[PATCH 19/36] serial: omap: Fill in rs485_supported

[Ilpo Järvinen]

Add information on supported serial_rs485 features.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
 drivers/tty/serial/omap-serial.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 46f4d4cacb6e..98622c35d896 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1559,6 +1559,13 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
 	return 0;
 }
 
+static const struct serial_rs485 serial_omap_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND |
+		 SER_RS485_RX_DURING_TX,
+	.delay_rts_before_send = 1,
+	.delay_rts_after_send = 1,
+};
+
 static int serial_omap_probe(struct platform_device *pdev)
 {
 	struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev);
@@ -1636,6 +1643,7 @@ static int serial_omap_probe(struct platform_device *pdev)
 	up->port.flags = omap_up_info->flags;
 	up->port.uartclk = omap_up_info->uartclk;
 	up->port.rs485_config = serial_omap_config_rs485;
+	up->port.rs485_supported = &serial_omap_rs485_supported;
 	if (!up->port.uartclk) {
 		up->port.uartclk = DEFAULT_CLK_SPEED;
 		dev_warn(&pdev->dev,
-- 
2.30.2