[PATCH] staging: Also remove the Unisys visorbus.h

[Peter Robinson]

The commit that removed the Unisys s-Par and visorbus drivers
left around the include/linux/visorbus.h file mentioned in the
MAINTAINERS entry, we can also remove that too.

Fixes: e5f45b011e4a ("staging: Remove the drivers for the Unisys s-Par")
Signed-off-by: Peter Robinson <pbrobinson@xxxxxxxxx>
---
 include/linux/visorbus.h | 344 ---------------------------------------
 1 file changed, 344 deletions(-)
 delete mode 100644 include/linux/visorbus.h

diff --git a/include/linux/visorbus.h b/include/linux/visorbus.h
deleted file mode 100644
index 0d8bd6769b13..000000000000
--- a/include/linux/visorbus.h
+++ /dev/null
@@ -1,344 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2010 - 2013 UNISYS CORPORATION
- * All rights reserved.
- */
-
-/*
- *  This header file is to be included by other kernel mode components that
- *  implement a particular kind of visor_device.  Each of these other kernel
- *  mode components is called a visor device driver.  Refer to visortemplate
- *  for a minimal sample visor device driver.
- *
- *  There should be nothing in this file that is private to the visorbus
- *  bus implementation itself.
- */
-
-#ifndef __VISORBUS_H__
-#define __VISORBUS_H__
-
-#include <linux/device.h>
-
-#define VISOR_CHANNEL_SIGNATURE ('L' << 24 | 'N' << 16 | 'C' << 8 | 'E')
-
-/*
- * enum channel_serverstate
- * @CHANNELSRV_UNINITIALIZED: Channel is in an undefined state.
- * @CHANNELSRV_READY:	      Channel has been initialized by server.
- */
-enum channel_serverstate {
-	CHANNELSRV_UNINITIALIZED = 0,
-	CHANNELSRV_READY = 1
-};
-
-/*
- * enum channel_clientstate
- * @CHANNELCLI_DETACHED:
- * @CHANNELCLI_DISABLED:  Client can see channel but is NOT allowed to use it
- *			  unless given TBD* explicit request
- *			  (should actually be < DETACHED).
- * @CHANNELCLI_ATTACHING: Legacy EFI client request for EFI server to attach.
- * @CHANNELCLI_ATTACHED:  Idle, but client may want to use channel any time.
- * @CHANNELCLI_BUSY:	  Client either wants to use or is using channel.
- * @CHANNELCLI_OWNED:	  "No worries" state - client can access channel
- *			  anytime.
- */
-enum channel_clientstate {
-	CHANNELCLI_DETACHED = 0,
-	CHANNELCLI_DISABLED = 1,
-	CHANNELCLI_ATTACHING = 2,
-	CHANNELCLI_ATTACHED = 3,
-	CHANNELCLI_BUSY = 4,
-	CHANNELCLI_OWNED = 5
-};
-
-/*
- * Values for VISOR_CHANNEL_PROTOCOL.Features: This define exists so that
- * a guest can look at the FeatureFlags in the io channel, and configure the
- * driver to use interrupts or not based on this setting. All feature bits for
- * all channels should be defined here. The io channel feature bits are defined
- * below.
- */
-#define VISOR_DRIVER_ENABLES_INTS (0x1ULL << 1)
-#define VISOR_CHANNEL_IS_POLLING (0x1ULL << 3)
-#define VISOR_IOVM_OK_DRIVER_DISABLING_INTS (0x1ULL << 4)
-#define VISOR_DRIVER_DISABLES_INTS (0x1ULL << 5)
-#define VISOR_DRIVER_ENHANCED_RCVBUF_CHECKING (0x1ULL << 6)
-
-/*
- * struct channel_header - Common Channel Header
- * @signature:	       Signature.
- * @legacy_state:      DEPRECATED - being replaced by.
- * @header_size:       sizeof(struct channel_header).
- * @size:	       Total size of this channel in bytes.
- * @features:	       Flags to modify behavior.
- * @chtype:	       Channel type: data, bus, control, etc..
- * @partition_handle:  ID of guest partition.
- * @handle:	       Device number of this channel in client.
- * @ch_space_offset:   Offset in bytes to channel specific area.
- * @version_id:	       Struct channel_header Version ID.
- * @partition_index:   Index of guest partition.
- * @zone_uuid:	       Guid of Channel's zone.
- * @cli_str_offset:    Offset from channel header to null-terminated
- *		       ClientString (0 if ClientString not present).
- * @cli_state_boot:    CHANNEL_CLIENTSTATE of pre-boot EFI client of this
- *		       channel.
- * @cmd_state_cli:     CHANNEL_COMMANDSTATE (overloaded in Windows drivers, see
- *		       ServerStateUp, ServerStateDown, etc).
- * @cli_state_os:      CHANNEL_CLIENTSTATE of Guest OS client of this channel.
- * @ch_characteristic: CHANNEL_CHARACTERISTIC_<xxx>.
- * @cmd_state_srv:     CHANNEL_COMMANDSTATE (overloaded in Windows drivers, see
- *		       ServerStateUp, ServerStateDown, etc).
- * @srv_state:	       CHANNEL_SERVERSTATE.
- * @cli_error_boot:    Bits to indicate err states for boot clients, so err
- *		       messages can be throttled.
- * @cli_error_os:      Bits to indicate err states for OS clients, so err
- *		       messages can be throttled.
- * @filler:	       Pad out to 128 byte cacheline.
- * @recover_channel:   Please add all new single-byte values below here.
- */
-struct channel_header {
-	u64 signature;
-	u32 legacy_state;
-	/* SrvState, CliStateBoot, and CliStateOS below */
-	u32 header_size;
-	u64 size;
-	u64 features;
-	guid_t chtype;
-	u64 partition_handle;
-	u64 handle;
-	u64 ch_space_offset;
-	u32 version_id;
-	u32 partition_index;
-	guid_t zone_guid;
-	u32 cli_str_offset;
-	u32 cli_state_boot;
-	u32 cmd_state_cli;
-	u32 cli_state_os;
-	u32 ch_characteristic;
-	u32 cmd_state_srv;
-	u32 srv_state;
-	u8 cli_error_boot;
-	u8 cli_error_os;
-	u8 filler[1];
-	u8 recover_channel;
-} __packed;
-
-#define VISOR_CHANNEL_ENABLE_INTS (0x1ULL << 0)
-
-/*
- * struct signal_queue_header - Subheader for the Signal Type variation of the
- *                              Common Channel.
- * @version:	      SIGNAL_QUEUE_HEADER Version ID.
- * @chtype:	      Queue type: storage, network.
- * @size:	      Total size of this queue in bytes.
- * @sig_base_offset:  Offset to signal queue area.
- * @features:	      Flags to modify behavior.
- * @num_sent:	      Total # of signals placed in this queue.
- * @num_overflows:    Total # of inserts failed due to full queue.
- * @signal_size:      Total size of a signal for this queue.
- * @max_slots:        Max # of slots in queue, 1 slot is always empty.
- * @max_signals:      Max # of signals in queue (MaxSignalSlots-1).
- * @head:	      Queue head signal #.
- * @num_received:     Total # of signals removed from this queue.
- * @tail:	      Queue tail signal.
- * @reserved1:	      Reserved field.
- * @reserved2:	      Reserved field.
- * @client_queue:
- * @num_irq_received: Total # of Interrupts received. This is incremented by the
- *		      ISR in the guest windows driver.
- * @num_empty:	      Number of times that visor_signal_remove is called and
- *		      returned Empty Status.
- * @errorflags:	      Error bits set during SignalReinit to denote trouble with
- *		      client's fields.
- * @filler:	      Pad out to 64 byte cacheline.
- */
-struct signal_queue_header {
-	/* 1st cache line */
-	u32 version;
-	u32 chtype;
-	u64 size;
-	u64 sig_base_offset;
-	u64 features;
-	u64 num_sent;
-	u64 num_overflows;
-	u32 signal_size;
-	u32 max_slots;
-	u32 max_signals;
-	u32 head;
-	/* 2nd cache line */
-	u64 num_received;
-	u32 tail;
-	u32 reserved1;
-	u64 reserved2;
-	u64 client_queue;
-	u64 num_irq_received;
-	u64 num_empty;
-	u32 errorflags;
-	u8 filler[12];
-} __packed;
-
-/* VISORCHANNEL Guids */
-/* {414815ed-c58c-11da-95a9-00e08161165f} */
-#define VISOR_VHBA_CHANNEL_GUID \
-	GUID_INIT(0x414815ed, 0xc58c, 0x11da, \
-		  0x95, 0xa9, 0x0, 0xe0, 0x81, 0x61, 0x16, 0x5f)
-#define VISOR_VHBA_CHANNEL_GUID_STR \
-	"414815ed-c58c-11da-95a9-00e08161165f"
-struct visorchipset_state {
-	u32 created:1;
-	u32 attached:1;
-	u32 configured:1;
-	u32 running:1;
-	/* Remaining bits in this 32-bit word are reserved. */
-};
-
-/**
- * struct visor_device - A device type for things "plugged" into the visorbus
- *                       bus
- * @visorchannel:		Points to the channel that the device is
- *				associated with.
- * @channel_type_guid:		Identifies the channel type to the bus driver.
- * @device:			Device struct meant for use by the bus driver
- *				only.
- * @list_all:			Used by the bus driver to enumerate devices.
- * @timer:		        Timer fired periodically to do interrupt-type
- *				activity.
- * @being_removed:		Indicates that the device is being removed from
- *				the bus. Private bus driver use only.
- * @visordriver_callback_lock:	Used by the bus driver to lock when adding and
- *				removing devices.
- * @pausing:			Indicates that a change towards a paused state.
- *				is in progress. Only modified by the bus driver.
- * @resuming:			Indicates that a change towards a running state
- *				is in progress. Only modified by the bus driver.
- * @chipset_bus_no:		Private field used by the bus driver.
- * @chipset_dev_no:		Private field used the bus driver.
- * @state:			Used to indicate the current state of the
- *				device.
- * @inst:			Unique GUID for this instance of the device.
- * @name:			Name of the device.
- * @pending_msg_hdr:		For private use by bus driver to respond to
- *				hypervisor requests.
- * @vbus_hdr_info:		A pointer to header info. Private use by bus
- *				driver.
- * @partition_guid:		Indicates client partion id. This should be the
- *				same across all visor_devices in the current
- *				guest. Private use by bus driver only.
- */
-struct visor_device {
-	struct visorchannel *visorchannel;
-	guid_t channel_type_guid;
-	/* These fields are for private use by the bus driver only. */
-	struct device device;
-	struct list_head list_all;
-	struct timer_list timer;
-	bool timer_active;
-	bool being_removed;
-	struct mutex visordriver_callback_lock; /* synchronize probe/remove */
-	bool pausing;
-	bool resuming;
-	u32 chipset_bus_no;
-	u32 chipset_dev_no;
-	struct visorchipset_state state;
-	guid_t inst;
-	u8 *name;
-	struct controlvm_message_header *pending_msg_hdr;
-	void *vbus_hdr_info;
-	guid_t partition_guid;
-	struct dentry *debugfs_dir;
-	struct dentry *debugfs_bus_info;
-};
-
-#define to_visor_device(x) container_of(x, struct visor_device, device)
-
-typedef void (*visorbus_state_complete_func) (struct visor_device *dev,
-					      int status);
-
-/*
- * This struct describes a specific visor channel, by providing its GUID, name,
- * and sizes.
- */
-struct visor_channeltype_descriptor {
-	const guid_t guid;
-	const char *name;
-	u64 min_bytes;
-	u32 version;
-};
-
-/**
- * struct visor_driver - Information provided by each visor driver when it
- *                       registers with the visorbus driver
- * @name:		Name of the visor driver.
- * @owner:		The module owner.
- * @channel_types:	Types of channels handled by this driver, ending with
- *			a zero GUID. Our specialized BUS.match() method knows
- *			about this list, and uses it to determine whether this
- *			driver will in fact handle a new device that it has
- *			detected.
- * @probe:		Called when a new device comes online, by our probe()
- *			function specified by driver.probe() (triggered
- *			ultimately by some call to driver_register(),
- *			bus_add_driver(), or driver_attach()).
- * @remove:		Called when a new device is removed, by our remove()
- *			function specified by driver.remove() (triggered
- *			ultimately by some call to device_release_driver()).
- * @channel_interrupt:	Called periodically, whenever there is a possiblity
- *			that "something interesting" may have happened to the
- *			channel.
- * @pause:		Called to initiate a change of the device's state.  If
- *			the return valu`e is < 0, there was an error and the
- *			state transition will NOT occur.  If the return value
- *			is >= 0, then the state transition was INITIATED
- *			successfully, and complete_func() will be called (or
- *			was just called) with the final status when either the
- *			state transition fails or completes successfully.
- * @resume:		Behaves similar to pause.
- * @driver:		Private reference to the device driver. For use by bus
- *			driver only.
- */
-struct visor_driver {
-	const char *name;
-	struct module *owner;
-	struct visor_channeltype_descriptor *channel_types;
-	int (*probe)(struct visor_device *dev);
-	void (*remove)(struct visor_device *dev);
-	void (*channel_interrupt)(struct visor_device *dev);
-	int (*pause)(struct visor_device *dev,
-		     visorbus_state_complete_func complete_func);
-	int (*resume)(struct visor_device *dev,
-		      visorbus_state_complete_func complete_func);
-
-	/* These fields are for private use by the bus driver only. */
-	struct device_driver driver;
-};
-
-#define to_visor_driver(x) (container_of(x, struct visor_driver, driver))
-
-int visor_check_channel(struct channel_header *ch, struct device *dev,
-			const guid_t *expected_uuid, char *chname,
-			u64 expected_min_bytes,	u32 expected_version,
-			u64 expected_signature);
-
-int visorbus_register_visor_driver(struct visor_driver *drv);
-void visorbus_unregister_visor_driver(struct visor_driver *drv);
-int visorbus_read_channel(struct visor_device *dev,
-			  unsigned long offset, void *dest,
-			  unsigned long nbytes);
-int visorbus_write_channel(struct visor_device *dev,
-			   unsigned long offset, void *src,
-			   unsigned long nbytes);
-int visorbus_enable_channel_interrupts(struct visor_device *dev);
-void visorbus_disable_channel_interrupts(struct visor_device *dev);
-
-int visorchannel_signalremove(struct visorchannel *channel, u32 queue,
-			      void *msg);
-int visorchannel_signalinsert(struct visorchannel *channel, u32 queue,
-			      void *msg);
-bool visorchannel_signalempty(struct visorchannel *channel, u32 queue);
-const guid_t *visorchannel_get_guid(struct visorchannel *channel);
-
-#define BUS_ROOT_DEVICE UINT_MAX
-struct visor_device *visorbus_get_device_by_id(u32 bus_no, u32 dev_no,
-					       struct visor_device *from);
-#endif
-- 
2.36.1