Re: [PATCH v2 02/15] dt-bindings: power: supply: Add Mediatek MT6370 Charger

[Krzysztof Kozlowski]

On 13/06/2022 04:11, ChiaEn Wu wrote:
> From: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
> 
> Add Mediatek MT6370 Charger binding documentation.
> 
> Signed-off-by: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
> ---
>  .../power/supply/mediatek,mt6370-charger.yaml | 60 +++++++++++++++++++
>  1 file changed, 60 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
> 
> diff --git a/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
> new file mode 100644
> index 000000000000..b63553ebb15b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
> @@ -0,0 +1,60 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek MT6370 Battery Charger
> +
> +maintainers:
> +  - ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
> +
> +description: |
> +  This module is part of the MT6370 MFD device.
> +  Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
> +
> +properties:
> +  compatible:
> +    const: mediatek,mt6370-charger
> +
> +  interrupts:
> +    description: |
> +      Specify what irqs are needed to be handled by MT6370 Charger driver. IRQ
> +      "MT6370_IRQ_CHG_MIVR", "MT6370_IRQ_ATTACH" and "MT6370_IRQ_OVPCTRL_UVP_D"
> +      are required.
> +    items:
> +      - description: BC1.2 done irq
> +      - description: usb plug in irq
> +      - description: mivr irq
> +
> +  interrupt-names:
> +    items:
> +      - const: attach_i
> +      - const: uvp_d_evt
> +      - const: mivr
> +
> +  io-channels:
> +    description: |
> +      Use ADC channel to read vbus, ibus, ibat, etc., info. Ibus ADC channel
> +      is required.

Add io-channel-names and describe each item - what type of ADC it is
expected to be.

> +    minItems: 1
> +    maxItems: 9
> +
> +  usb-otg-vbus-regulator:
> +    type: object
> +    description: OTG boost regulator.
> +    $ref: /schemas/regulator/regulator.yaml#

unevaluatedProperties: false

> +
> +    properties:
> +      enable-gpio:

"gpios", so:
enable-gpios

> +        maxItems: 1
> +
> +required:
> +  - compatible
> +  - interrupts
> +  - interrupt-names
> +  - io-channels
> +
> +additionalProperties: false
> +
> +...


Best regards,
Krzysztof