[PATCH 5.18 755/879] PCI: qcom: Fix pipe clock imbalance

[Greg Kroah-Hartman]

From: Johan Hovold <johan+linaro@xxxxxxxxxx>

commit fdf6a2f533115ec5d4d9629178f8196331f1ac50 upstream.

Fix a clock imbalance introduced by ed8cc3b1fc84 ("PCI: qcom: Add support
for SDM845 PCIe controller"), which enables the pipe clock both in init()
and in post_init() but only disables in post_deinit().

Note that the pipe clock was also never disabled in the init() error
paths and that enabling the clock before powering up the PHY looks
questionable.

Link: https://lore.kernel.org/r/20220401133351.10113-1-johan+linaro@xxxxxxxxxx
Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller")
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx      # 5.6
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-qcom.c |    6 ------
 1 file changed, 6 deletions(-)

--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1238,12 +1238,6 @@ static int qcom_pcie_init_2_7_0(struct q
 		goto err_disable_clocks;
 	}
 
-	ret = clk_prepare_enable(res->pipe_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable pipe clock\n");
-		goto err_disable_clocks;
-	}
-
 	/* Wait for reset to complete, required on SM8450 */
 	usleep_range(1000, 1500);