Re: [PATCH v5 06/15] dt-bindings: mfd: amd,pensando-elbasr: Add AMD Pensando Elba System Resource chip

[Krzysztof Kozlowski]

On 13/06/2022 21:56, Brad Larson wrote:
> From: Brad Larson <blarson@xxxxxxx>
> 
> Add support for the AMD Pensando Elba SoC System Resource chip
> using the SPI interface.  The Elba SR is a Multi-function Device
> supporting device register access using CS0, smbus interface for
> FRU and board peripherals using CS1, dual Lattice I2C masters for
> transceiver management using CS2, and CS3 for flash access.
> 
> Signed-off-by: Brad Larson <blarson@xxxxxxx>
> ---
>  .../bindings/mfd/amd,pensando-elbasr.yaml     | 93 +++++++++++++++++++
>  1 file changed, 93 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml b/Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml
> new file mode 100644
> index 000000000000..13356800b1cf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/amd,pensando-elbasr.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: AMD Pensando Elba SoC Resource Controller bindings
> +
> +description: |
> +  AMD Pensando Elba SoC Resource Controller bindings attached to a SPI bus.
> +
> +maintainers:
> +  - Brad Larson <blarson@xxxxxxx>
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - amd,pensando-elbasr
> +      - const: simple-mfd
> +
> +  spi-max-frequency:
> +    description: Maximum SPI frequency of the device in Hz.
> +
> +  reg:
> +    maxItems: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - spi-max-frequency
> +
> +patternProperties:
> +  '^reset-controller@[a-f0-9]+$':
> +    $ref: ../reset/amd,pensando-elbasr-reset.yaml
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/reset/amd,pensando-elba-reset.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    spi0 {

Just "spi"

> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        num-cs = <4>;
> +
> +        spi@0 {

"spi" is for SPI controllers. Use generic name matching the device.
Usually this is "system-controller", however Rob pointed out your
inaccurate bindings and example.

> +          compatible = "amd,pensando-elbasr", "simple-mfd";
> +          reg = <0>;
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +          spi-max-frequency = <12000000>;
> +
> +          rstc: reset-controller@0 {
> +            compatible = "amd,pensando-elbasr-reset";
> +            reg = <0>;
> +            #reset-cells = <1>;
> +          };
> +        };
> +
> +        spi@1 {
> +          compatible = "amd,pensando-elbasr", "simple-mfd";
> +          reg = <1>;
> +          spi-max-frequency = <12000000>;
> +        };
> +
> +        spi@2 {
> +          compatible = "amd,pensando-elbasr", "simple-mfd";
> +          reg = <2>;
> +          spi-max-frequency = <12000000>;
> +          interrupt-parent = <&porta>;
> +          interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> +        };
> +
> +        spi@3 {
> +          compatible = "amd,pensando-elbasr", "simple-mfd";
> +          reg = <3>;
> +          spi-max-frequency = <12000000>;
> +        };
> +    };
> +
> +...


Best regards,
Krzysztof