[PATCH] mtd: spi-nor: handle unsupported FSR opcodes properly

From: Oleksandr Ocheretnyi
Date: Fri Jun 10 2022 - 15:16:58 EST


Commit 094d3b9 ("mtd: spi-nor: Add USE_FSR flag for n25q* entries")
and following one 8f93826 ("mtd: spi-nor: micron-st: convert USE_FSR
to a manufacturer flag") enables SPINOR_OP_RDFSR opcode handling ability,
however some controller drivers still cannot handle it properly in
the micron_st_nor_ready() call what breaks some mtd callbacks with
next error logs:

mtdblock: erase of region [address1, size1] on "BIOS" failed
mtdblock: erase of region [address2, size2] on "BIOS" failed

Just skip subsequent processing of the SPINOR_OP_RDFSR opcode's results
because of -ENOTSUPP return value of the micron_st_nor_read_fsr()
if there is no proper handling of that opcode as it's been before
commit 094d3b9 ("mtd: spi-nor: Add USE_FSR flag for n25q* entries")

Signed-off-by: Oleksandr Ocheretnyi <oocheret@xxxxxxxxx>
---
drivers/mtd/spi-nor/micron-st.c | 6 +++++-
drivers/spi/spi-intel.c | 3 ++-
2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index a96f74e0f568..507e675d81e0 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -399,8 +399,12 @@ static int micron_st_nor_ready(struct spi_nor *nor)
return sr_ready;

ret = micron_st_nor_read_fsr(nor, nor->bouncebuf);
- if (ret)
+ if (ret < 0) {
+ /* Check if read FSR is supported. If not, skip it. */
+ if (ret == -ENOTSUPP)
+ return sr_ready;
return ret;
+ }

if (nor->bouncebuf[0] & (FSR_E_ERR | FSR_P_ERR)) {
if (nor->bouncebuf[0] & FSR_E_ERR)
diff --git a/drivers/spi/spi-intel.c b/drivers/spi/spi-intel.c
index 50f42983b950..f0313a718d1b 100644
--- a/drivers/spi/spi-intel.c
+++ b/drivers/spi/spi-intel.c
@@ -352,7 +352,8 @@ static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, size_t len)
val |= HSFSTS_CTL_FCYCLE_RDSR;
break;
default:
- return -EINVAL;
+ dev_dbg(ispi->dev, "%#x not supported\n", opcode);
+ return -ENOTSUPP;
}

if (len > INTEL_SPI_FIFO_SZ)
--
2.28.0