[PATCH net] net: dsa: realtek: rtl8365mb: fix GMII caps for ports with internal PHY

[Alvin Šipraga]

From: Alvin Šipraga <alsi@xxxxxxxxxxxxxxx>

phylib defaults to GMII when no phy-mode or phy-connection-type property
is specified in a DSA port node.

Commit a5dba0f207e5 ("net: dsa: rtl8365mb: add GMII as user port mode")
introduced implicit support for GMII mode on ports with internal PHY to
allow a PHY connection for device trees where the phy-mode is not
explicitly set to "internal".

Commit 6ff6064605e9 ("net: dsa: realtek: convert to phylink_generic_validate()")
then broke this behaviour by discarding the usage of
rtl8365mb_phy_mode_supported() - where this GMII support was indicated -
while switching to the new .phylink_get_caps API.

With the new API, rtl8365mb_phy_mode_supported() is no longer needed.
Remove it altogether and add back the GMII capability - this time to
rtl8365mb_phylink_get_caps() - so that the above default behaviour works
for ports with internal PHY again.

Fixes: 6ff6064605e9 ("net: dsa: realtek: convert to phylink_generic_validate()")
Signed-off-by: Alvin Šipraga <alsi@xxxxxxxxxxxxxxx>
---

Luiz, Russel:

Commit a5dba0f207e5 ought to have had a Fixes: tag I think, because it
claims to have been fixing a regression in the net-next tree - is that
right? I seem to have missed both referenced commits when they were
posted and never hit this issue personally. I only found things now
during some other refactoring and the test for GMII looked weird to me
so I went and investigated.

Could you please help me identify that Fixes: tag? Just for my own
understanding of what caused this added requirement for GMII on ports
with internal PHY.

---
 drivers/net/dsa/realtek/rtl8365mb.c | 38 +++++++----------------------
 1 file changed, 9 insertions(+), 29 deletions(-)

diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
index 3bb42a9f236d..769f672e9128 100644
--- a/drivers/net/dsa/realtek/rtl8365mb.c
+++ b/drivers/net/dsa/realtek/rtl8365mb.c
@@ -955,35 +955,21 @@ static int rtl8365mb_ext_config_forcemode(struct realtek_priv *priv, int port,
 	return 0;
 }
 
-static bool rtl8365mb_phy_mode_supported(struct dsa_switch *ds, int port,
-					 phy_interface_t interface)
-{
-	int ext_int;
-
-	ext_int = rtl8365mb_extint_port_map[port];
-
-	if (ext_int < 0 &&
-	    (interface == PHY_INTERFACE_MODE_NA ||
-	     interface == PHY_INTERFACE_MODE_INTERNAL ||
-	     interface == PHY_INTERFACE_MODE_GMII))
-		/* Internal PHY */
-		return true;
-	else if ((ext_int >= 1) &&
-		 phy_interface_mode_is_rgmii(interface))
-		/* Extension MAC */
-		return true;
-
-	return false;
-}
-
 static void rtl8365mb_phylink_get_caps(struct dsa_switch *ds, int port,
 				       struct phylink_config *config)
 {
-	if (dsa_is_user_port(ds, port))
+	if (dsa_is_user_port(ds, port)) {
 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
 			  config->supported_interfaces);
-	else if (dsa_is_cpu_port(ds, port))
+
+		/* GMII is the default interface mode for phylib, so
+		 * we have to support it for ports with integrated PHY.
+		 */
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
+	} else if (dsa_is_cpu_port(ds, port)) {
 		phy_interface_set_rgmii(config->supported_interfaces);
+	}
 
 	config->mac_capabilities = MAC_SYM_PAUSE | MAC_ASYM_PAUSE |
 				   MAC_10 | MAC_100 | MAC_1000FD;
@@ -996,12 +982,6 @@ static void rtl8365mb_phylink_mac_config(struct dsa_switch *ds, int port,
 	struct realtek_priv *priv = ds->priv;
 	int ret;
 
-	if (!rtl8365mb_phy_mode_supported(ds, port, state->interface)) {
-		dev_err(priv->dev, "phy mode %s is unsupported on port %d\n",
-			phy_modes(state->interface), port);
-		return;
-	}
-
 	if (mode != MLO_AN_PHY && mode != MLO_AN_FIXED) {
 		dev_err(priv->dev,
 			"port %d supports only conventional PHY or fixed-link\n",
-- 
2.36.0