[PATCH 2/3] drm/panel: panel-dsi-cm: Use backlight helpers

From: Stephen Kitt
Date: Tue Jun 07 2022 - 16:53:12 EST


Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.

Instead of setting the power state by manually updating fields in
struct backlight_properties, use backlight_enable() and
backlight_disable(). These also call backlight_update_status() so the
separate call is no longer needed.

Signed-off-by: Stephen Kitt <steve@xxxxxxx>
Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
Cc: David Airlie <airlied@xxxxxxxx>
Cc: Daniel Vetter <daniel@xxxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
---
drivers/gpu/drm/panel/panel-dsi-cm.c | 24 ++++--------------------
1 file changed, 4 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-dsi-cm.c b/drivers/gpu/drm/panel/panel-dsi-cm.c
index b58cb064975f..aa36dc6cedd3 100644
--- a/drivers/gpu/drm/panel/panel-dsi-cm.c
+++ b/drivers/gpu/drm/panel/panel-dsi-cm.c
@@ -86,16 +86,10 @@ static void dsicm_bl_power(struct panel_drv_data *ddata, bool enable)
return;

if (enable) {
- backlight->props.fb_blank = FB_BLANK_UNBLANK;
- backlight->props.state = ~(BL_CORE_FBBLANK | BL_CORE_SUSPENDED);
- backlight->props.power = FB_BLANK_UNBLANK;
+ backlight_enable(backlight);
} else {
- backlight->props.fb_blank = FB_BLANK_NORMAL;
- backlight->props.power = FB_BLANK_POWERDOWN;
- backlight->props.state |= BL_CORE_FBBLANK | BL_CORE_SUSPENDED;
+ backlight_disable(backlight);
}
-
- backlight_update_status(backlight);
}

static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec)
@@ -196,13 +190,7 @@ static int dsicm_bl_update_status(struct backlight_device *dev)
{
struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
int r = 0;
- int level;
-
- if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
- dev->props.power == FB_BLANK_UNBLANK)
- level = dev->props.brightness;
- else
- level = 0;
+ int level = backlight_get_brightness(dev);

dev_dbg(&ddata->dsi->dev, "update brightness to %d\n", level);

@@ -219,11 +207,7 @@ static int dsicm_bl_update_status(struct backlight_device *dev)

static int dsicm_bl_get_intensity(struct backlight_device *dev)
{
- if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
- dev->props.power == FB_BLANK_UNBLANK)
- return dev->props.brightness;
-
- return 0;
+ return backlight_get_brightness(dev);
}

static const struct backlight_ops dsicm_bl_ops = {
--
2.30.2