Re: [PATCH v6 1/2] dt-bindings: Document ltrf216a light sensor bindings

[Jonathan Cameron]

On Wed, 15 Jun 2022 19:21:29 +0530
Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx> wrote:

> Add devicetree bindings for ltrf216a ambient light sensor.
> 
> Signed-off-by: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
> ---
> Changes in v5
>   - Remove deprecated string 'ltr' from the bindings.
> 
> Changes in v3
>   - Fix indentation in the example section
> 
> Changes in v2
>   - Take over the maintainership for the bindings
>   - Add interrupt and power supply property in DT bindings
> 
>  .../bindings/iio/light/liteon,ltrf216a.yaml   | 50 +++++++++++++++++++
>  1 file changed, 50 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
> new file mode 100644
> index 000000000000..f256ff2e744c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
> @@ -0,0 +1,50 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/light/liteon,ltrf216a.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: LTRF216A Ambient Light Sensor
> +
> +maintainers:
> +  - Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
> +
> +description:
> +  Ambient light sensing with an i2c interface.
> +
> +properties:
> +  compatible:
> +    const:
> +      - liteon,ltrf216a
I assume you figured this out from the build bot error.

	const: liteon,ltrf216a

Please make sure to do what that message from Rob's bot says and test your bindings
before sending v7.

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  vdd-supply:
> +    description: Regulator that provides power to the sensor.
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        light-sensor@53 {
> +            compatible = "liteon,ltrf216a";
> +            reg = <0x53>;
> +            vdd-supply = <&vdd_regulator>;
> +            interrupt-parent = <&gpio0>;
> +            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> +        };
> +    };