[PATCH 2/2] serial: 8250_pericom: Use UART_LCR_DLAB

[Ilpo Järvinen]

Use UART_LCR_DLAB instead of literal.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_pericom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_pericom.c b/drivers/tty/serial/8250/8250_pericom.c
index 95ff10f25d58..b8d5b7714a9d 100644
--- a/drivers/tty/serial/8250/8250_pericom.c
+++ b/drivers/tty/serial/8250/8250_pericom.c
@@ -73,7 +73,7 @@ static void pericom_do_set_divisor(struct uart_port *port, unsigned int baud,
 			struct uart_8250_port *up = up_to_u8250p(port);
 			int lcr = serial_port_in(port, UART_LCR);
 
-			serial_port_out(port, UART_LCR, lcr | 0x80);
+			serial_port_out(port, UART_LCR, lcr | UART_LCR_DLAB);
 			serial_dl_write(up, divisor);
 			serial_port_out(port, 2, 16 - scr);
 			serial_port_out(port, UART_LCR, lcr);
-- 
2.30.2