[PATCH 5.18 307/879] net: dsa: mt7530: 1G can also support 1000BASE-X link mode
From: Greg Kroah-Hartman
Date: Tue Jun 07 2022 - 18:32:09 EST
From: Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx>
[ Upstream commit 66f862563ed68717dfd84e808ca12705ed275ced ]
When using an external PHY connected using RGMII to mt7531 port 5, the
PHY can be used to used support 1000BASE-X connections. Moreover, if
1000BASE-T is supported, then we should allow 1000BASE-X as well, since
which are supported is a property of the PHY.
Therefore, it makes no sense to exclude this from the linkmodes when
1000BASE-T is supported.
Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Tested-by: Marek Behún <kabel@xxxxxxxxxx>
Signed-off-by: Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx>
Signed-off-by: Paolo Abeni <pabeni@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/dsa/mt7530.c | 14 ++++----------
1 file changed, 4 insertions(+), 10 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index fe3cb26f4287..831ccbecb0c2 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2540,13 +2540,7 @@ static void mt7531_sgmii_validate(struct mt7530_priv *priv, int port,
/* Port5 supports ethier RGMII or SGMII.
* Port6 supports SGMII only.
*/
- switch (port) {
- case 5:
- if (mt7531_is_rgmii_port(priv, port))
- break;
- fallthrough;
- case 6:
- phylink_set(supported, 1000baseX_Full);
+ if (port == 6) {
phylink_set(supported, 2500baseX_Full);
phylink_set(supported, 2500baseT_Full);
}
@@ -2914,8 +2908,6 @@ static void
mt7530_mac_port_validate(struct dsa_switch *ds, int port,
unsigned long *supported)
{
- if (port == 5)
- phylink_set(supported, 1000baseX_Full);
}
static void mt7531_mac_port_validate(struct dsa_switch *ds, int port,
@@ -2952,8 +2944,10 @@ mt753x_phylink_validate(struct dsa_switch *ds, int port,
}
/* This switch only supports 1G full-duplex. */
- if (state->interface != PHY_INTERFACE_MODE_MII)
+ if (state->interface != PHY_INTERFACE_MODE_MII) {
phylink_set(mask, 1000baseT_Full);
+ phylink_set(mask, 1000baseX_Full);
+ }
priv->info->mac_port_validate(ds, port, mask);
--
2.35.1