Re: [RESEND V2] mmc: mediatek: wait dma stop bit reset to 0

[Ulf Hansson]

On Thu, 9 Jun 2022 at 04:22, Mengqi Zhang <mengqi.zhang@xxxxxxxxxxxx> wrote:
>
> MediaTek IP requires that after dma stop, it need to wait this dma stop
> bit auto-reset to 0. When bus is in high loading state, it will take a
> while for the dma stop complete. If there is no waiting operation here,
> when program runs to clear fifo and reset, bus will hang.
>
> In addition, there should be no return in msdc_data_xfer_next() if
> there is data need be transferred, because no matter what error occurs
> here, it should continue to excute to the following mmc_request_done.
> Otherwise the core layer may wait complete forever.
>
> Signed-off-by: Mengqi Zhang <mengqi.zhang@xxxxxxxxxxxx>

Applied for fixes and by adding a stable tag, thanks!

Kind regards
Uffe


> ---
>  drivers/mmc/host/mtk-sd.c | 20 ++++++++++++--------
>  1 file changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 195dc897188b..9da4489dc345 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -1356,7 +1356,7 @@ static void msdc_data_xfer_next(struct msdc_host *host, struct mmc_request *mrq)
>                 msdc_request_done(host, mrq);
>  }
>
> -static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
> +static void msdc_data_xfer_done(struct msdc_host *host, u32 events,
>                                 struct mmc_request *mrq, struct mmc_data *data)
>  {
>         struct mmc_command *stop;
> @@ -1376,7 +1376,7 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
>         spin_unlock_irqrestore(&host->lock, flags);
>
>         if (done)
> -               return true;
> +               return;
>         stop = data->stop;
>
>         if (check_data || (stop && stop->error)) {
> @@ -1385,12 +1385,15 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
>                 sdr_set_field(host->base + MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP,
>                                 1);
>
> +               ret = readl_poll_timeout_atomic(host->base + MSDC_DMA_CTRL, val,
> +                                               !(val & MSDC_DMA_CTRL_STOP), 1, 20000);
> +               if (ret)
> +                       dev_dbg(host->dev, "DMA stop timed out\n");
> +
>                 ret = readl_poll_timeout_atomic(host->base + MSDC_DMA_CFG, val,
>                                                 !(val & MSDC_DMA_CFG_STS), 1, 20000);
> -               if (ret) {
> -                       dev_dbg(host->dev, "DMA stop timed out\n");
> -                       return false;
> -               }
> +               if (ret)
> +                       dev_dbg(host->dev, "DMA inactive timed out\n");
>
>                 sdr_clr_bits(host->base + MSDC_INTEN, data_ints_mask);
>                 dev_dbg(host->dev, "DMA stop\n");
> @@ -1415,9 +1418,7 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
>                 }
>
>                 msdc_data_xfer_next(host, mrq);
> -               done = true;
>         }
> -       return done;
>  }
>
>  static void msdc_set_buswidth(struct msdc_host *host, u32 width)
> @@ -2416,6 +2417,9 @@ static void msdc_cqe_disable(struct mmc_host *mmc, bool recovery)
>         if (recovery) {
>                 sdr_set_field(host->base + MSDC_DMA_CTRL,
>                               MSDC_DMA_CTRL_STOP, 1);
> +               if (WARN_ON(readl_poll_timeout(host->base + MSDC_DMA_CTRL, val,
> +                       !(val & MSDC_DMA_CTRL_STOP), 1, 3000)))
> +                       return;
>                 if (WARN_ON(readl_poll_timeout(host->base + MSDC_DMA_CFG, val,
>                         !(val & MSDC_DMA_CFG_STS), 1, 3000)))
>                         return;
> --
> 2.25.1
>