[PATCH] dt-bindings: display: delete ilitek,ili9341.txt

[Conor Dooley]

From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>

ilitek,ili9341.txt was replaced by ilitek,ili9341.yaml but the txt
binding was not deleted. Do so.

Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
 .../bindings/display/ilitek,ili9341.txt       | 27 -------------------
 1 file changed, 27 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9341.txt

diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
deleted file mode 100644
index 169b32e4ee4e..000000000000
--- a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Ilitek ILI9341 display panels
-
-This binding is for display panels using an Ilitek ILI9341 controller in SPI
-mode.
-
-Required properties:
-- compatible:	"adafruit,yx240qv29", "ilitek,ili9341"
-- dc-gpios:	D/C pin
-- reset-gpios:	Reset pin
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in ../spi/spi-bus.txt must be specified.
-
-Optional properties:
-- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
-- backlight:	phandle of the backlight device attached to the panel
-
-Example:
-	display@0{
-		compatible = "adafruit,yx240qv29", "ilitek,ili9341";
-		reg = <0>;
-		spi-max-frequency = <32000000>;
-		dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		rotation = <270>;
-		backlight = <&backlight>;
-	};
-- 
2.36.1