Re: rk3399-roc-pc does not boot

[MR]

Am 17. Juni 2022 13:47:05 MESZ schrieb Corentin Labbe <clabbe.montjoie@xxxxxxxxx>:
>Le Fri, Jun 17, 2022 at 01:43:05PM +0200, MR a écrit :
>> 
>> 
>> Am 17. Juni 2022 11:58:03 MESZ schrieb Robin Murphy <robin.murphy@xxxxxxx>:
>> >On 2022-06-17 10:06, Corentin Labbe wrote:
>> >> Hello
>> >> 
>> >> I try to add rk3399-roc-pc to kernelCI but this board fail to ends its boot with any kernel I try.
>> >> It boot normally up to starting init but it stucks shorty after.
>> >> It fail on 5.10, 5.15, 5.17, 5.18 and linux-next.
>> >> When disabling CONFIG_USB, the board boots successfully.
>> >> 
>> >> In dmesg I see OF: graph: no port node found in /i2c@ff160000/usb-typec@22
>> >> According to Documentation/devicetree/bindings/usb/fcs,fusb302.txt, the port is mandatory.
>> >> Can it be possible that the problem was that the power port being disabled ?
>> >
>> >Indeed, I believe the OF graph error is just a meaningless annoyance, but the general problem sounds like it's probably the same thing that's come up before:
>> >
>> >https://lore.kernel.org/all/0ac6bbe7-6395-526d-213c-ac58a19d8673@xxxxxxxxxxxxx/
>> >
>> >Disabling CONFIG_TYPEC_FUSB302 or blacklisting the fusb302 module should help confirm that. I have no idea if it's still an open problem, or if it's been fixed and you might just need to define the proper power role in the DT; this just triggered a memory of that older thread :)
>> >
>> >Robin.
>> 
>> Yes, the issue above is still there. I therefore use dumb 5 V, 4 A USB power supplies  that do not react on the USB-C communication.
>> 
>> Markus
>
>@Markus
>Could you try the diff I just send ?

Right on holiday, but will test it next week.
>
>Thanks
>
>_______________________________________________
>Linux-rockchip mailing list
>Linux-rockchip@xxxxxxxxxxxxxxxxxxx
>http://lists.infradead.org/mailman/listinfo/linux-rockchip
>