[PATCH 3/3] drm/panel: sony-acx565akm: Use backlight helpers

[Stephen Kitt]

Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.

Instead of manually checking the power state in struct
backlight_properties, use backlight_is_blank().

Signed-off-by: Stephen Kitt <steve@xxxxxxx>
Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
Cc: David Airlie <airlied@xxxxxxxx>
Cc: Daniel Vetter <daniel@xxxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
---
 drivers/gpu/drm/panel/panel-sony-acx565akm.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-sony-acx565akm.c b/drivers/gpu/drm/panel/panel-sony-acx565akm.c
index 0d7541a33f87..a6bc8c8cf6c8 100644
--- a/drivers/gpu/drm/panel/panel-sony-acx565akm.c
+++ b/drivers/gpu/drm/panel/panel-sony-acx565akm.c
@@ -298,13 +298,7 @@ static void acx565akm_set_brightness(struct acx565akm_panel *lcd, int level)
 static int acx565akm_bl_update_status_locked(struct backlight_device *dev)
 {
 	struct acx565akm_panel *lcd = dev_get_drvdata(&dev->dev);
-	int level;
-
-	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
-	    dev->props.power == FB_BLANK_UNBLANK)
-		level = dev->props.brightness;
-	else
-		level = 0;
+	int level = backlight_get_brightness(dev);
 
 	acx565akm_set_brightness(lcd, level);
 
@@ -330,8 +324,7 @@ static int acx565akm_bl_get_intensity(struct backlight_device *dev)
 
 	mutex_lock(&lcd->mutex);
 
-	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
-	    dev->props.power == FB_BLANK_UNBLANK)
+	if (!backlight_is_blank(dev))
 		intensity = acx565akm_get_actual_brightness(lcd);
 	else
 		intensity = 0;
-- 
2.30.2