Re: [PATCH v8 3/3] dt-bindings: mtd: qcom_nandc: document qcom,boot-partitions binding

[Manivannan Sadhasivam]

On Thu, Jun 16, 2022 at 02:18:35AM +0200, Christian Marangi wrote:
> Document new qcom,boot-partition binding used to apply special
> read/write layout to boot partitions.
> 
> QCOM apply a special layout where spare data is not protected
> by ECC for some special pages (used for boot partition). Add
> Documentation on how to declare these special pages.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> ---

Reviewed-by: Manivannan Sadhasivam <mani@xxxxxxxxxx>

Thanks,
Mani

>  .../devicetree/bindings/mtd/qcom,nandc.yaml   | 27 +++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> index 84ad7ff30121..482a2c068740 100644
> --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> @@ -102,6 +102,31 @@ allOf:
>              - const: rx
>              - const: cmd
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,ipq806x-nand
> +
> +    then:
> +      properties:
> +        qcom,boot-partitions:
> +          $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +          items:
> +            items:
> +              - description: offset
> +              - description: size
> +          description:
> +            Boot partition use a different layout where the 4 bytes of spare
> +            data are not protected by ECC. Use this to declare these special
> +            partitions by defining first the offset and then the size.
> +
> +            It's in the form of <offset1 size1 offset2 size2 offset3 ...>
> +            and should be declared in ascending order.
> +
> +            Refer to the ipq8064 example on how to use this special binding.
> +
>  required:
>    - compatible
>    - reg
> @@ -135,6 +160,8 @@ examples:
>          nand-ecc-strength = <4>;
>          nand-bus-width = <8>;
>  
> +        qcom,boot-partitions = <0x0 0x58a0000>;
> +
>          partitions {
>            compatible = "fixed-partitions";
>            #address-cells = <1>;
> -- 
> 2.36.1
> 

-- 
மணிவண்ணன் சதாசிவம்