Re: [PATCH v3 2/4] drm/panel-edp: Take advantage of wait_hpd_asserted() in struct drm_dp_aux

[Dmitry Baryshkov]

On 18/04/2022 20:17, Douglas Anderson wrote:
> Let's add support for being able to read the HPD pin even if it's
> hooked directly to the controller. This will allow us to get more
> accurate delays also lets us take away the waiting in the AUX transfer
> functions of the eDP controller drivers.
>
> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

> ---
>
> (no changes since v2)
>
> Changes in v2:
> - Change is_hpd_asserted() to wait_hpd_asserted()
>
>   drivers/gpu/drm/panel/panel-edp.c | 33 +++++++++++++++++++++----------
>   1 file changed, 23 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
> index 1732b4f56e38..086e0bf52fb9 100644
> --- a/drivers/gpu/drm/panel/panel-edp.c
> +++ b/drivers/gpu/drm/panel/panel-edp.c
> @@ -417,6 +417,11 @@ static int panel_edp_get_hpd_gpio(struct device *dev, struct panel_edp *p)
>   	return 0;
>   }
>   
> +static bool panel_edp_can_read_hpd(struct panel_edp *p)
> +{
> +	return !p->no_hpd && (p->hpd_gpio || (p->aux && p->aux->wait_hpd_asserted));
> +}
> +
>   static int panel_edp_prepare_once(struct panel_edp *p)
>   {
>   	struct device *dev = p->base.dev;
> @@ -441,17 +446,21 @@ static int panel_edp_prepare_once(struct panel_edp *p)
>   	if (delay)
>   		msleep(delay);
>   
> -	if (p->hpd_gpio) {
> +	if (panel_edp_can_read_hpd(p)) {
>   		if (p->desc->delay.hpd_absent)
>   			hpd_wait_us = p->desc->delay.hpd_absent * 1000UL;
>   		else
>   			hpd_wait_us = 2000000;
>   
> -		err = readx_poll_timeout(gpiod_get_value_cansleep, p->hpd_gpio,
> -					 hpd_asserted, hpd_asserted,
> -					 1000, hpd_wait_us);
> -		if (hpd_asserted < 0)
> -			err = hpd_asserted;
> +		if (p->hpd_gpio) {
> +			err = readx_poll_timeout(gpiod_get_value_cansleep,
> +						 p->hpd_gpio, hpd_asserted,
> +						 hpd_asserted, 1000, hpd_wait_us);
> +			if (hpd_asserted < 0)
> +				err = hpd_asserted;
> +		} else {
> +			err = p->aux->wait_hpd_asserted(p->aux, hpd_wait_us);
> +		}

I'm close to thinking that this construct deserves a separate helper.

>   
>   		if (err) {
>   			if (err != -ETIMEDOUT)
> @@ -532,18 +541,22 @@ static int panel_edp_enable(struct drm_panel *panel)
>   	/*
>   	 * If there is a "prepare_to_enable" delay then that's supposed to be
>   	 * the delay from HPD going high until we can turn the backlight on.
> -	 * However, we can only count this if HPD is handled by the panel
> -	 * driver, not if it goes to a dedicated pin on the controller.
> +	 * However, we can only count this if HPD is readable by the panel
> +	 * driver.
> +	 *
>   	 * If we aren't handling the HPD pin ourselves then the best we
>   	 * can do is assume that HPD went high immediately before we were
> -	 * called (and link training took zero time).
> +	 * called (and link training took zero time). Note that "no-hpd"
> +	 * actually counts as handling HPD ourselves since we're doing the
> +	 * worst case delay (in prepare) ourselves.
>   	 *
>   	 * NOTE: if we ever end up in this "if" statement then we're
>   	 * guaranteed that the panel_edp_wait() call below will do no delay.
>   	 * It already handles that case, though, so we don't need any special
>   	 * code for it.
>   	 */
> -	if (p->desc->delay.prepare_to_enable && !p->hpd_gpio && !p->no_hpd)
> +	if (p->desc->delay.prepare_to_enable &&
> +	    !panel_edp_can_read_hpd(p) && !p->no_hpd)
>   		delay = max(delay, p->desc->delay.prepare_to_enable);
>   
>   	if (delay)


--
With best wishes
Dmitry