Re: [RFC PATCH v4 1/7] mm/demotion: Add support for explicit memory tiers

[Ying Huang]

On Mon, 2022-06-06 at 11:57 +0530, Aneesh Kumar K.V wrote:
> Aneesh Kumar K V <aneesh.kumar@xxxxxxxxxxxxx> writes:
> 
> > On 6/6/22 11:03 AM, Ying Huang wrote:
> > > On Mon, 2022-06-06 at 09:26 +0530, Aneesh Kumar K V wrote:
> > > > On 6/6/22 8:19 AM, Ying Huang wrote:
> > > > > On Thu, 2022-06-02 at 14:07 +0800, Ying Huang wrote:
> > > > > > On Fri, 2022-05-27 at 17:55 +0530, Aneesh Kumar K.V wrote:
> > > > > > > From: Jagdish Gediya <jvgediya@xxxxxxxxxxxxx>
> > > > > > > 
> > > > > > > In the current kernel, memory tiers are defined implicitly via a
> > > > > > > demotion path relationship between NUMA nodes, which is created
> > > > > > > during the kernel initialization and updated when a NUMA node is
> > > > > > > hot-added or hot-removed.  The current implementation puts all
> > > > > > > nodes with CPU into the top tier, and builds the tier hierarchy
> > > > > > > tier-by-tier by establishing the per-node demotion targets based
> > > > > > > on the distances between nodes.
> > > > > > > 
> > > > > > > This current memory tier kernel interface needs to be improved for
> > > > > > > several important use cases,
> > > > > > > 
> > > > > > > The current tier initialization code always initializes
> > > > > > > each memory-only NUMA node into a lower tier.  But a memory-only
> > > > > > > NUMA node may have a high performance memory device (e.g. a DRAM
> > > > > > > device attached via CXL.mem or a DRAM-backed memory-only node on
> > > > > > > a virtual machine) and should be put into a higher tier.
> > > > > > > 
> > > > > > > The current tier hierarchy always puts CPU nodes into the top
> > > > > > > tier. But on a system with HBM or GPU devices, the
> > > > > > > memory-only NUMA nodes mapping these devices should be in the
> > > > > > > top tier, and DRAM nodes with CPUs are better to be placed into the
> > > > > > > next lower tier.
> > > > > > > 
> > > > > > > With current kernel higher tier node can only be demoted to selected nodes on the
> > > > > > > next lower tier as defined by the demotion path, not any other
> > > > > > > node from any lower tier.  This strict, hard-coded demotion order
> > > > > > > does not work in all use cases (e.g. some use cases may want to
> > > > > > > allow cross-socket demotion to another node in the same demotion
> > > > > > > tier as a fallback when the preferred demotion node is out of
> > > > > > > space), This demotion order is also inconsistent with the page
> > > > > > > allocation fallback order when all the nodes in a higher tier are
> > > > > > > out of space: The page allocation can fall back to any node from
> > > > > > > any lower tier, whereas the demotion order doesn't allow that.
> > > > > > > 
> > > > > > > The current kernel also don't provide any interfaces for the
> > > > > > > userspace to learn about the memory tier hierarchy in order to
> > > > > > > optimize its memory allocations.
> > > > > > > 
> > > > > > > This patch series address the above by defining memory tiers explicitly.
> > > > > > > 
> > > > > > > This patch adds below sysfs interface which is read-only and
> > > > > > > can be used to read nodes available in specific tier.
> > > > > > > 
> > > > > > > /sys/devices/system/memtier/memtierN/nodelist
> > > > > > > 
> > > > > > > Tier 0 is the highest tier, while tier MAX_MEMORY_TIERS - 1 is the
> > > > > > > lowest tier. The absolute value of a tier id number has no specific
> > > > > > > meaning. what matters is the relative order of the tier id numbers.
> > > > > > > 
> > > > > > > All the tiered memory code is guarded by CONFIG_TIERED_MEMORY.
> > > > > > > Default number of memory tiers are MAX_MEMORY_TIERS(3). All the
> > > > > > > nodes are by default assigned to DEFAULT_MEMORY_TIER(1).
> > > > > > > 
> > > > > > > Default memory tier can be read from,
> > > > > > > /sys/devices/system/memtier/default_tier
> > > > > > > 
> > > > > > > Max memory tier can be read from,
> > > > > > > /sys/devices/system/memtier/max_tiers
> > > > > > > 
> > > > > > > This patch implements the RFC spec sent by Wei Xu <weixugc@xxxxxxxxxx> at [1].
> > > > > > > 
> > > > > > > [1] https://lore.kernel.org/linux-mm/CAAPL-u-DGLcKRVDnChN9ZhxPkfxQvz9Sb93kVoX_4J2oiJSkUw@xxxxxxxxxxxxxx/
> > > > > > > 
> > > > > > > Signed-off-by: Jagdish Gediya <jvgediya@xxxxxxxxxxxxx>
> > > > > > > Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@xxxxxxxxxxxxx>
> > > > > > 
> > > > > > IMHO, we should change the kernel internal implementation firstly, then
> > > > > > implement the kerne/user space interface.  That is, make memory tier
> > > > > > explicit inside kernel, then expose it to user space.
> > > > > 
> > > > > Why ignore this comment for v5?  If you don't agree, please respond me.
> > > > > 
> > > > 
> > > > I am not sure what benefit such a rearrange would bring in? Right now I
> > > > am writing the series from the point of view of introducing all the
> > > > plumbing and them switching the existing demotion logic to use the new
> > > > infrastructure. Redoing the code to hide all the userspace sysfs till we
> > > > switch the demotion logic to use the new infrastructure doesn't really
> > > > bring any additional clarity to patch review and would require me to
> > > > redo the series with a lot of conflicts across the patches in the patchset.
> > > 
> > > IMHO, we shouldn't introduce regression even in the middle of a
> > > patchset.  Each step should only rely on previous patches in the series
> > > to work correctly.  In your current way of organization, after patch
> > > [1/7], on a system with 2 memory tiers, the user space interface will
> > > output wrong information (only 1 memory tier).  So I think the correct
> > > way is to make it right inside the kenrel firstly, then expose the right
> > > information to user space.
> > > 
> > 
> > The patchset doesn't add additional tier until "mm/demotion/dax/kmem: 
> > Set node's memory tier to MEMORY_TIER_PMEM". ie, there is no additional 
> > tiers done till all the demotion logic is in place. So even if the 
> > system got dax/kmem, the support for adding dax/kmem as a memory tier 
> > comes later in the patch series.
> 
> Let me clarify this a bit more. This patchset doesn't change the
> existing kernel behavior till "mm/demotion: Build demotion targets
> based on explicit memory tiers". So there is no regression till then.
> It adds a parallel framework (memory tiers to the existing demotion
> logic).
> 
> I can move the patch "mm/demotion/dax/kmem: Set node's memory tier to
> MEMORY_TIER_PMEM" before switching the demotion logic so that on systems
> with two memory tiers (DRAM and pmem) the demotion continues to work
> as expected after patch 3 ("mm/demotion: Build demotion targets based on
> explicit memory tiers"). With that, there will not be any regression in
> between the patch series.
> 

Thanks!  Please do that.  And I think you can add sysfs interface after
that patch too.  That is, in [1/7]

+struct memory_tier {
+	nodemask_t nodelist;
+};

And struct device can be added after the kernel has switched the
implementation based on explicit memory tiers.

+struct memory_tier {
+	struct device dev;
+	nodemask_t nodelist;
+};

But I don't think it's a good idea to have "struct device" embedded in
"struct memory_tier".  We don't have "struct device" embedded in "struct
pgdata_list"...

Best Regards,
Huang, Ying