Re: [PATCH net-next 01/28] dt-bindings: phy: Add QorIQ SerDes binding

[Rob Herring]

On Fri, 17 Jun 2022 16:32:45 -0400, Sean Anderson wrote:
> This adds a binding for the SerDes module found on QorIQ processors. The
> phy reference has two cells, one for the first lane and one for the
> last. This should allow for good support of multi-lane protocols when
> (if) they are added. There is no protocol option, because the driver is
> designed to be able to completely reconfigure lanes at runtime.
> Generally, the phy consumer can select the appropriate protocol using
> set_mode. For the most part there is only one protocol controller
> (consumer) per lane/protocol combination. The exception to this is the
> B4860 processor, which has some lanes which can be connected to
> multiple MACs. For that processor, I anticipate the easiest way to
> resolve this will be to add an additional cell with a "protocol
> controller instance" property.
> 
> Each serdes has a unique set of supported protocols (and lanes). The
> support matrix is stored in the driver and is selected based on the
> compatible string. It is anticipated that a new compatible string will
> need to be added for each serdes on each SoC that drivers support is
> added for.
> 
> There are two PLLs, each of which can be used as the master clock for
> each lane. Each PLL has its own reference. For the moment they are
> required, because it simplifies the driver implementation. Absent
> reference clocks can be modeled by a fixed-clock with a rate of 0.
> 
> Signed-off-by: Sean Anderson <sean.anderson@xxxxxxxx>
> ---
> 
>  .../bindings/phy/fsl,qoriq-serdes.yaml        | 78 +++++++++++++++++++
>  1 file changed, 78 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/fsl,qoriq-serdes.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/fsl,qoriq-serdes.example.dtb: phy@1ea0000: reg: [[0, 32112640], [0, 8192]] is too long
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/fsl,qoriq-serdes.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.