Re: Boot stall regression from "printk for 5.19" merge

[Sergey Senozhatsky]

On (22/06/19 20:49), Marek Behún wrote:
[..]
> causes a regression on arm64 (Marvell CN9130-CRB board) where the
> system boot freezes in most cases (and is unusable until restarted by
> watchdog), or, in some cases boots, but the console output gets mangled
> for a while (the serial console spits garbage characters).

Can you please try disabling console kthreads and see how the boot
process goes? Just `return 0` from printk_activate_kthreads() (I think
this should do the trick).

> The stall example:
> 
>   ...
>   [    1.108141] io scheduler mq-deadline registered
>   [    1.108143] io scheduler kyber registered
>   [    1.163484] armada-ap806-pinctrl f06f4000.system-controller:pinctrl: registered pinctrl driver
>   [
> 
> Or another:
> 
>   ...
>   [    1.108155] io scheduler mq-deadline registered
>   [    1.108156] io scheduler kyber registered
>   [    1.162991] armada-ap806-pinctrl f06f4000.system-controller:pinctrl: registered pinctrl driver
>   [    1.163361] armada-cp110-pinctrl f2440000.system-controller:pinctrl: registered pinctrl driver
>   [    1.180827] mv_xor_v2 f0400000.xor: Marvell Version 2 XOR driver
>   [  
> 
> The garbage example:
> 
>   ...
>   [    0.920951] raid6: using neon recovery algorithm
>   [    0.921228] iommu: Default domain type: Translated
>   %
> 
>           gb@k+cFL/[    4.954974] DSA: tree 0 setup
>   [    4.955286] cfg80211: Loading compiled-in X.509 certificates for regulatory database

This is pretty suspicious. I don't see how console kthreads would
corrupt the output. I suspect that something else is going on, some
memory corruption, etc.