom ID:0x0,
Vio Addr:0x1000e000
So,
Tested-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
BTW, looks like MT8186 support in mainline is shaping up real good.
SCP firmware is still missing, so video codec stuff won't work.