Re: [PATCH v2 1/1] bus: mhi: Disable IRQs instead of freeing them during power down

[Manivannan Sadhasivam]

On Tue, Jun 21, 2022 at 04:38:09PM +0800, Qiang Yu wrote:
> MHI device may go down several times while running. So we just do
> disable/enable IRQs during the mhi_{power_down/power_up} time and
> request/free them when the MHI driver gets installed and removed.
> 

This version looks better to me. I wrote a similar patch on the plane way back
to home. But atleast you can borrow the subject:

```
bus: mhi: host: Move IRQ allocation to controller registration phase
    
During runtime, the MHI endpoint may be powered up/down several times.
So instead of allocating and destroying the IRQs all the time, let's just
enable/disable IRQs during power up/down.
    
The IRQs will be allocated during mhi_register_controller() and freed
during mhi_unregister_controller(). This works well for things like PCI
hotplug also as once the PCI device gets removed, the controller will
get unregistered. And once it comes back, it will get registered back
and even if the IRQ configuration changes (MSI), that will get accounted.
```

> Signed-off-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
> ---
> v1->v2: Rewrite commit text. Remove a random change. Use
>         inline enables.
> 
>  drivers/bus/mhi/host/init.c | 14 ++++++++++++++
>  drivers/bus/mhi/host/pm.c   | 22 ++++++++++++++++------
>  2 files changed, 30 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/bus/mhi/host/init.c b/drivers/bus/mhi/host/init.c
> index cbb86b2..daf315a 100644
> --- a/drivers/bus/mhi/host/init.c
> +++ b/drivers/bus/mhi/host/init.c
> @@ -179,6 +179,11 @@ int mhi_init_irq_setup(struct mhi_controller *mhi_cntrl)
>  				   "bhi", mhi_cntrl);
>  	if (ret)
>  		return ret;
> +	/*
> +	 * IRQ marked IRQF_SHARED isn't recommended to use IRQ_NOAUTOEN,
> +	 * so disable it explicitly.

How about?

IRQs should be enabled during mhi_async_power_up(), so disable them explicitly
here. Due to the use of IRQF_SHARED flag as default while requesting IRQs, we
assume that IRQ_NOAUTOEN is not applicable.

> +	 */
> +	disable_irq(mhi_cntrl->irq[0]);
>  
>  	for (i = 0; i < mhi_cntrl->total_ev_rings; i++, mhi_event++) {
>  		if (mhi_event->offload_ev)
> @@ -200,6 +205,8 @@ int mhi_init_irq_setup(struct mhi_controller *mhi_cntrl)
>  				mhi_cntrl->irq[mhi_event->irq], i);
>  			goto error_request;
>  		}
> +
> +		disable_irq(mhi_cntrl->irq[mhi_event->irq]);
>  	}
>  
>  	return 0;
> @@ -1003,8 +1010,14 @@ int mhi_register_controller(struct mhi_controller *mhi_cntrl,
>  
>  	mhi_create_debugfs(mhi_cntrl);
>  
> +	ret = mhi_init_irq_setup(mhi_cntrl);
> +	if (ret)
> +		goto error_setup_irq;
> +
>  	return 0;
>  
> +error_setup_irq:
> +	mhi_destroy_debugfs(mhi_cntrl);
>  err_release_dev:
>  	put_device(&mhi_dev->dev);
>  err_ida_free:
> @@ -1027,6 +1040,7 @@ void mhi_unregister_controller(struct mhi_controller *mhi_cntrl)
>  	struct mhi_chan *mhi_chan = mhi_cntrl->mhi_chan;
>  	unsigned int i;
>  
> +	mhi_deinit_free_irq(mhi_cntrl);
>  	mhi_destroy_debugfs(mhi_cntrl);
>  
>  	destroy_workqueue(mhi_cntrl->hiprio_wq);
> diff --git a/drivers/bus/mhi/host/pm.c b/drivers/bus/mhi/host/pm.c
> index dc2e8ff..eec2d1d 100644
> --- a/drivers/bus/mhi/host/pm.c
> +++ b/drivers/bus/mhi/host/pm.c
> @@ -500,7 +500,7 @@ static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl)
>  	for (i = 0; i < mhi_cntrl->total_ev_rings; i++, mhi_event++) {
>  		if (mhi_event->offload_ev)
>  			continue;
> -		free_irq(mhi_cntrl->irq[mhi_event->irq], mhi_event);
> +		disable_irq(mhi_cntrl->irq[mhi_event->irq]);
>  		tasklet_kill(&mhi_event->task);
>  	}
>  
> @@ -1060,12 +1060,13 @@ static void mhi_deassert_dev_wake(struct mhi_controller *mhi_cntrl,
>  
>  int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
>  {
> +	struct mhi_event *mhi_event = mhi_cntrl->mhi_event;
>  	enum mhi_state state;
>  	enum mhi_ee_type current_ee;
>  	enum dev_st_transition next_state;
>  	struct device *dev = &mhi_cntrl->mhi_dev->dev;
>  	u32 interval_us = 25000; /* poll register field every 25 milliseconds */
> -	int ret;
> +	int ret, i;
>  
>  	dev_info(dev, "Requested to power ON\n");
>  
> @@ -1117,9 +1118,18 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
>  		mhi_write_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_INTVEC, 0);
>  	}
>  
> -	ret = mhi_init_irq_setup(mhi_cntrl);
> -	if (ret)
> -		goto error_exit;
> +	/*
> +	 * IRQs have been reuqested during probe,

requested

Also, please align the comment in the same line even if it exceeds 80 lines. The
new convention is 100 lines.

Thanks,
Mani

> +	 * so we just need to enable them.
> +	 */
> +	enable_irq(mhi_cntrl->irq[0]);
> +
> +	for (i = 0; i < mhi_cntrl->total_ev_rings; i++, mhi_event++) {
> +		if (mhi_event->offload_ev)
> +			continue;
> +
> +		enable_irq(mhi_cntrl->irq[mhi_event->irq]);
> +	}
>  
>  	/* Transition to next state */
>  	next_state = MHI_IN_PBL(current_ee) ?
> @@ -1182,7 +1192,7 @@ void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful)
>  	/* Wait for shutdown to complete */
>  	flush_work(&mhi_cntrl->st_worker);
>  
> -	free_irq(mhi_cntrl->irq[0], mhi_cntrl);
> +	disable_irq(mhi_cntrl->irq[0]);
>  }
>  EXPORT_SYMBOL_GPL(mhi_power_down);
>  
> -- 
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
> 

-- 
மணிவண்ணன் சதாசிவம்