Re: [PATCH v3 11/16] iio: adc: axp20x_adc: Add support for AXP192

[Andy Shevchenko]

On Sat, Jun 18, 2022 at 11:40 PM Aidan MacDonald
<aidanmacdonald.0x0@xxxxxxxxx> wrote:
>
> The AXP192 is identical to the AXP20x, except for the addition of
> two more GPIO ADC channels.

...

> +static int axp192_write_raw(struct iio_dev *indio_dev,
> +                           struct iio_chan_spec const *chan, int val, int val2,
> +                           long mask)
> +{
> +       struct axp20x_adc_iio *info = iio_priv(indio_dev);
> +       unsigned int regmask, regval;
> +
> +       /*
> +        * The AXP192 PMIC allows the user to choose between 0V and 0.7V offsets
> +        * for (independently) GPIO0-3 when in ADC mode.
> +        */
> +       if (mask != IIO_CHAN_INFO_OFFSET)
> +               return -EINVAL;
> +
> +       if (val != 0 && val != 700000)
> +               return -EINVAL;

> +       regval = val ? 1 : 0;
> +

As per comment against the previous patch use !!val directly?

> +       switch (chan->channel) {
> +       case AXP192_GPIO0_V:
> +               regmask = AXP192_GPIO30_IN_RANGE_GPIO0;
> +               regval = FIELD_PREP(AXP192_GPIO30_IN_RANGE_GPIO0, regval);
> +               break;
> +
> +       case AXP192_GPIO1_V:
> +               regmask = AXP192_GPIO30_IN_RANGE_GPIO1;
> +               regval = FIELD_PREP(AXP192_GPIO30_IN_RANGE_GPIO1, regval);
> +               break;
> +
> +       case AXP192_GPIO2_V:
> +               regmask = AXP192_GPIO30_IN_RANGE_GPIO2;
> +               regval = FIELD_PREP(AXP192_GPIO30_IN_RANGE_GPIO2, regval);
> +               break;
> +
> +       case AXP192_GPIO3_V:
> +               regmask = AXP192_GPIO30_IN_RANGE_GPIO3;
> +               regval = FIELD_PREP(AXP192_GPIO30_IN_RANGE_GPIO3, regval);
> +               break;
> +
> +       default:
> +               return -EINVAL;
> +       }
> +
> +       return regmap_update_bits(info->regmap, AXP192_GPIO30_IN_RANGE, regmask, regval);
> +}

-- 
With Best Regards,
Andy Shevchenko