Re: [PATCH 1/1] KVM: MMU: Fix VM entry failure and OOPS for shdaow page table

From: Yuan Yao
Date: Tue Jun 07 2022 - 22:04:05 EST

Next message: Andrew Morton: "Re: [linux-next:master 728/1207] fs/xfs/xfs_file.c:1266:31: sparse: sparse: incorrect type in return expression (different base types)"
Previous message: Dmitry Baryshkov: "Re: [PATCH v2 2/5] phy: qcom-qmp: Add USB3 5NM QMP UNI registers"
In reply to: Sean Christopherson: "Re: [PATCH 1/1] KVM: MMU: Fix VM entry failure and OOPS for shdaow page table"
Next in thread: Sean Christopherson: "Re: [PATCH 1/1] KVM: MMU: Fix VM entry failure and OOPS for shdaow page table"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, Jun 07, 2022 at 02:58:57PM +0000, Sean Christopherson wrote:
> "KVM: x86/mmu:" for the scope please (because I'm holding out hope that someday
> we'll have a common "KVM: MMU:" that's shared by multiple architectures.
>
> And there's a s/shdaow/shadow typo. That said, I'd prefer to use the shortlog to
> give the reader a hint as to what the underlying bug is, e.g. it's not immediately
> obvious that hitting this bug requires a platform with MKTME enabled. Maybe:
>
> KVM: x86/mmu: Set memory encryption "value", not "mask", in shadow PDPTRs

Fair enough, This includes more useful information, I will use this in V2.

>
> On Tue, Jun 07, 2022, Yuan Yao wrote:
> > commit e54f1ff244ac ("KVM: x86/mmu: Add shadow_me_value and
>
> Personal preference, I don't bother with a "commit ..." in the changelog if there's
> a Fixes: that provides the same information.
>
> > repurpose shadow_me_mask") repurposed below varables:
>
> Please wrap closer to ~75 chars.
>
> Please lead with the "what", then dive into the details, that way the reader has
> an idea of what's changing. And if there's a trace, finding the one sentence that
> describes the actual change can be surprisingly difficult. Somethine like:
>
> Assign shadow_me_value, not shadow_me_mask, to PAE root entries, a.k.a. shadow
> PDPTRs, when host memory encryption is supported. The "mask" is the set of all
> possible memory encryption bits, e.g. MKTME KeyIDs, whereas "value" holds the
> actual value that needs to be stuffed into host page tables.
>
> Using shadow_me_mask results in a failed VM-Entry due to setting reserved PA
> bits in the PDPTRs, and ultimately causes an OOPS due to physical addresses
> with non-zero MKTME bits sending to_shadow_page() into the weeds.
>

I got it, the part you wrote is much better and describes it clearly, I will
use this in v2.

> > shadow_me_value: the memory encryption bit(s) that will be
> > set to the SPTE (the original shadow_me_mask).
> > shadow_me_mask: all possible memory encryption bits (which
> > is a super set of shadow_me_value).
> >
> > So assign shadow_me_mask to pae root page is wrong, instead
> > using shadow_me_value.
> >
> > Fixes: e54f1ff244ac ("KVM: x86/mmu: Add shadow_me_value and repurpose shadow_me_mask")
>
> Convention is to put Fixes: at the end of the changelog, i.e. after the trace and
> next to the Cc list and SOB chain.

OK, got it.

>
> > ----------------------
> > KVM: entry failed, hardware error 0x80000021
>
> For this specific bug, I wouldn't bother with a dump of the failed VM-Entry,
> nothing in the dump is relevant/interesting.
>
> > If you're running a guest on an Intel machine without unrestricted mode
> > support, the failure can be most likely due to the guest entering an invalid
> > state for Intel VT. For example, the guest maybe running in big real mode
> > which is not supported on less recent Intel processors.
> >
> > EAX=00000000 EBX=00000000 ECX=00000000 EDX=000806f3
> > ESI=00000000 EDI=00000000 EBP=00000000 ESP=00000000
> > EIP=0000e05b EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
> > ES =0000 00000000 0000ffff 00009300
> > CS =f000 000f0000 0000ffff 00009b00
> > SS =0000 00000000 0000ffff 00009300
> > DS =0000 00000000 0000ffff 00009300
> > FS =0000 00000000 0000ffff 00009300
> > GS =0000 00000000 0000ffff 00009300
> > LDT=0000 00000000 0000ffff 00008200
> > TR =0000 00000000 0000ffff 00008b00
> > GDT= 00000000 0000ffff
> > IDT= 00000000 0000ffff
> > CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000
> > DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
> > DR6=00000000ffff0ff0 DR7=0000000000000400
> > EFER=0000000000000000
> > Code=8c 0a 14 28 3c 50 64 c8 66 90 66 90 66 90 66 90 66 90 66 90 <2e> 66 83 3e c8 61 00 0f 85 89 f0 31 d2 8e d2 66 bc 00 70 00 00 66 ba 63 fc 0e 00 e9 f3 ee
> >
> > ----------------------
> > [ 80.806596] set kvm_intel.dump_invalid_vmcs=1 to dump internal KVM state.
> > [ 293.504118] BUG: unable to handle page fault for address: ffd43f00063049e8
> > [ 293.515075] #PF: supervisor read access in kernel mode
> > [ 293.524031] #PF: error_code(0x0000) - not-present page
> > [ 293.532935] PGD 86dfd8067 P4D 0
> > [ 293.539626] Oops: 0000 [#1] PREEMPT SMP
> > [ 293.546958] CPU: 164 PID: 4260 Comm: qemu-system-x86 Tainted: G W 5.18.0-rc6-kvm-upstream-workaround+ #82
> > [ 293.565354] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.86B.0069.D14.2111291356 11/29/2021
>
> Thanks for the trace! But please trim the superfluous information, e.g. the
> timestamps, registers, code stream, etc... aren't necessary to understand why the
> fault occured.
>
> > [ 293.583639] RIP: 0010:mmu_free_root_page+0x3c/0x90 [kvm]
> > [ 293.592911] Code: 25 28 00 00 00 48 89 45 f0 31 c0 48 8b 06 48 83 f8 ff 74 4a 48 c1 e0 0c 48 89 f3 48 c1 e8 18 48 c1 e0 06 48 03 05 e4 08 20 c2 <48> 8b 70 28 48 85 f6 74 41 80 7e 20 00 75 17 83 6e 48 01 75 18 f6
> > [ 293.624056] RSP: 0018:ffa000000b3afb88 EFLAGS: 00010286
> > [ 293.633326] RAX: ffd43f00063049c0 RBX: ff110000777ff000 RCX: 0000000000000001
> > [ 293.644758] RDX: ffa000000b3afbc8 RSI: ff110000777ff000 RDI: ffa000000c211000
> > [ 293.656132] RBP: ffa000000b3afba0 R08: 0000000000000100 R09: ffa000000b3afbe0
> > [ 293.667480] R10: ffa000000b3afbe0 R11: 0000000000000000 R12: ffa000000c211000
> > [ 293.678771] R13: ffa000000b3afbc8 R14: ff11000112e9c290 R15: 00000000ffffffef
> > [ 293.690069] FS: 0000000000000000(0000) GS:ff1100084e300000(0000) knlGS:0000000000000000
> > [ 293.702514] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > [ 293.712338] CR2: ffd43f00063049e8 CR3: 000000000260a006 CR4: 0000000000773ee0
> > [ 293.723802] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > [ 293.735230] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
> > [ 293.746597] PKRU: 55555554
> > [ 293.752962] Call Trace:
> > [ 293.758978] <TASK>
> > [ 293.764579] kvm_mmu_free_roots+0xd1/0x200 [kvm]
> > [ 293.773060] __kvm_mmu_unload+0x29/0x70 [kvm]
> > [ 293.781177] kvm_mmu_unload+0x13/0x20 [kvm]
> > [ 293.789012] kvm_arch_destroy_vm+0x8a/0x190 [kvm]
> > [ 293.797355] kvm_put_kvm+0x197/0x2d0 [kvm]
> > [ 293.804925] kvm_vm_release+0x21/0x30 [kvm]
> > [ 293.812499] __fput+0x8e/0x260
> > [ 293.818715] ____fput+0xe/0x10
> > [ 293.824822] task_work_run+0x6f/0xb0
> > [ 293.831433] do_exit+0x327/0xa90
> > [ 293.837586] ? futex_unqueue+0x3f/0x70
>
> Lines with leading '?' should be dropped, they're "guesses" from the unwinder.
>
> > [ 293.844283] do_group_exit+0x35/0xa0
> > [ 293.850770] get_signal+0x911/0x930
> > [ 293.857137] arch_do_signal_or_restart+0x37/0x720
> > [ 293.864896] ? do_futex+0xf9/0x1a0
> > [ 293.871139] ? __x64_sys_futex+0x66/0x160
> > [ 293.878001] exit_to_user_mode_prepare+0xb2/0x140
> > [ 293.885576] syscall_exit_to_user_mode+0x16/0x30
> > [ 293.892973] do_syscall_64+0x4e/0x90
> > [ 293.899162] entry_SYSCALL_64_after_hwframe+0x44/0xae
> > [ 293.906972] RIP: 0033:0x7f6c844f752d
>
> Everything below here can be dropped as it's not relevant to the original bug.
>
> E.g. the entire trace can be trimmed to:

Ah, I thought that the original trace carries most information
which maybe useful to other people. Let me trim them as you
suggested in V2, thanks.

>
> set kvm_intel.dump_invalid_vmcs=1 to dump internal KVM state.
> BUG: unable to handle page fault for address: ffd43f00063049e8
> #PF: supervisor read access in kernel mode
> #PF: error_code(0x0000) - not-present page
> PGD 86dfd8067 P4D 0
> Oops: 0000 [#1] PREEMPT SMP
> CPU: 164 PID: 4260 Comm: qemu-system-x86 Tainted: G W 5.18.0-rc6-kvm-upstream-workaround+ #82
> Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.86B.0069.D14.2111291356 11/29/2021
> RIP: 0010:mmu_free_root_page+0x3c/0x90 [kvm]
> Call Trace:
> <TASK>
> kvm_mmu_free_roots+0xd1/0x200 [kvm]
> __kvm_mmu_unload+0x29/0x70 [kvm]
> kvm_mmu_unload+0x13/0x20 [kvm]
> kvm_arch_destroy_vm+0x8a/0x190 [kvm]
> kvm_put_kvm+0x197/0x2d0 [kvm]
> kvm_vm_release+0x21/0x30 [kvm]
> __fput+0x8e/0x260
> ____fput+0xe/0x10
> task_work_run+0x6f/0xb0
> do_exit+0x327/0xa90
> do_group_exit+0x35/0xa0
> get_signal+0x911/0x930
> arch_do_signal_or_restart+0x37/0x720
> exit_to_user_mode_prepare+0xb2/0x140
> syscall_exit_to_user_mode+0x16/0x30
> do_syscall_64+0x4e/0x90
> entry_SYSCALL_64_after_hwframe+0x44/0xae
>
> > [ 293.913050] Code: Unable to access opcode bytes at RIP 0x7f6c844f7503.
> > [ 293.922442] RSP: 002b:00007f6c7fbfe648 EFLAGS: 00000212 ORIG_RAX: 00000000000000ca
> > [ 293.933048] RAX: fffffffffffffe00 RBX: 0000000000000000 RCX: 00007f6c844f752d
> > [ 293.943161] RDX: 00000000ffffffff RSI: 0000000000000000 RDI: 0000557dd5a1ac58
> > [ 293.953281] RBP: 00007f6c7fbfe670 R08: 0000000000000000 R09: 0000000000000000
> > [ 293.963401] R10: 0000000000000000 R11: 0000000000000212 R12: 00007ffd0f3001be
> > [ 293.973542] R13: 00007ffd0f3001bf R14: 00007ffd0f300280 R15: 00007f6c7fbfe880
> > [ 293.983683] </TASK>
> > [ 293.988216] Modules linked in: kvm_intel kvm x86_pkg_temp_thermal snd_pcm input_leds snd_timer joydev led_class snd irqbypass efi_pstore soundcore mac_hid button sch_fq_codel ip_tables x_tables ixgbe mdio mdio_devres libphy igc xfrm_algo ptp pps_core efivarfs [last unloaded: kvm]
> > [ 294.022648] CR2: ffd43f00063049e8
> > [ 294.028694] ---[ end trace 0000000000000000 ]---
> > [ 294.042573] RIP: 0010:mmu_free_root_page+0x3c/0x90 [kvm]
> > [ 294.050908] Code: 25 28 00 00 00 48 89 45 f0 31 c0 48 8b 06 48 83 f8 ff 74 4a 48 c1 e0 0c 48 89 f3 48 c1 e8 18 48 c1 e0 06 48 03 05 e4 08 20 c2 <48> 8b 70 28 48 85 f6 74 41 80 7e 20 00 75 17 83 6e 48 01 75 18 f6
> > [ 294.079460] RSP: 0018:ffa000000b3afb88 EFLAGS: 00010286
> > [ 294.087908] RAX: ffd43f00063049c0 RBX: ff110000777ff000 RCX: 0000000000000001
> > [ 294.098558] RDX: ffa000000b3afbc8 RSI: ff110000777ff000 RDI: ffa000000c211000
> > [ 294.109193] RBP: ffa000000b3afba0 R08: 0000000000000100 R09: ffa000000b3afbe0
> > [ 294.119831] R10: ffa000000b3afbe0 R11: 0000000000000000 R12: ffa000000c211000
> > [ 294.130449] R13: ffa000000b3afbc8 R14: ff11000112e9c290 R15: 00000000ffffffef
> > [ 294.141090] FS: 0000000000000000(0000) GS:ff1100084e300000(0000) knlGS:0000000000000000
> > [ 294.152867] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > [ 294.162035] CR2: ffd43f00063049e8 CR3: 000000000260a006 CR4: 0000000000773ee0
> > [ 294.172825] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > [ 294.183618] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
> > [ 294.194390] PKRU: 55555554
> > [ 294.200189] note: qemu-system-x86[4260] exited with preempt_count 1
> > [ 294.210044] Fixing recursive fault but reboot is needed!
> > [ 294.218854] BUG: scheduling while atomic: qemu-system-x86/4260/0x00000000
> > [ 294.229357] Modules linked in: kvm_intel kvm x86_pkg_temp_thermal snd_pcm input_leds snd_timer joydev led_class snd irqbypass efi_pstore soundcore mac_hid button sch_fq_codel ip_tables x_tables ixgbe mdio mdio_devres libphy igc xfrm_algo ptp pps_core efivarfs [last unloaded: kvm]
> > [ 294.266273] Preemption disabled at:
> > [ 294.266273] [<ffffffff8109e404>] do_task_dead+0x24/0x50
> > [ 294.282274] CPU: 164 PID: 4260 Comm: qemu-system-x86 Tainted: G D W 5.18.0-rc6-kvm-upstream-workaround+ #82
> > [ 294.300693] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.86B.0069.D14.2111291356 11/29/2021
> > [ 294.319002] Call Trace:
> > [ 294.325007] <TASK>
> > [ 294.330587] dump_stack_lvl+0x38/0x49
> > [ 294.337889] ? do_task_dead+0x24/0x50
> > [ 294.345102] dump_stack+0x10/0x12
> > [ 294.351836] __schedule_bug.cold.156+0x7d/0x8e
> > [ 294.359770] __schedule+0x578/0x820
> > [ 294.366552] ? vprintk+0x52/0x80
> > [ 294.373025] ? _printk+0x58/0x6f
> > [ 294.379449] do_task_dead+0x44/0x50
> > [ 294.386097] make_task_dead.cold.48+0x50/0xaf
> > [ 294.393650] rewind_stack_and_make_dead+0x17/0x17
> > [ 294.401549] RIP: 0033:0x7f6c844f752d
> > [ 294.408147] Code: Unable to access opcode bytes at RIP 0x7f6c844f7503.
> > [ 294.418086] RSP: 002b:00007f6c7fbfe648 EFLAGS: 00000212 ORIG_RAX: 00000000000000ca
> > [ 294.429266] RAX: fffffffffffffe00 RBX: 0000000000000000 RCX: 00007f6c844f752d
> > [ 294.439998] RDX: 00000000ffffffff RSI: 0000000000000000 RDI: 0000557dd5a1ac58
> > [ 294.450748] RBP: 00007f6c7fbfe670 R08: 0000000000000000 R09: 0000000000000000
> > [ 294.461498] R10: 0000000000000000 R11: 0000000000000212 R12: 00007ffd0f3001be
> > [ 294.472199] R13: 00007ffd0f3001bf R14: 00007ffd0f300280 R15: 00007f6c7fbfe880
> > [ 294.482869] </TASK>
> >
> > Signed-off-by: Yuan Yao <yuan.yao@xxxxxxxxx>
> > ---
> > arch/x86/kvm/mmu/mmu.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
> > index efe5a3dca1e0..6bd144f1e60c 100644
> > --- a/arch/x86/kvm/mmu/mmu.c
> > +++ b/arch/x86/kvm/mmu/mmu.c
> > @@ -3411,7 +3411,7 @@ static int mmu_alloc_direct_roots(struct kvm_vcpu *vcpu)
> > root = mmu_alloc_root(vcpu, i << (30 - PAGE_SHIFT),
> > i << 30, PT32_ROOT_LEVEL, true);
> > mmu->pae_root[i] = root | PT_PRESENT_MASK |
> > - shadow_me_mask;
> > + shadow_me_value;
> > }
> > mmu->root.hpa = __pa(mmu->pae_root);
> > } else {
> > --
> > 2.27.0
> >

Next message: Andrew Morton: "Re: [linux-next:master 728/1207] fs/xfs/xfs_file.c:1266:31: sparse: sparse: incorrect type in return expression (different base types)"
Previous message: Dmitry Baryshkov: "Re: [PATCH v2 2/5] phy: qcom-qmp: Add USB3 5NM QMP UNI registers"
In reply to: Sean Christopherson: "Re: [PATCH 1/1] KVM: MMU: Fix VM entry failure and OOPS for shdaow page table"
Next in thread: Sean Christopherson: "Re: [PATCH 1/1] KVM: MMU: Fix VM entry failure and OOPS for shdaow page table"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]