Re: [RFC Patch net-next v2 02/15] net: dsa: microchip: move switch chip_id detection to ksz_common

From: Vladimir Oltean
Date: Mon Jun 13 2022 - 05:18:56 EST

Next message: Raghu Ballappa Bankapur: "Re: [PATCH V0 1/1] asoc: msm: use hashtable to check kcontrol"
Previous message: Zhangfei Gao: "Re: [PATCH 1/2] uacce: supports device isolation feature"
Next in thread: Arun.Ramadoss: "Re: [RFC Patch net-next v2 02/15] net: dsa: microchip: move switch chip_id detection to ksz_common"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, May 30, 2022 at 04:12:44PM +0530, Arun Ramadoss wrote:
> KSZ87xx and KSZ88xx have chip_id representation at reg location 0. And
> KSZ9477 compatible switch and LAN937x switch have same chip_id detection
> at location 0x01 and 0x02. To have the common switch detect
> functionality for ksz switches, ksz_switch_detect function is
> introduced.
>
> Signed-off-by: Arun Ramadoss <arun.ramadoss@xxxxxxxxxxxxx>
> ---
> drivers/net/dsa/microchip/ksz8795.c | 46 ---------------
> drivers/net/dsa/microchip/ksz8795_reg.h | 13 -----
> drivers/net/dsa/microchip/ksz9477.c | 21 -------
> drivers/net/dsa/microchip/ksz9477_reg.h | 1 -
> drivers/net/dsa/microchip/ksz_common.c | 78 +++++++++++++++++++++++--
> drivers/net/dsa/microchip/ksz_common.h | 19 +++++-
> 6 files changed, 92 insertions(+), 86 deletions(-)
>
> diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
> index 12a599d5e61a..927db57d02db 100644
> --- a/drivers/net/dsa/microchip/ksz8795.c
> +++ b/drivers/net/dsa/microchip/ksz8795.c
> @@ -1424,51 +1424,6 @@ static u32 ksz8_get_port_addr(int port, int offset)
> return PORT_CTRL_ADDR(port, offset);
> }
>
> -static int ksz8_switch_detect(struct ksz_device *dev)
> -{
> - u8 id1, id2;
> - u16 id16;
> - int ret;
> -
> - /* read chip id */
> - ret = ksz_read16(dev, REG_CHIP_ID0, &id16);
> - if (ret)
> - return ret;
> -
> - id1 = id16 >> 8;
> - id2 = id16 & SW_CHIP_ID_M;
> -
> - switch (id1) {
> - case KSZ87_FAMILY_ID:
> - if ((id2 != CHIP_ID_94 && id2 != CHIP_ID_95))
> - return -ENODEV;
> -
> - if (id2 == CHIP_ID_95) {
> - u8 val;
> -
> - id2 = 0x95;
> - ksz_read8(dev, REG_PORT_STATUS_0, &val);

Could you replace all remaining occurrences of REG_PORT_STATUS_0 and
PORT_FIBER_MODE with KSZ8_PORT_STATUS_0 and KSZ8_PORT_FIBER_MODE?
It would be good to not have multiple definitions for the same thing.

> - if (val & PORT_FIBER_MODE)
> - id2 = 0x65;
> - } else if (id2 == CHIP_ID_94) {
> - id2 = 0x94;
> - }
> - break;
> - case KSZ88_FAMILY_ID:
> - if (id2 != CHIP_ID_63)
> - return -ENODEV;
> - break;
> - default:
> - dev_err(dev->dev, "invalid family id: %d\n", id1);
> - return -ENODEV;
> - }
> - id16 &= ~0xff;
> - id16 |= id2;
> - dev->chip_id = id16;
> -
> - return 0;
> -}
> -
> static int ksz8_switch_init(struct ksz_device *dev)
> {
> struct ksz8 *ksz8 = dev->priv;
> @@ -1522,7 +1477,6 @@ static const struct ksz_dev_ops ksz8_dev_ops = {
> .freeze_mib = ksz8_freeze_mib,
> .port_init_cnt = ksz8_port_init_cnt,
> .shutdown = ksz8_reset_switch,
> - .detect = ksz8_switch_detect,
> .init = ksz8_switch_init,
> .exit = ksz8_switch_exit,
> };
> diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
> index 4109433b6b6c..50cdc2a09f5a 100644
> --- a/drivers/net/dsa/microchip/ksz8795_reg.h
> +++ b/drivers/net/dsa/microchip/ksz8795_reg.h
> @@ -14,23 +14,10 @@
> #define KS_PRIO_M 0x3
> #define KS_PRIO_S 2
>
> -#define REG_CHIP_ID0 0x00
> -
> -#define KSZ87_FAMILY_ID 0x87
> -#define KSZ88_FAMILY_ID 0x88
> -
> -#define REG_CHIP_ID1 0x01
> -
> -#define SW_CHIP_ID_M 0xF0
> -#define SW_CHIP_ID_S 4
> #define SW_REVISION_M 0x0E
> #define SW_REVISION_S 1
> #define SW_START 0x01
>
> -#define CHIP_ID_94 0x60
> -#define CHIP_ID_95 0x90
> -#define CHIP_ID_63 0x30
> -
> #define KSZ8863_REG_SW_RESET 0x43
>
> #define KSZ8863_GLOBAL_SOFTWARE_RESET BIT(4)
> diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
> index 7afc06681c02..7d3c8f6908b6 100644
> --- a/drivers/net/dsa/microchip/ksz9477.c
> +++ b/drivers/net/dsa/microchip/ksz9477.c
> @@ -1360,23 +1360,6 @@ static u32 ksz9477_get_port_addr(int port, int offset)
> return PORT_CTRL_ADDR(port, offset);
> }
>
> -static int ksz9477_switch_detect(struct ksz_device *dev)
> -{
> - u32 id32;
> - int ret;
> -
> - /* read chip id */
> - ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32);
> - if (ret)
> - return ret;
> -
> - dev_dbg(dev->dev, "Switch detect: ID=%08x\n", id32);
> -
> - dev->chip_id = id32 & 0x00FFFF00;
> -
> - return 0;
> -}
> -
> static int ksz9477_switch_init(struct ksz_device *dev)
> {
> u8 data8;
> @@ -1407,8 +1390,6 @@ static int ksz9477_switch_init(struct ksz_device *dev)
> dev->features = GBIT_SUPPORT;
>
> if (dev->chip_id == KSZ9893_CHIP_ID) {
> - /* Chip is from KSZ9893 design. */
> - dev_info(dev->dev, "Found KSZ9893\n");
> dev->features |= IS_9893;
>
> /* Chip does not support gigabit. */
> @@ -1416,7 +1397,6 @@ static int ksz9477_switch_init(struct ksz_device *dev)
> dev->features &= ~GBIT_SUPPORT;
> dev->phy_port_cnt = 2;
> } else {
> - dev_info(dev->dev, "Found KSZ9477 or compatible\n");
> /* Chip uses new XMII register definitions. */
> dev->features |= NEW_XMII;
>
> @@ -1443,7 +1423,6 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
> .freeze_mib = ksz9477_freeze_mib,
> .port_init_cnt = ksz9477_port_init_cnt,
> .shutdown = ksz9477_reset_switch,
> - .detect = ksz9477_switch_detect,
> .init = ksz9477_switch_init,
> .exit = ksz9477_switch_exit,
> };
> diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h
> index 7a2c8d4767af..077e35ab11b5 100644
> --- a/drivers/net/dsa/microchip/ksz9477_reg.h
> +++ b/drivers/net/dsa/microchip/ksz9477_reg.h
> @@ -25,7 +25,6 @@
>
> #define REG_CHIP_ID2__1 0x0002
>
> -#define CHIP_ID_63 0x63
> #define CHIP_ID_66 0x66
> #define CHIP_ID_67 0x67
> #define CHIP_ID_77 0x77
> diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
> index 9ca8c8d7740f..9057cdb5971c 100644
> --- a/drivers/net/dsa/microchip/ksz_common.c
> +++ b/drivers/net/dsa/microchip/ksz_common.c
> @@ -930,6 +930,72 @@ void ksz_port_stp_state_set(struct dsa_switch *ds, int port,
> }
> EXPORT_SYMBOL_GPL(ksz_port_stp_state_set);
>
> +static int ksz_switch_detect(struct ksz_device *dev)
> +{
> + u8 id1, id2;
> + u16 id16;
> + u32 id32;
> + int ret;
> +
> + /* read chip id */
> + ret = ksz_read16(dev, REG_CHIP_ID0, &id16);
> + if (ret)
> + return ret;
> +
> + id1 = FIELD_GET(SW_FAMILY_ID_M, id16);
> + id2 = FIELD_GET(SW_CHIP_ID_M, id16);
> +
> + switch (id1) {
> + case KSZ87_FAMILY_ID:
> + if (id2 == CHIP_ID_95) {
> + u8 val;
> +
> + dev->chip_id = KSZ8795_CHIP_ID;
> +
> + ksz_read8(dev, KSZ8_PORT_STATUS_0, &val);
> + if (val & KSZ8_PORT_FIBER_MODE)
> + dev->chip_id = KSZ8765_CHIP_ID;
> + } else if (id2 == CHIP_ID_94) {
> + dev->chip_id = KSZ8794_CHIP_ID;
> + } else {
> + return -ENODEV;
> + }
> + break;
> + case KSZ88_FAMILY_ID:
> + if (id2 == CHIP_ID_63)
> + dev->chip_id = KSZ8830_CHIP_ID;
> + else
> + return -ENODEV;
> + break;
> + default:
> + ret = ksz_read32(dev, REG_CHIP_ID0, &id32);
> + if (ret)
> + return ret;
> +
> + dev->chip_rev = FIELD_GET(SW_REV_ID_M, id32);
> + id32 &= ~0xFF;
> +
> + switch (id32) {
> + case KSZ9477_CHIP_ID:
> + case KSZ9897_CHIP_ID:
> + case KSZ9893_CHIP_ID:
> + case KSZ9567_CHIP_ID:
> + case LAN9370_CHIP_ID:
> + case LAN9371_CHIP_ID:
> + case LAN9372_CHIP_ID:
> + case LAN9373_CHIP_ID:
> + case LAN9374_CHIP_ID:
> + dev->chip_id = id32;
> + break;
> + default:
> + dev_err(dev->dev,
> + "unsupported switch detected %x)\n", id32);
> + return -ENODEV;
> + }
> + }
> + return 0;
> +}
> +
> struct ksz_device *ksz_switch_alloc(struct device *base, void *priv)
> {
> struct dsa_switch *ds;
> @@ -986,10 +1052,9 @@ int ksz_switch_register(struct ksz_device *dev,
> mutex_init(&dev->alu_mutex);
> mutex_init(&dev->vlan_mutex);
>
> - dev->dev_ops = ops;
> -
> - if (dev->dev_ops->detect(dev))
> - return -EINVAL;
> + ret = ksz_switch_detect(dev);
> + if (ret)
> + return ret;
>
> info = ksz_lookup_info(dev->chip_id);
> if (!info)
> @@ -998,10 +1063,15 @@ int ksz_switch_register(struct ksz_device *dev,
> /* Update the compatible info with the probed one */
> dev->info = info;
>
> + dev_info(dev->dev, "found switch: %s, rev %i\n",
> + dev->info->dev_name, dev->chip_rev);
> +
> ret = ksz_check_device_id(dev);
> if (ret)
> return ret;
>
> + dev->dev_ops = ops;
> +
> ret = dev->dev_ops->init(dev);
> if (ret)
> return ret;
> diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
> index 8500eaedad67..d16c095cdefb 100644
> --- a/drivers/net/dsa/microchip/ksz_common.h
> +++ b/drivers/net/dsa/microchip/ksz_common.h
> @@ -90,6 +90,7 @@ struct ksz_device {
>
> /* chip specific data */
> u32 chip_id;
> + u8 chip_rev;
> int cpu_port; /* port connected to CPU */
> int phy_port_cnt;
> phy_interface_t compat_interface;
> @@ -182,7 +183,6 @@ struct ksz_dev_ops {
> void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze);
> void (*port_init_cnt)(struct ksz_device *dev, int port);
> int (*shutdown)(struct ksz_device *dev);
> - int (*detect)(struct ksz_device *dev);
> int (*init)(struct ksz_device *dev);
> void (*exit)(struct ksz_device *dev);
> };
> @@ -353,6 +353,23 @@ static inline void ksz_regmap_unlock(void *__mtx)
> #define PORT_RX_ENABLE BIT(1)
> #define PORT_LEARN_DISABLE BIT(0)
>
> +/* Switch ID Defines */
> +#define REG_CHIP_ID0 0x00
> +
> +#define SW_FAMILY_ID_M GENMASK(15, 8)
> +#define KSZ87_FAMILY_ID 0x87
> +#define KSZ88_FAMILY_ID 0x88
> +
> +#define KSZ8_PORT_STATUS_0 0x08
> +#define KSZ8_PORT_FIBER_MODE BIT(7)
> +
> +#define SW_CHIP_ID_M GENMASK(7, 4)
> +#define CHIP_ID_94 0x6
> +#define CHIP_ID_95 0x9

KSZ87_CHIP_ID_xxx maybe?

> +#define CHIP_ID_63 0x3

And KSZ88_CHIP_ID_63.

> +
> +#define SW_REV_ID_M GENMASK(7, 4)
> +
> /* Regmap tables generation */
> #define KSZ_SPI_OP_RD 3
> #define KSZ_SPI_OP_WR 2
> --
> 2.36.1
>

Next message: Raghu Ballappa Bankapur: "Re: [PATCH V0 1/1] asoc: msm: use hashtable to check kcontrol"
Previous message: Zhangfei Gao: "Re: [PATCH 1/2] uacce: supports device isolation feature"
Next in thread: Arun.Ramadoss: "Re: [RFC Patch net-next v2 02/15] net: dsa: microchip: move switch chip_id detection to ksz_common"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]