[PATCH 1/5] gpio: 104-dio-48e: Implement and utilize register structures

[William Breathitt Gray]

Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures.

Signed-off-by: William Breathitt Gray <william.gray@xxxxxxxxxx>
---
 drivers/gpio/gpio-104-dio-48e.c | 157 +++++++++++++++++++++-----------
 1 file changed, 106 insertions(+), 51 deletions(-)

diff --git a/drivers/gpio/gpio-104-dio-48e.c b/drivers/gpio/gpio-104-dio-48e.c
index f118ad9bcd33..e1c5759e0902 100644
--- a/drivers/gpio/gpio-104-dio-48e.c
+++ b/drivers/gpio/gpio-104-dio-48e.c
@@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/spinlock.h>
+#include <linux/types.h>
 
 #define DIO48E_EXTENT 16
 #define MAX_NUM_DIO48E max_num_isa_dev(DIO48E_EXTENT)
@@ -33,6 +34,40 @@ static unsigned int irq[MAX_NUM_DIO48E];
 module_param_hw_array(irq, uint, irq, NULL, 0);
 MODULE_PARM_DESC(irq, "ACCES 104-DIO-48E interrupt line numbers");
 
+/**
+ * struct i8255_reg - Intel 8255 register structure
+ * @port:	Port A, B, and C
+ * @control:	Control register
+ */
+struct i8255_reg {
+	u8 port[3];
+	u8 control;
+};
+
+/**
+ * struct dio48e_reg - device register structure
+ * @ppi:		Programmable Peripheral Interface groups
+ * @enable_buffer:	Enable/Disable Buffer groups
+ * @unused1:		Unused
+ * @enable_interrupt:	Write: Enable Interrupt
+ *			Read: Disable Interrupt
+ * @unused2:		Unused
+ * @enable_counter:	Write: Enable Counter/Timer Addressing
+ *			Read: Disable Counter/Timer Addressing
+ * @unused3:		Unused
+ * @clear_interrupt:	Clear Interrupt
+ */
+struct dio48e_reg {
+	struct i8255_reg ppi[2];
+	u8 enable_buffer[2];
+	u8 unused1;
+	u8 enable_interrupt;
+	u8 unused2;
+	u8 enable_counter;
+	u8 unused3;
+	u8 clear_interrupt;
+};
+
 /**
  * struct dio48e_gpio - GPIO device private data structure
  * @chip:	instance of the gpio_chip
@@ -40,7 +75,7 @@ MODULE_PARM_DESC(irq, "ACCES 104-DIO-48E interrupt line numbers");
  * @out_state:	output bits state
  * @control:	Control registers state
  * @lock:	synchronization lock to prevent I/O race conditions
- * @base:	base port address of the GPIO device
+ * @reg:	I/O address offset for the device registers
  * @irq_mask:	I/O bits affected by interrupts
  */
 struct dio48e_gpio {
@@ -49,7 +84,7 @@ struct dio48e_gpio {
 	unsigned char out_state[6];
 	unsigned char control[2];
 	raw_spinlock_t lock;
-	void __iomem *base;
+	struct dio48e_reg __iomem *reg;
 	unsigned char irq_mask;
 };
 
@@ -69,32 +104,33 @@ static int dio48e_gpio_direction_input(struct gpio_chip *chip, unsigned int offs
 {
 	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
 	const unsigned int io_port = offset / 8;
-	const unsigned int control_port = io_port / 3;
-	void __iomem *const control_addr = dio48egpio->base + 3 + control_port * 4;
+	const unsigned long group = io_port / 3;
+	const unsigned long port = io_port - (group * 3);
+	u8 __iomem *const control_addr = &dio48egpio->reg->ppi[group].control;
 	unsigned long flags;
 	unsigned int control;
 
 	raw_spin_lock_irqsave(&dio48egpio->lock, flags);
 
 	/* Check if configuring Port C */
-	if (io_port == 2 || io_port == 5) {
+	if (port == 2) {
 		/* Port C can be configured by nibble */
 		if (offset % 8 > 3) {
 			dio48egpio->io_state[io_port] |= 0xF0;
-			dio48egpio->control[control_port] |= BIT(3);
+			dio48egpio->control[group] |= BIT(3);
 		} else {
 			dio48egpio->io_state[io_port] |= 0x0F;
-			dio48egpio->control[control_port] |= BIT(0);
+			dio48egpio->control[group] |= BIT(0);
 		}
 	} else {
 		dio48egpio->io_state[io_port] |= 0xFF;
-		if (io_port == 0 || io_port == 3)
-			dio48egpio->control[control_port] |= BIT(4);
+		if (port == 0)
+			dio48egpio->control[group] |= BIT(4);
 		else
-			dio48egpio->control[control_port] |= BIT(1);
+			dio48egpio->control[group] |= BIT(1);
 	}
 
-	control = BIT(7) | dio48egpio->control[control_port];
+	control = BIT(7) | dio48egpio->control[group];
 	iowrite8(control, control_addr);
 	control &= ~BIT(7);
 	iowrite8(control, control_addr);
@@ -109,31 +145,33 @@ static int dio48e_gpio_direction_output(struct gpio_chip *chip, unsigned int off
 {
 	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
 	const unsigned int io_port = offset / 8;
-	const unsigned int control_port = io_port / 3;
+	const unsigned long group = io_port / 3;
+	const unsigned long port = io_port - (group * 3);
 	const unsigned int mask = BIT(offset % 8);
-	void __iomem *const control_addr = dio48egpio->base + 3 + control_port * 4;
-	const unsigned int out_port = (io_port > 2) ? io_port + 1 : io_port;
+	struct i8255_reg __iomem *const ppi = dio48egpio->reg->ppi + group;
+	u8 __iomem *const control_addr = &ppi->control;
+	u8 __iomem *const port_addr = ppi->port + port;
 	unsigned long flags;
 	unsigned int control;
 
 	raw_spin_lock_irqsave(&dio48egpio->lock, flags);
 
 	/* Check if configuring Port C */
-	if (io_port == 2 || io_port == 5) {
+	if (port == 2) {
 		/* Port C can be configured by nibble */
 		if (offset % 8 > 3) {
 			dio48egpio->io_state[io_port] &= 0x0F;
-			dio48egpio->control[control_port] &= ~BIT(3);
+			dio48egpio->control[group] &= ~BIT(3);
 		} else {
 			dio48egpio->io_state[io_port] &= 0xF0;
-			dio48egpio->control[control_port] &= ~BIT(0);
+			dio48egpio->control[group] &= ~BIT(0);
 		}
 	} else {
 		dio48egpio->io_state[io_port] &= 0x00;
-		if (io_port == 0 || io_port == 3)
-			dio48egpio->control[control_port] &= ~BIT(4);
+		if (port == 0)
+			dio48egpio->control[group] &= ~BIT(4);
 		else
-			dio48egpio->control[control_port] &= ~BIT(1);
+			dio48egpio->control[group] &= ~BIT(1);
 	}
 
 	if (value)
@@ -141,10 +179,10 @@ static int dio48e_gpio_direction_output(struct gpio_chip *chip, unsigned int off
 	else
 		dio48egpio->out_state[io_port] &= ~mask;
 
-	control = BIT(7) | dio48egpio->control[control_port];
+	control = BIT(7) | dio48egpio->control[group];
 	iowrite8(control, control_addr);
 
-	iowrite8(dio48egpio->out_state[io_port], dio48egpio->base + out_port);
+	iowrite8(dio48egpio->out_state[io_port], port_addr);
 
 	control &= ~BIT(7);
 	iowrite8(control, control_addr);
@@ -159,7 +197,8 @@ static int dio48e_gpio_get(struct gpio_chip *chip, unsigned int offset)
 	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
 	const unsigned int port = offset / 8;
 	const unsigned int mask = BIT(offset % 8);
-	const unsigned int in_port = (port > 2) ? port + 1 : port;
+	const unsigned long group = port / 3;
+	const unsigned long in_port = port - (group * 3);
 	unsigned long flags;
 	unsigned int port_state;
 
@@ -171,29 +210,33 @@ static int dio48e_gpio_get(struct gpio_chip *chip, unsigned int offset)
 		return -EINVAL;
 	}
 
-	port_state = ioread8(dio48egpio->base + in_port);
+	port_state = ioread8(dio48egpio->reg->ppi[group].port + in_port);
 
 	raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
 
 	return !!(port_state & mask);
 }
 
-static const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
-
 static int dio48e_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
 	unsigned long *bits)
 {
 	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
 	unsigned long offset;
 	unsigned long gpio_mask;
-	void __iomem *port_addr;
+	unsigned long port;
+	unsigned long group;
+	unsigned long in_port;
+	u8 __iomem *port_addr;
 	unsigned long port_state;
 
 	/* clear bits array to a clean slate */
 	bitmap_zero(bits, chip->ngpio);
 
-	for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
-		port_addr = dio48egpio->base + ports[offset / 8];
+	for_each_set_clump8(offset, gpio_mask, mask, chip->ngpio) {
+		port = offset / 8;
+		group = port / 3;
+		in_port = port - (group * 3);
+		port_addr = dio48egpio->reg->ppi[group].port + in_port;
 		port_state = ioread8(port_addr) & gpio_mask;
 
 		bitmap_set_value8(bits, port_state, offset);
@@ -207,7 +250,8 @@ static void dio48e_gpio_set(struct gpio_chip *chip, unsigned int offset, int val
 	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
 	const unsigned int port = offset / 8;
 	const unsigned int mask = BIT(offset % 8);
-	const unsigned int out_port = (port > 2) ? port + 1 : port;
+	const unsigned long group = port / 3;
+	const unsigned long out_port = port - (group * 3);
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&dio48egpio->lock, flags);
@@ -217,7 +261,8 @@ static void dio48e_gpio_set(struct gpio_chip *chip, unsigned int offset, int val
 	else
 		dio48egpio->out_state[port] &= ~mask;
 
-	iowrite8(dio48egpio->out_state[port], dio48egpio->base + out_port);
+	iowrite8(dio48egpio->out_state[port],
+		 dio48egpio->reg->ppi[group].port + out_port);
 
 	raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
 }
@@ -229,13 +274,17 @@ static void dio48e_gpio_set_multiple(struct gpio_chip *chip,
 	unsigned long offset;
 	unsigned long gpio_mask;
 	size_t index;
-	void __iomem *port_addr;
+	size_t group;
+	size_t out_port;
+	u8 __iomem *port_addr;
 	unsigned long bitmask;
 	unsigned long flags;
 
-	for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+	for_each_set_clump8(offset, gpio_mask, mask, chip->ngpio) {
 		index = offset / 8;
-		port_addr = dio48egpio->base + ports[index];
+		group = index / 3;
+		out_port = index - (group * 3);
+		port_addr = dio48egpio->reg->ppi[group].port + out_port;
 
 		bitmask = bitmap_get_value8(bits, offset) & gpio_mask;
 
@@ -274,7 +323,7 @@ static void dio48e_irq_mask(struct irq_data *data)
 
 	if (!dio48egpio->irq_mask)
 		/* disable interrupts */
-		ioread8(dio48egpio->base + 0xB);
+		ioread8(&dio48egpio->reg->enable_interrupt);
 
 	raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
 }
@@ -294,8 +343,8 @@ static void dio48e_irq_unmask(struct irq_data *data)
 
 	if (!dio48egpio->irq_mask) {
 		/* enable interrupts */
-		iowrite8(0x00, dio48egpio->base + 0xF);
-		iowrite8(0x00, dio48egpio->base + 0xB);
+		iowrite8(0x00, &dio48egpio->reg->clear_interrupt);
+		iowrite8(0x00, &dio48egpio->reg->enable_interrupt);
 	}
 
 	if (offset == 19)
@@ -341,7 +390,7 @@ static irqreturn_t dio48e_irq_handler(int irq, void *dev_id)
 
 	raw_spin_lock(&dio48egpio->lock);
 
-	iowrite8(0x00, dio48egpio->base + 0xF);
+	iowrite8(0x00, &dio48egpio->reg->clear_interrupt);
 
 	raw_spin_unlock(&dio48egpio->lock);
 
@@ -373,11 +422,25 @@ static int dio48e_irq_init_hw(struct gpio_chip *gc)
 	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(gc);
 
 	/* Disable IRQ by default */
-	ioread8(dio48egpio->base + 0xB);
+	ioread8(&dio48egpio->reg->enable_interrupt);
 
 	return 0;
 }
 
+static void dio48e_init_ppi(struct i8255_reg __iomem *const ppi)
+{
+	/* Activate Mode Set; set Mode 0 output mode for Port A, B, and C */
+	iowrite8(0x80, &ppi->control);
+
+	/* Initialize all GPIO to 0 */
+	iowrite8(0x00, &ppi->port[0]);
+	iowrite8(0x00, &ppi->port[1]);
+	iowrite8(0x00, &ppi->port[2]);
+
+	/* Deactivate Mode Set */
+	iowrite8(0x00, &ppi->control);
+}
+
 static int dio48e_probe(struct device *dev, unsigned int id)
 {
 	struct dio48e_gpio *dio48egpio;
@@ -395,8 +458,8 @@ static int dio48e_probe(struct device *dev, unsigned int id)
 		return -EBUSY;
 	}
 
-	dio48egpio->base = devm_ioport_map(dev, base[id], DIO48E_EXTENT);
-	if (!dio48egpio->base)
+	dio48egpio->reg = devm_ioport_map(dev, base[id], DIO48E_EXTENT);
+	if (!dio48egpio->reg)
 		return -ENOMEM;
 
 	dio48egpio->chip.label = name;
@@ -426,16 +489,8 @@ static int dio48e_probe(struct device *dev, unsigned int id)
 	raw_spin_lock_init(&dio48egpio->lock);
 
 	/* initialize all GPIO as output */
-	iowrite8(0x80, dio48egpio->base + 3);
-	iowrite8(0x00, dio48egpio->base);
-	iowrite8(0x00, dio48egpio->base + 1);
-	iowrite8(0x00, dio48egpio->base + 2);
-	iowrite8(0x00, dio48egpio->base + 3);
-	iowrite8(0x80, dio48egpio->base + 7);
-	iowrite8(0x00, dio48egpio->base + 4);
-	iowrite8(0x00, dio48egpio->base + 5);
-	iowrite8(0x00, dio48egpio->base + 6);
-	iowrite8(0x00, dio48egpio->base + 7);
+	dio48e_init_ppi(&dio48egpio->reg->ppi[0]);
+	dio48e_init_ppi(&dio48egpio->reg->ppi[1]);
 
 	err = devm_gpiochip_add_data(dev, &dio48egpio->chip, dio48egpio);
 	if (err) {
-- 
2.36.1