Re: [PATCHv5 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms

[Dinh Nguyen]

On 6/17/22 07:59, Jarkko Nikula wrote:
> Hi
>
> On 6/16/22 17:12, Dinh Nguyen wrote:
> > The I2C pins on the SoCFPGA platforms do not go through a GPIO module,
> > thus cannot be recovered by the default method of by doing a GPIO access.
> > Only a reset of the I2C IP block can a recovery be successful.
> One thing what is unclear to me how does this release the I2C slave that 
> potentially keeps the SDA stuck low. Does platform specific reset 
> sequence send 9 SCL pulses, toggle HW reset of the clients or cycle 
> power of them?
>
> If recovery is only controller point of view then worth to emphasis it 
> in the commit log and perhaps add a comment too into 
> i2c_socfpga_scl_recovery(). Some might hit an issue that I2C client is 
> stuck and wonder why recovery won't work.

The recovery is only resetting the controller itself and not the client. 
I'll add a comment in v6 to highlight this.
> > The assignment of the recover_bus needs to get done before the call to
> > devm_gpiod_get_optional(), otherwise, the assignment is not taking place
> > because of an error after returning from devm_gpiod_get_optional().
> This sentence no longer true after v3?

Correct...will update.

Dinh