[PATCH v4 2/2] arm64: dts: qcom: msm8996-xiaomi-natrium: Add support for Xiaomi Mi 5s Plus

From: Alec Su
Date: Sun Jun 05 2022 - 22:47:37 EST

Next message: Damien Le Moal: "Re: [RESEND PATCH] scsi: ufs: sysfs: support writing boot_lun attr"
Previous message: Alec Su: "[PATCH v4 1/2] dt-bindings: arm: qcom: Document xiaomi,natrium board"
In reply to: Alec Su: "[PATCH v4 1/2] dt-bindings: arm: qcom: Document xiaomi,natrium board"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Add the device tree for Xiaomi Mi 5s Plus (natrium).

Signed-off-by: Alec Su <ae40515@xxxxxxxxxxxx>
Reviewed-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/msm8996-xiaomi-natrium.dts | 414 ++++++++++++++++++
2 files changed, 415 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 2f8aec2cc6db..3ae7ecd369fb 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -37,6 +37,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-gemini.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-natrium.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-scorpio.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-fxtec-pro1.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts
new file mode 100644
index 000000000000..ff4673ee9e81
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts
@@ -0,0 +1,414 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Alec Su <ae40515@xxxxxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include "msm8996-xiaomi-common.dtsi"
+#include "pmi8996.dtsi"
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+/ {
+ model = "Xiaomi Mi 5s Plus";
+ compatible = "xiaomi,natrium", "qcom,msm8996";
+ chassis-type = "handset";
+ qcom,msm-id = <305 0x10000>;
+ qcom,board-id = <47 0>;
+};
+
+&adsp_pil {
+ firmware-name = "qcom/msm8996/natrium/adsp.mbn";
+};
+
+&blsp2_i2c6 {
+ touchscreen@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vdd_3v2_tp>;
+ syna,reset-delay-ms = <200>;
+ syna,startup-delay-ms = <5>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&touchscreen_default>;
+ pinctrl-1 = <&touchscreen_sleep>;
+ };
+};
+
+&dsi0 {
+ status = "okay";
+
+ vdda-supply = <&vreg_l2a_1p25>;
+ vcca-supply = <&vreg_l28a_0p925>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mdss_dsi_default &mdss_te_default>;
+ pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
+
+ panel: panel@0 {
+ compatible = "jdi,fhd-r63452";
+ reg = <0>;
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ backlight = <&pmi8994_wled>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+};
+
+&dsi0_out {
+ remote-endpoint = <&panel_in>;
+};
+
+&gpu {
+ zap-shader {
+ firmware-name = "qcom/msm8996/natrium/a530_zap.mbn";
+ };
+};
+
+&mss_pil {
+ firmware-name = "qcom/msm8996/natrium/mba.mbn",
+ "qcom/msm8996/natrium/modem.mbn";
+};
+
+&pmi8994_wled {
+ status = "okay";
+
+ qcom,enabled-strings = <0 1>;
+ qcom,switching-freq = <600>;
+};
+
+&q6asmdai {
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+};
+
+&slpi_pil {
+ firmware-name = "qcom/msm8996/natrium/slpi.mbn";
+};
+
+&sound {
+ compatible = "qcom,apq8096-sndcard";
+ model = "natrium";
+ audio-routing = "RX_BIAS", "MCLK";
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ mm2-dai-link {
+ link-name = "MultiMedia2";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
+ };
+
+ mm3-dai-link {
+ link-name = "MultiMedia3";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
+ slim-dai-link {
+ link-name = "SLIM Playback";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_6_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9335 6>;
+ };
+ };
+
+ slimcap-dai-link {
+ link-name = "SLIM Capture";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9335 1>;
+ };
+ };
+};
+
+&venus {
+ firmware-name = "qcom/msm8996/natrium/venus.mbn";
+};
+
+&rpm_requests {
+ pm8994-regulators {
+ vreg_l3a_0p875: l3 {
+ regulator-name = "vreg_l3a_0p875";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ };
+ vreg_l11a_1p1: l11 {
+ regulator-name = "vreg_l11a_1p1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+ vreg_l17a_2p8: l17 {
+ regulator-name = "vreg_l17a_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ vreg_l18a_2p8: l18 {
+ regulator-name = "vreg_l18a_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ vreg_l29a_2p8: l29 {
+ regulator-name = "vreg_l29a_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ };
+};
+
+&pm8994_gpios {
+ gpio-line-names =
+ "NC", /* GPIO_1 */
+ "VOL_UP_N", /* GPIO_2 */
+ "SPKR_ID", /* GPIO_3 */
+ "PWM_HAPTICS", /* GPIO_4 */
+ "INFARED_DRV", /* GPIO_5 */
+ "NC", /* GPIO_6 */
+ "KEYPAD_LED_EN_A", /* GPIO_7 */
+ "WL_EN", /* GPIO_8 */
+ "3P3_ENABLE", /* GPIO_9 */
+ "NC", /* GPIO_10 */
+ "NC", /* GPIO_11 */
+ "NC", /* GPIO_12 */
+ "NC", /* GPIO_13 */
+ "NC", /* GPIO_14 */
+ "DIVCLK1_CDC", /* GPIO_15 */
+ "DIVCLK2_HAPTICS", /* GPIO_16 */
+ "NC", /* GPIO_17 */
+ "32KHz_CLK_IN", /* GPIO_18 */
+ "BT_EN", /* GPIO_19 */
+ "PMIC_SLB", /* GPIO_20 */
+ "UIM_BATT_ALARM", /* GPIO_21 */
+ "NC"; /* GPIO_22 */
+};
+
+&pm8994_mpps {
+ gpio-line-names =
+ "NC", /* MPP_1 */
+ "CCI_TIMER1", /* MPP_2 */
+ "PMIC_SLB", /* MPP_3 */
+ "EXT_FET_WLED_PWR_EN_N",/* MPP_4 */
+ "NC", /* MPP_5 */
+ "NC", /* MPP_6 */
+ "NC", /* MPP_7 */
+ "NC"; /* MPP_8 */
+};
+
+&pmi8994_gpios {
+ gpio-line-names =
+ "NC", /* GPIO_1 */
+ "SPKR_PA_EN", /* GPIO_2 */
+ "NC", /* GPIO_3 */
+ "NC", /* GPIO_4 */
+ "NC", /* GPIO_5 */
+ "NC", /* GPIO_6 */
+ "NC", /* GPIO_7 */
+ "NC", /* GPIO_8 */
+ "NC", /* GPIO_9 */
+ "NC"; /* GPIO_10 */
+};
+
+&tlmm {
+ gpio-line-names =
+ "ESE_SPI_MOSI", /* GPIO_0 */
+ "ESE_SPI_MISO", /* GPIO_1 */
+ "NC", /* GPIO_2 */
+ "ESE_SPI_CLK", /* GPIO_3 */
+ "MSM_UART_TX", /* GPIO_4 */
+ "MSM_UART_RX", /* GPIO_5 */
+ "NFC_I2C_SDA", /* GPIO_6 */
+ "NFC_I2C_SCL", /* GPIO_7 */
+ "LCD0_RESET_N", /* GPIO_8 */
+ "NFC_IRQ", /* GPIO_9 */
+ "LCD_TE", /* GPIO_10 */
+ "LCD_ID_DET1", /* GPIO_11 */
+ "NFC_DISABLE", /* GPIO_12 */
+ "CAM_MCLK0", /* GPIO_13 */
+ "CAM_MCLK1", /* GPIO_14 */
+ "CAM_MCLK2", /* GPIO_15 */
+ "ESE_PWR_REQ", /* GPIO_16 */
+ "CCI_I2C_SDA0", /* GPIO_17 */
+ "CCI_I2C_SCL0", /* GPIO_18 */
+ "CCI_I2C_SDA1", /* GPIO_19 */
+ "CCI_I2C_SCL1", /* GPIO_20 */
+ "NFC_DWL_REQ", /* GPIO_21 */
+ "CCI_TIMER1", /* GPIO_22 */
+ "WEBCAM1_RESET_N", /* GPIO_23 */
+ "ESE_IRQ", /* GPIO_24 */
+ "NC", /* GPIO_25 */
+ "WEBCAM1_STANDBY", /* GPIO_26 */
+ "NC", /* GPIO_27 */
+ "NC", /* GPIO_28 */
+ "NC", /* GPIO_29 */
+ "CAM_VDD_1P2_EN_2", /* GPIO_30 */
+ "CAM_RESET_0", /* GPIO_31 */
+ "CAM_RESET_1", /* GPIO_32 */
+ "NC", /* GPIO_33 */
+ "NC", /* GPIO_34 */
+ "PCI_E0_RST_N", /* GPIO_35 */
+ "PCI_E0_CLKREQ_N", /* GPIO_36 */
+ "PCI_E0_WAKE", /* GPIO_37 */
+ "CHARGER_INT", /* GPIO_38 */
+ "CHARGER_RESET", /* GPIO_39 */
+ "NC", /* GPIO_40 */
+ "QCA_UART_TXD", /* GPIO_41 */
+ "QCA_UART_RXD", /* GPIO_42 */
+ "QCA_UART_CTS", /* GPIO_43 */
+ "QCA_UART_RTS", /* GPIO_44 */
+ "MAWC_UART_TX", /* GPIO_45 */
+ "MAWC_UART_RX", /* GPIO_46 */
+ "NC", /* GPIO_47 */
+ "NC", /* GPIO_48 */
+ "NC", /* GPIO_49 */
+ "FP_SPI_RST", /* GPIO_50 */
+ "TYPEC_I2C_SDA", /* GPIO_51 */
+ "TYPEC_I2C_SCL", /* GPIO_52 */
+ "CODEC_INT2_N", /* GPIO_53 */
+ "CODEC_INT1_N", /* GPIO_54 */
+ "APPS_I2C7_SDA", /* GPIO_55 */
+ "APPS_I2C7_SCL", /* GPIO_56 */
+ "FORCE_USB_BOOT", /* GPIO_57 */
+ "NC", /* GPIO_58 */
+ "NC", /* GPIO_59 */
+ "NC", /* GPIO_60 */
+ "NC", /* GPIO_61 */
+ "ESE_RSTN", /* GPIO_62 */
+ "TYPEC_INT", /* GPIO_63 */
+ "CODEC_RESET_N", /* GPIO_64 */
+ "PCM_CLK", /* GPIO_65 */
+ "PCM_SYNC", /* GPIO_66 */
+ "PCM_DIN", /* GPIO_67 */
+ "PCM_DOUT", /* GPIO_68 */
+ "CDC_44K1_CLK", /* GPIO_69 */
+ "SLIMBUS_CLK", /* GPIO_70 */
+ "SLIMBUS_DATA0", /* GPIO_71 */
+ "SLIMBUS_DATA1", /* GPIO_72 */
+ "LDO_5V_IN_EN", /* GPIO_73 */
+ "TYPEC_EN_N", /* GPIO_74 */
+ "NC", /* GPIO_75 */
+ "NC", /* GPIO_76 */
+ "NC", /* GPIO_77 */
+ "NC", /* GPIO_78 */
+ "NC", /* GPIO_79 */
+ "SENSOR_RESET_N", /* GPIO_80 */
+ "FP_SPI_MOSI", /* GPIO_81 */
+ "FP_SPI_MISO", /* GPIO_82 */
+ "FP_SPI_CS_N", /* GPIO_83 */
+ "FP_SPI_CLK", /* GPIO_84 */
+ "NC", /* GPIO_85 */
+ "CAM_VDD_1P2_EN", /* GPIO_86 */
+ "MSM_TS_I2C_SDA", /* GPIO_87 */
+ "MSM_TS_I2C_SCL", /* GPIO_88 */
+ "TS_RESOUT_N", /* GPIO_89 */
+ "ESE_SPI_CS_N", /* GPIO_90 */
+ "NC", /* GPIO_91 */
+ "CAM2_AVDD_EN", /* GPIO_92 */
+ "CAM2_VCM_EN", /* GPIO_93 */
+ "NC", /* GPIO_94 */
+ "NC", /* GPIO_95 */
+ "NC", /* GPIO_96 */
+ "GRFC_0", /* GPIO_97 */
+ "GRFC_1", /* GPIO_98 */
+ "NC", /* GPIO_99 */
+ "GRFC_3", /* GPIO_100 */
+ "GRFC_4", /* GPIO_101 */
+ "GRFC_5", /* GPIO_102 */
+ "NC", /* GPIO_103 */
+ "GRFC_7", /* GPIO_104 */
+ "UIM2_DATA", /* GPIO_105 */
+ "UIM2_CLK", /* GPIO_106 */
+ "UIM2_RESET", /* GPIO_107 */
+ "UIM2_PRESENT", /* GPIO_108 */
+ "UIM1_DATA", /* GPIO_109 */
+ "UIM1_CLK", /* GPIO_110 */
+ "UIM1_RESET", /* GPIO_111 */
+ "UIM1_PRESENT", /* GPIO_112 */
+ "UIM_BATT_ALARM", /* GPIO_113 */
+ "GRFC_8", /* GPIO_114 */
+ "GRFC_9", /* GPIO_115 */
+ "TX_GTR_THRES", /* GPIO_116 */
+ "ACCEL_INT", /* GPIO_117 */
+ "GYRO_INT", /* GPIO_118 */
+ "COMPASS_INT", /* GPIO_119 */
+ "PROXIMITY_INT_N", /* GPIO_120 */
+ "FP_IRQ", /* GPIO_121 */
+ "P_SENSE", /* GPIO_122 */
+ "HALL_INTR2", /* GPIO_123 */
+ "HALL_INTR1", /* GPIO_124 */
+ "TS_INT_N", /* GPIO_125 */
+ "NC", /* GPIO_126 */
+ "GRFC_11", /* GPIO_127 */
+ "NC", /* GPIO_128 */
+ "EXT_GPS_LNA_EN", /* GPIO_129 */
+ "NC", /* GPIO_130 */
+ "LCD_ID_DET2", /* GPIO_131 */
+ "LCD_TE2", /* GPIO_132 */
+ "GRFC_14", /* GPIO_133 */
+ "GSM_TX2_PHASE_D", /* GPIO_134 */
+ "NC", /* GPIO_135 */
+ "GRFC_15", /* GPIO_136 */
+ "RFFE3_DATA", /* GPIO_137 */
+ "RFFE3_CLK", /* GPIO_138 */
+ "NC", /* GPIO_139 */
+ "NC", /* GPIO_140 */
+ "RFFE5_DATA", /* GPIO_141 */
+ "RFFE5_CLK", /* GPIO_142 */
+ "NC", /* GPIO_143 */
+ "COEX_UART_TX", /* GPIO_144 */
+ "COEX_UART_RX", /* GPIO_145 */
+ "RFFE2_DATA", /* GPIO_146 */
+ "RFFE2_CLK", /* GPIO_147 */
+ "RFFE1_DATA", /* GPIO_148 */
+ "RFFE1_CLK"; /* GPIO_149 */
+
+ touchscreen_default: touchscreen-default {
+ pins = "gpio89", "gpio125";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ touchscreen_sleep: touchscreen-sleep {
+ pins = "gpio89", "gpio125";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
--
2.35.3

Next message: Damien Le Moal: "Re: [RESEND PATCH] scsi: ufs: sysfs: support writing boot_lun attr"
Previous message: Alec Su: "[PATCH v4 1/2] dt-bindings: arm: qcom: Document xiaomi,natrium board"
In reply to: Alec Su: "[PATCH v4 1/2] dt-bindings: arm: qcom: Document xiaomi,natrium board"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]