Re: [PATCH v2 1/2] dt-bindings: dma: rework qcom,adm Documentation to yaml schema

[Christian Marangi]

On Thu, Jun 16, 2022 at 08:05:01AM -0600, Rob Herring wrote:
> On Thu, 16 Jun 2022 01:54:03 +0200, Christian Marangi wrote:
> > Rework the qcom,adm Documentation to yaml schema.
> > This is not a pure conversion since originally the driver has changed
> > implementation for the #dma-cells and was wrong from the start.
> > Also the driver now handles the common DMA clients implementation with
> > the first cell that denotes the channel number and nothing else since
> > the client will have to provide the crci information via other means.
> > 
> > Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> > ---
> > v2:
> > - Change Sob to Christian Marangi
> > - Add Bjorn in the maintainers list
> > 
> >  .../devicetree/bindings/dma/qcom,adm.yaml     | 96 +++++++++++++++++++
> >  .../devicetree/bindings/dma/qcom_adm.txt      | 61 ------------
> >  2 files changed, 96 insertions(+), 61 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/dma/qcom,adm.yaml
> >  delete mode 100644 Documentation/devicetree/bindings/dma/qcom_adm.txt
> > 
> 
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
> 
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
> 
> Full log is available here: https://patchwork.ozlabs.org/patch/
> 
> 
> dma-controller@18300000: reset-names:1: 'c0' was expected
> 	arch/arm/boot/dts/qcom-ipq8064-ap148.dtb
> 	arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb
> 
> dma-controller@18300000: reset-names:2: 'c1' was expected
> 	arch/arm/boot/dts/qcom-ipq8064-ap148.dtb
> 	arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb
> 
> dma-controller@18300000: reset-names:3: 'c2' was expected
> 	arch/arm/boot/dts/qcom-ipq8064-ap148.dtb
> 	arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb
> 
> dma-controller@18300000: reset-names: ['clk', 'pbus', 'c0', 'c1', 'c2'] is too long
> 	arch/arm/boot/dts/qcom-ipq8064-ap148.dtb
> 	arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb
> 
> dma-controller@18300000: resets: [[11, 13], [11, 12], [11, 11], [11, 10], [11, 9]] is too long
> 	arch/arm/boot/dts/qcom-ipq8064-ap148.dtb
> 	arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb
>

I should have fixed this with the other patch. Should the conversion fix
this directly?

-- 
	Ansuel