Re: [PATCH] dt-bindings: display: panel-simple: Add Arm virtual platforms display

[Sam Ravnborg]

Hi Rob,

On Fri, Jun 10, 2022 at 02:38:18PM -0600, Rob Herring wrote:
> 'arm,rtsm-display' is a panel for Arm, Ltd. virtual platforms (e.g. FVP).
> The binding has been in use for a long time, but was never documented.
> 
> Some users and an example have a 'panel-dpi' compatible, but that's not
> needed without a 'panel-timing' node which none of the users have since
> commit 928faf5e3e8d ("arm64: dts: fvp: Remove panel timings"). The
> example does have a 'panel-timing' node, but it should not for the
> same reasons the node was removed in the dts files. So update the
> example in arm,pl11x.yaml to match the schema.
> 
> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
> Cc: Robin Murphy <robin.murphy@xxxxxxx>
> Cc: Andre Przywara <andre.przywara@xxxxxxx>
> Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> ---
>  .../bindings/display/arm,pl11x.yaml           | 15 +-------------
>  .../bindings/display/panel/panel-simple.yaml  | 20 +++++++++++++------
>  2 files changed, 15 insertions(+), 20 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.yaml b/Documentation/devicetree/bindings/display/arm,pl11x.yaml
> index b545c6d20325..6cc9045e5c68 100644
> --- a/Documentation/devicetree/bindings/display/arm,pl11x.yaml
> +++ b/Documentation/devicetree/bindings/display/arm,pl11x.yaml
> @@ -159,25 +159,12 @@ examples:
>      };
>  
>      panel {
> -        compatible = "arm,rtsm-display", "panel-dpi";
> -        power-supply = <&vcc_supply>;
> +        compatible = "arm,rtsm-display";
>  
>          port {
>              clcd_panel: endpoint {
>                  remote-endpoint = <&clcd_pads>;
>              };
>          };
> -
> -        panel-timing {
> -            clock-frequency = <25175000>;
> -            hactive = <640>;
> -            hback-porch = <40>;
> -            hfront-porch = <24>;
> -            hsync-len = <96>;
> -            vactive = <480>;
> -            vback-porch = <32>;
> -            vfront-porch = <11>;
> -            vsync-len = <2>;
> -        };
>      };
>  ...
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> index 21ba90c9fe33..97afd276c54a 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> @@ -19,9 +19,6 @@ description: |
>  
>    If the panel is more advanced a dedicated binding file is required.
>  
> -allOf:
> -  - $ref: panel-common.yaml#
> -
>  properties:
>  
>    compatible:
> @@ -35,6 +32,8 @@ properties:
>        - ampire,am-480272h3tmqw-t01h
>          # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
>        - ampire,am800480r3tmqwa1h
> +        # Arm, Ltd. Virtual Platforms Display
> +      - arm,rtsm-display
>          # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
>        - auo,b101aw03
>          # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
> @@ -340,9 +339,18 @@ properties:
>  
>  additionalProperties: false
>  
> -required:
> -  - compatible
> -  - power-supply
> +allOf:
> +  - $ref: panel-common.yaml#
> +  - if:
> +      # Most 'simple' panels must have a single supply, but a virtual display does not
> +      not:
> +        properties:
> +          compatible:
> +            contains:
> +              const: arm,rtsm-display
> +    then:
> +      required:
> +        - power-supply

Sorry, but I do not like this change. The beauty of panel-simple is that
this is a collection of simple display with identical bindings because
the HW is more or less the same (in general - not in details like size
etc).

Any panels that requires more are pushed out to their own binding and
for arm,rtsm-display that would be better.

It is not this single exceptions that bothers me, it is the many
exceptions we will have in a few years from now.

	Sam