[PATCH 5.10 40/84] i40e: Fix call trace in setup_tx_descriptors

[Greg Kroah-Hartman]

From: Aleksandr Loktionov <aleksandr.loktionov@xxxxxxxxx>

[ Upstream commit fd5855e6b1358e816710afee68a1d2bc685176ca ]

After PF reset and ethtool -t there was call trace in dmesg
sometimes leading to panic. When there was some time, around 5
seconds, between reset and test there were no errors.

Problem was that pf reset calls i40e_vsi_close in prep_for_reset
and ethtool -t calls i40e_vsi_close in diag_test. If there was not
enough time between those commands the second i40e_vsi_close starts
before previous i40e_vsi_close was done which leads to crash.

Add check to diag_test if pf is in reset and don't start offline
tests if it is true.
Add netif_info("testing failed") into unhappy path of i40e_diag_test()

Fixes: e17bc411aea8 ("i40e: Disable offline diagnostics if VFs are enabled")
Fixes: 510efb2682b3 ("i40e: Fix ethtool offline diagnostic with netqueues")
Signed-off-by: Michal Jaron <michalx.jaron@xxxxxxxxx>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@xxxxxxxxx>
Tested-by: Gurucharan <gurucharanx.g@xxxxxxxxx> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 .../net/ethernet/intel/i40e/i40e_ethtool.c    | 25 +++++++++++++------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index a2bdb2906519..63054061966e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -2582,15 +2582,16 @@ static void i40e_diag_test(struct net_device *netdev,
 
 		set_bit(__I40E_TESTING, pf->state);
 
+		if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) ||
+		    test_bit(__I40E_RESET_INTR_RECEIVED, pf->state)) {
+			dev_warn(&pf->pdev->dev,
+				 "Cannot start offline testing when PF is in reset state.\n");
+			goto skip_ol_tests;
+		}
+
 		if (i40e_active_vfs(pf) || i40e_active_vmdqs(pf)) {
 			dev_warn(&pf->pdev->dev,
 				 "Please take active VFs and Netqueues offline and restart the adapter before running NIC diagnostics\n");
-			data[I40E_ETH_TEST_REG]		= 1;
-			data[I40E_ETH_TEST_EEPROM]	= 1;
-			data[I40E_ETH_TEST_INTR]	= 1;
-			data[I40E_ETH_TEST_LINK]	= 1;
-			eth_test->flags |= ETH_TEST_FL_FAILED;
-			clear_bit(__I40E_TESTING, pf->state);
 			goto skip_ol_tests;
 		}
 
@@ -2637,9 +2638,17 @@ static void i40e_diag_test(struct net_device *netdev,
 		data[I40E_ETH_TEST_INTR] = 0;
 	}
 
-skip_ol_tests:
-
 	netif_info(pf, drv, netdev, "testing finished\n");
+	return;
+
+skip_ol_tests:
+	data[I40E_ETH_TEST_REG]		= 1;
+	data[I40E_ETH_TEST_EEPROM]	= 1;
+	data[I40E_ETH_TEST_INTR]	= 1;
+	data[I40E_ETH_TEST_LINK]	= 1;
+	eth_test->flags |= ETH_TEST_FL_FAILED;
+	clear_bit(__I40E_TESTING, pf->state);
+	netif_info(pf, drv, netdev, "testing failed\n");
 }
 
 static void i40e_get_wol(struct net_device *netdev,
-- 
2.35.1