Re: [PATCH v8 2/3] phy: qcom-snps: Add support for overriding phy tuning parameters

From: Vinod Koul
Date: Thu Jun 16 2022 - 20:29:56 EST

Next message: Vinod Koul: "Re: [v9 2/3] phy: qcom-snps: Add support for overriding phy tuning parameters"
Previous message: Lai Jiangshan: "Re: [PATCH V3 0/7] x86/entry: Convert error_entry() to C code"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 08-06-22, 23:04, Krishna Kurapati PSSNV wrote:
>
> On 6/8/2022 9:34 PM, Vinod Koul wrote:
> > On 01-06-22, 12:26, Krishna Kurapati wrote:
> > > Add support for overriding electrical signal tuning parameters for
> > > SNPS HS Phy.
> > >
> > > Signed-off-by: Krishna Kurapati<quic_kriskura@xxxxxxxxxxx>
> > > Reviewed-by: Pavankumar Kondeti<quic_pkondeti@xxxxxxxxxxx>
> > > ---
> > > drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 267 +++++++++++++++++++++++++-
> > > 1 file changed, 265 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> > > index 5d20378..14bbb06 100644
> > > --- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> > > +++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> > > @@ -52,6 +52,12 @@
> > > #define USB2_SUSPEND_N BIT(2)
> > > #define USB2_SUSPEND_N_SEL BIT(3)
> > > +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0 (0x6c)
> > > +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1 (0x70)
> > > +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2 (0x74)
> > > +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X3 (0x78)
> > > +#define PARAM_OVRD_MASK 0xFF
> > > +
> > > #define USB2_PHY_USB_PHY_CFG0 (0x94)
> > > #define UTMI_PHY_DATAPATH_CTRL_OVERRIDE_EN BIT(0)
> > > #define UTMI_PHY_CMN_CTRL_OVERRIDE_EN BIT(1)
> > > @@ -60,12 +66,76 @@
> > > #define REFCLK_SEL_MASK GENMASK(1, 0)
> > > #define REFCLK_SEL_DEFAULT (0x2 << 0)
> > > +#define HS_DISCONNECT_MASK GENMASK(2, 0)
> > > +
> > > +#define SQUELCH_DETECTOR_MASK GENMASK(7, 5)
> > > +
> > > +#define HS_AMPLITUDE_MASK GENMASK(3, 0)
> > > +
> > > +#define PREEMPHASIS_DURATION_MASK BIT(5)
> > > +
> > > +#define PREEMPHASIS_AMPLITUDE_MASK GENMASK(7, 6)
> > I guess this is a register, pls remove blank lines between them, serves
> > no purpose
> >
> > > +
> > > +#define HS_RISE_FALL_MASK GENMASK(1, 0)
> > > +
> > > +#define HS_CROSSOVER_VOLTAGE_MASK GENMASK(3, 2)
> > > +
> > > +#define HS_OUTPUT_IMPEDANCE_MASK GENMASK(5, 4)
> > > +
> > > +#define LS_FS_OUTPUT_IMPEDANCE_MASK GENMASK(3, 0)
> > here two..
> >
> > > +
> > > +
> > One line suffices here (checkpatch with --strict would have warned you)
> >
> >
> > > static const char * const qcom_snps_hsphy_vreg_names[] = {
> > > "vdda-pll", "vdda33", "vdda18",
> > > };
> > > #define SNPS_HS_NUM_VREGS ARRAY_SIZE(qcom_snps_hsphy_vreg_names)
> > > +struct override_param {
> > > + s32 value;
> > > + u8 reg;
> > > +};
> > > +
> > > +#define OVERRIDE_PARAM(bps, val)\
> > > +{ \
> > this should be in preceding line
> >
> > > + .value = bps, \
> > > + .reg = val, \
> > > +}
> > > +
> > > +struct override_param_map {
> > > + struct override_param *param_table;
> > > + u8 table_size;
> > > + u8 reg_offset;
> > > + u8 param_mask;
> > > +};
> > > +
> > > +#define OVERRIDE_PARAM_MAP(table, num_elements, offset, mask) \
> > > +{ \
> > > + .param_table = table, \
> > > + .table_size = num_elements, \
> > > + .reg_offset = offset, \
> > > + .param_mask = mask, \
> > > +}
> >
> > > +
> > > +struct phy_override_seq {
> > > + bool need_update;
> > > + u8 offset;
> > > + u8 value;
> > > + u8 mask;
> > > +};
> > > +
> > > +static const char *phy_seq_props[] = {
> > > + "qcom,hs-disconnect-bp",
> > > + "qcom,squelch-detector-bp",
> > > + "qcom,hs-amplitude-bp",
> > > + "qcom,pre-emphasis-duration-bp",
> > > + "qcom,pre-emphasis-amplitude-bp",
> > > + "qcom,hs-rise-fall-time-bp",
> > > + "qcom,hs-crossover-voltage-microvolt",
> > > + "qcom,hs-output-impedance-micro-ohms",
> > > + "qcom,ls-fs-output-impedance-bp",
> > > +};
> > > +
> > > /**
> > > * struct qcom_snps_hsphy - snps hs phy attributes
> > > *
> > > @@ -91,6 +161,7 @@ struct qcom_snps_hsphy {
> > > bool phy_initialized;
> > > enum phy_mode mode;
> > > + struct phy_override_seq update_seq_cfg[ARRAY_SIZE(phy_seq_props)];
> > > };
> > > static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset,
> > > @@ -173,10 +244,147 @@ static int qcom_snps_hsphy_set_mode(struct phy *phy, enum phy_mode mode,
> > > return 0;
> > > }
> > > +static struct override_param hs_disconnect_sc7280[] = {
> > > + OVERRIDE_PARAM(-272, 0),
> > > + OVERRIDE_PARAM(0, 1),
> > > + OVERRIDE_PARAM(317, 2),
> > > + OVERRIDE_PARAM(630, 3),
> > > + OVERRIDE_PARAM(973, 4),
> > > + OVERRIDE_PARAM(1332, 5),
> > > + OVERRIDE_PARAM(1743, 6),
> > > + OVERRIDE_PARAM(2156, 7),
> > > +};
> > use constants for registers please
> >
> > > +
> > > +static struct override_param squelch_det_threshold_sc7280[] = {
> > > + OVERRIDE_PARAM(-2090, 7),
> > > + OVERRIDE_PARAM(-1560, 6),
> > > + OVERRIDE_PARAM(-1030, 5),
> > > + OVERRIDE_PARAM(-530, 4),
> > > + OVERRIDE_PARAM(0, 3),
> > > + OVERRIDE_PARAM(530, 2),
> > > + OVERRIDE_PARAM(1060, 1),
> > > + OVERRIDE_PARAM(1590, 0),
> > > +};
> > > +
> > > +static struct override_param hs_amplitude_sc7280[] = {
> > > + OVERRIDE_PARAM(-660, 0),
> > > + OVERRIDE_PARAM(-440, 1),
> > > + OVERRIDE_PARAM(-220, 2),
> > > + OVERRIDE_PARAM(0, 3),
> > > + OVERRIDE_PARAM(230, 4),
> > > + OVERRIDE_PARAM(440, 5),
> > > + OVERRIDE_PARAM(650, 6),
> > > + OVERRIDE_PARAM(890, 7),
> > > + OVERRIDE_PARAM(1110, 8),
> > > + OVERRIDE_PARAM(1330, 9),
> > > + OVERRIDE_PARAM(1560, 10),
> > > + OVERRIDE_PARAM(1780, 11),
> > > + OVERRIDE_PARAM(2000, 12),
> > > + OVERRIDE_PARAM(2220, 13),
> > > + OVERRIDE_PARAM(2430, 14),
> > > + OVERRIDE_PARAM(2670, 15),
> > > +};
> > > +
> > > +static struct override_param preemphasis_duration_sc7280[] = {
> > > + OVERRIDE_PARAM(10000, 1),
> > > + OVERRIDE_PARAM(20000, 0),
> > > +};
> > > +
> > > +static struct override_param preemphasis_amplitude_sc7280[] = {
> > > + OVERRIDE_PARAM(10000, 1),
> > > + OVERRIDE_PARAM(20000, 2),
> > > + OVERRIDE_PARAM(30000, 3),
> > > + OVERRIDE_PARAM(40000, 0),
> > > +};
> > > +
> > > +static struct override_param hs_rise_fall_time_sc7280[] = {
> > > + OVERRIDE_PARAM(-4100, 3),
> > > + OVERRIDE_PARAM(0, 2),
> > > + OVERRIDE_PARAM(2810, 1),
> > > + OVERRIDE_PARAM(5430, 0),
> > > +};
> > > +
> > > +static struct override_param hs_crossover_voltage_sc7280[] = {
> > > + OVERRIDE_PARAM(-31000, 1),
> > > + OVERRIDE_PARAM(0, 3),
> > > + OVERRIDE_PARAM(28000, 2),
> > > +};
> > > +
> > > +static struct override_param hs_output_impedance_sc7280[] = {
> > > + OVERRIDE_PARAM(-2300000, 3),
> > > + OVERRIDE_PARAM(0, 2),
> > > + OVERRIDE_PARAM(2600000, 1),
> > > + OVERRIDE_PARAM(6100000, 0),
> > > +};
> > > +
> > > +static struct override_param ls_fs_output_impedance_sc7280[] = {
> > > + OVERRIDE_PARAM(-1053, 15),
> > > + OVERRIDE_PARAM(-557, 7),
> > > + OVERRIDE_PARAM(0, 3),
> > > + OVERRIDE_PARAM(612, 1),
> > > + OVERRIDE_PARAM(1310, 0),
> > > +};
> > > +
> > > +struct override_param_map sc7280_idp[] = {
> > > + OVERRIDE_PARAM_MAP(
> > > + hs_disconnect_sc7280,
> > > + ARRAY_SIZE(hs_disconnect_sc7280),
> > > + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0,
> > > + HS_DISCONNECT_MASK),
> > > +
> > > + OVERRIDE_PARAM_MAP(
> > > + squelch_det_threshold_sc7280,
> > > + ARRAY_SIZE(squelch_det_threshold_sc7280),
> > > + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0,
> > > + SQUELCH_DETECTOR_MASK),
> > > +
> > > + OVERRIDE_PARAM_MAP(
> > > + hs_amplitude_sc7280,
> > > + ARRAY_SIZE(hs_amplitude_sc7280),
> > > + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1,
> > > + HS_AMPLITUDE_MASK),
> > > +
> > > + OVERRIDE_PARAM_MAP(
> > > + preemphasis_duration_sc7280,
> > > + ARRAY_SIZE(preemphasis_duration_sc7280),
> > > + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1,
> > > + PREEMPHASIS_DURATION_MASK),
> > > +
> > > + OVERRIDE_PARAM_MAP(
> > > + preemphasis_amplitude_sc7280,
> > > + ARRAY_SIZE(preemphasis_amplitude_sc7280),
> > > + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1,
> > > + PREEMPHASIS_AMPLITUDE_MASK),
> > > +
> > > + OVERRIDE_PARAM_MAP(
> > > + hs_rise_fall_time_sc7280,
> > > + ARRAY_SIZE(hs_rise_fall_time_sc7280),
> > > + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2,
> > > + HS_RISE_FALL_MASK),
> > > +
> > > + OVERRIDE_PARAM_MAP(
> > > + hs_crossover_voltage_sc7280,
> > > + ARRAY_SIZE(hs_crossover_voltage_sc7280),
> > > + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2,
> > > + HS_CROSSOVER_VOLTAGE_MASK),
> > > +
> > > + OVERRIDE_PARAM_MAP(
> > > + hs_output_impedance_sc7280,
> > > + ARRAY_SIZE(hs_output_impedance_sc7280),
> > > + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2,
> > > + HS_OUTPUT_IMPEDANCE_MASK),
> > > +
> > > + OVERRIDE_PARAM_MAP(
> > > + ls_fs_output_impedance_sc7280,
> > > + ARRAY_SIZE(ls_fs_output_impedance_sc7280),
> > > + USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X3,
> > > + LS_FS_OUTPUT_IMPEDANCE_MASK),
> > > +};
> > > +
> > > static int qcom_snps_hsphy_init(struct phy *phy)
> > > {
> > > struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
> > > - int ret;
> > > + int ret, i;
> > > dev_vdbg(&phy->dev, "%s(): Initializing SNPS HS phy\n", __func__);
> > > @@ -223,6 +431,14 @@ static int qcom_snps_hsphy_init(struct phy *phy)
> > > qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1,
> > > VBUSVLDEXT0, VBUSVLDEXT0);
> > > + for (i = 0; i < ARRAY_SIZE(hsphy->update_seq_cfg); i++) {
> > > + if (hsphy->update_seq_cfg[i].need_update)
> > > + qcom_snps_hsphy_write_mask(hsphy->base,
> > > + hsphy->update_seq_cfg[i].offset,
> > > + hsphy->update_seq_cfg[i].mask,
> > > + hsphy->update_seq_cfg[i].value);
> > > + }
> > > +
> > > qcom_snps_hsphy_write_mask(hsphy->base,
> > > USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2,
> > > VREGBYPASS, VREGBYPASS);
> > > @@ -280,7 +496,10 @@ static const struct phy_ops qcom_snps_hsphy_gen_ops = {
> > > static const struct of_device_id qcom_snps_hsphy_of_match_table[] = {
> > > { .compatible = "qcom,sm8150-usb-hs-phy", },
> > > { .compatible = "qcom,usb-snps-hs-5nm-phy", },
> > > - { .compatible = "qcom,usb-snps-hs-7nm-phy", },
> > > + {
> > > + .compatible = "qcom,usb-snps-hs-7nm-phy",
> > > + .data = &sc7280_idp,
> > > + },
> > > { .compatible = "qcom,usb-snps-femto-v2-phy", },
> > > { }
> > > };
> > > @@ -291,6 +510,49 @@ static const struct dev_pm_ops qcom_snps_hsphy_pm_ops = {
> > > qcom_snps_hsphy_runtime_resume, NULL)
> > > };
> > > +static void qcom_snps_hsphy_override_param_update_val(
> > > + const struct override_param_map map,
> > > + s32 dt_val, struct phy_override_seq *seq_entry)
> > > +{
> > > + int i;
> > > +
> > > + /*
> > > + * Param table for each param is in increasing order
> > > + * of dt values. We need to iterate over the list to
> > > + * select the entry that has equal or the next highest value.
> > > + */
> > > + for (i = 0; i < map.table_size - 1; i++) {
> > > + if (map.param_table[i].value >= dt_val)
> > > + break;
> > > + }
> > > +
> > > + seq_entry->need_update = true;
> > > + seq_entry->offset = map.reg_offset;
> > > + seq_entry->mask = map.param_mask;
> > > + seq_entry->value = map.param_table[i].reg << __ffs(map.param_mask);
> > okay am nor sure I get the idea, if we have values in DT why do we need
> > these table in driver or vice-versa?
> >
> Hi Vinod,
>
> The idea is as follows. There are 4 registers (X0-X3) that control the phy
> tuning parameters mentioned in bindings and dt. The bitmasks mentioned above
> indicate the bitmask in these registers to be updated for tuning a
> particular parameter.

Okay why not define registers and the masks then and use the properties
in DT to calculate and program these registers...

>
> sc7280_idp[] -> This table contains info regarding each parameter namely
> -> which register to be modified if we need to tune that parameter
> -> What is the bitmask in the register to be modified in that particular
> register

Bit mask for registers should be defined using BIT/GENMASK macros...

--
~Vinod

Next message: Vinod Koul: "Re: [v9 2/3] phy: qcom-snps: Add support for overriding phy tuning parameters"
Previous message: Lai Jiangshan: "Re: [PATCH V3 0/7] x86/entry: Convert error_entry() to C code"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]