Re: [PATCH 05/10] dt-bindings: gpio: Add AXP192 GPIO bindings
From: Rob Herring
Date: Tue Jun 07 2022 - 11:17:13 EST
On Tue, Jun 07, 2022 at 11:34:19AM +0100, Aidan MacDonald wrote:
>
> Rob Herring <robh@xxxxxxxxxx> writes:
>
> > On Fri, Jun 03, 2022 at 02:57:09PM +0100, Aidan MacDonald wrote:
> >> The AXP192 PMIC is different enough from the PMICs supported by
> >> the AXP20x GPIO driver to warrant a separate driver. The AXP192
> >> driver also supports interrupts and pinconf settings.
> >>
> >> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
> >> ---
> >> .../bindings/gpio/x-powers,axp192-gpio.yaml | 59 +++++++++++++++++++
> >> 1 file changed, 59 insertions(+)
> >> create mode 100644 Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml
> >>
> >> diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml
> >> new file mode 100644
> >> index 000000000000..7a985640ade8
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml
> >> @@ -0,0 +1,59 @@
> >> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> >> +%YAML 1.2
> >> +---
> >> +$id: "http://devicetree.org/schemas/gpio/x-powers,axp192-gpio.yaml#"
> >> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> >> +
> >> +title: X-Powers AXP192 GPIO Device Tree Bindings
> >> +
> >> +maintainers:
> >> + - Chen-Yu Tsai <wens@xxxxxxxx>
> >> +
> >> +properties:
> >> + "#gpio-cells":
> >> + const: 2
> >> + description: >
> >> + The first cell is the pin number and the second is the GPIO flags.
> >> +
> >> + compatible:
> >> + oneOf:
> >> + - enum:
> >
> > No need for 'oneOf' with only 1 entry.
> >
>
> Got it.
>
> >> + - x-powers,axp192-gpio
> >> +
> >> + gpio-controller: true
> >> +
> >> +patternProperties:
> >> + "^.*-pins?$":
> >
> > You can omit '^.*'
> >
> > Why does 's' need to be optional?
> >
>
> TBH I just copied this from x-powers,axp209-gpio.yaml. A similar pattern
> is used in a few other bindings, eg. allwinner,sun4i-a10-pinctrl.yaml.
> I guess it's to allow the node names to sound more natural when there's
> only one pin.
Those cases were for compatibility with existing users. That shouldn't
be the case here.
Rob