Re: [PATCH v2 32/48] arm64: dts: rockchip: align gpio-key node names with dtschema

From: Maya Matuszczyk
Date: Thu Jun 09 2022 - 09:58:12 EST

czw., 9 cze 2022 o 13:56 Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> napisał(a):
>
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/rockchip/rk3308-evb.dts | 2 +-
> .../boot/dts/rockchip/rk3326-odroid-go2.dts | 32 +++++++++----------
> .../boot/dts/rockchip/rk3328-nanopi-r2s.dts | 2 +-
> arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi | 2 +-
> .../boot/dts/rockchip/rk3368-geekbox.dts | 2 +-
> .../dts/rockchip/rk3368-orion-r68-meta.dts | 2 +-
> .../boot/dts/rockchip/rk3368-px5-evb.dts | 2 +-
> arch/arm64/boot/dts/rockchip/rk3368-r88.dts | 2 +-
> .../boot/dts/rockchip/rk3399-firefly.dts | 2 +-
> .../dts/rockchip/rk3399-gru-chromebook.dtsi | 2 +-
> .../boot/dts/rockchip/rk3399-gru-kevin.dts | 2 +-
> .../boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 2 +-
> .../boot/dts/rockchip/rk3399-khadas-edge.dtsi | 2 +-
> .../boot/dts/rockchip/rk3399-nanopi-r4s.dts | 4 +--
> .../boot/dts/rockchip/rk3399-nanopi4.dtsi | 2 +-
> .../boot/dts/rockchip/rk3399-orangepi.dts | 2 +-
> .../boot/dts/rockchip/rk3399-pinebook-pro.dts | 4 +--
> .../boot/dts/rockchip/rk3399-roc-pc.dtsi | 2 +-
> .../boot/dts/rockchip/rk3399-rockpro64.dtsi | 2 +-
> .../boot/dts/rockchip/rk3399-sapphire.dtsi | 2 +-
> .../boot/dts/rockchip/rk3566-pinenote.dtsi | 2 +-
> 21 files changed, 38 insertions(+), 38 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
> index 9b4f855ea5d4..4b5413b12bfa 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
> @@ -75,7 +75,7 @@ gpio-keys {
> pinctrl-names = "default";
> pinctrl-0 = <&pwr_key>;
>
> - power {
> + power-key {
> gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_POWER>;
> label = "GPIO Key Power";
> diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
> index ea0695b51ecd..72328dd993ee 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
> @@ -71,82 +71,82 @@ gpio-keys {
> * |------------------------------------------------|
> */
>
> - sw1 {
> + switch-1 {
Wouldn't it make more sense to rename this and all other
renamed nodes in this dts into "button-dpad-up" or "button-1",
as on the physical device those are buttons and the naming
scheme of "sw" + number seems to be a carryover from
downstream sources.

> gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
> label = "DPAD-UP";
> linux,code = <BTN_DPAD_UP>;
> };
> - sw2 {
> + switch-2 {
> gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
> label = "DPAD-DOWN";
> linux,code = <BTN_DPAD_DOWN>;
> };
> - sw3 {
> + switch-3 {
> gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
> label = "DPAD-LEFT";
> linux,code = <BTN_DPAD_LEFT>;
> };
> - sw4 {
> + switch-4 {
> gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
> label = "DPAD-RIGHT";
> linux,code = <BTN_DPAD_RIGHT>;
> };
> - sw5 {
> + switch-5 {
> gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
> label = "BTN-A";
> linux,code = <BTN_EAST>;
> };
> - sw6 {
> + switch-6 {
> gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
> label = "BTN-B";
> linux,code = <BTN_SOUTH>;
> };
> - sw7 {
> + switch-7 {
> gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
> label = "BTN-Y";
> linux,code = <BTN_WEST>;
> };
> - sw8 {
> + switch-8 {
> gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
> label = "BTN-X";
> linux,code = <BTN_NORTH>;
> };
> - sw9 {
> + switch-9 {
> gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
> label = "F1";
> linux,code = <BTN_TRIGGER_HAPPY1>;
> };
> - sw10 {
> + switch-10 {
> gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
> label = "F2";
> linux,code = <BTN_TRIGGER_HAPPY2>;
> };
> - sw11 {
> + switch-11 {
> gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
> label = "F3";
> linux,code = <BTN_TRIGGER_HAPPY3>;
> };
> - sw12 {
> + switch-12 {
> gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
> label = "F4";
> linux,code = <BTN_TRIGGER_HAPPY4>;
> };
> - sw13 {
> + switch-13 {
> gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
> label = "F5";
> linux,code = <BTN_TRIGGER_HAPPY5>;
> };
> - sw14 {
> + switch-14 {
> gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
> label = "F6";
> linux,code = <BTN_TRIGGER_HAPPY6>;
> };
> - sw15 {
> + switch-15 {
> gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
> label = "TOP-LEFT";
> linux,code = <BTN_TL>;
> };
> - sw16 {
> + switch-16 {
> gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
> label = "TOP-RIGHT";
> linux,code = <BTN_TR>;
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
> index 3857d487ab84..1445b879ac7a 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
> @@ -34,7 +34,7 @@ keys {
> pinctrl-0 = <&reset_button_pin>;
> pinctrl-names = "default";
>
> - reset {
> + key-reset {
> label = "reset";
> gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_RESTART>;

[snip]