[PATCH v3 1/3] phy: qcom-qmp-pcie: make pipe clock rate configurable

[Robert Marko]

IPQ8074 Gen3 PCIe PHY uses 250MHz as the pipe clock rate instead of 125MHz
like every other PCIe QMP PHY does, so make it configurable as part of the
qmp_phy_cfg.

Set all of the current configs to use 125MHz as currently done.

Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 28 ++++++++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index b2cd0cf965d8..4dc4d4f8547e 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -1284,6 +1284,9 @@ struct qmp_phy_cfg {
 
 	/* true, if PHY has secondary tx/rx lanes to be configured */
 	bool is_dual_lane_phy;
+
+	/* QMP PHY pipe clock interface rate */
+	unsigned long pipe_clock_rate;
 };
 
 /**
@@ -1419,6 +1422,8 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= 995,		/* us */
 	.pwrdn_delay_max	= 1005,		/* us */
+
+	.pipe_clock_rate	= 125000000,
 };
 
 static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
@@ -1447,6 +1452,8 @@ static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= 995,		/* us */
 	.pwrdn_delay_max	= 1005,		/* us */
+
+	.pipe_clock_rate	= 125000000,
 };
 
 static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
@@ -1478,6 +1485,8 @@ static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= 995,		/* us */
 	.pwrdn_delay_max	= 1005,		/* us */
+
+	.pipe_clock_rate	= 125000000,
 };
 
 static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
@@ -1507,6 +1516,8 @@ static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= 995,		/* us */
 	.pwrdn_delay_max	= 1005,		/* us */
+
+	.pipe_clock_rate	= 125000000,
 };
 
 static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
@@ -1546,6 +1557,8 @@ static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= 995,		/* us */
 	.pwrdn_delay_max	= 1005,		/* us */
+
+	.pipe_clock_rate	= 125000000,
 };
 
 static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
@@ -1586,6 +1599,8 @@ static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= 995,		/* us */
 	.pwrdn_delay_max	= 1005,		/* us */
+
+	.pipe_clock_rate	= 125000000,
 };
 
 static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
@@ -1611,6 +1626,8 @@ static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
 	.start_ctrl             = SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
 	.phy_status		= PHYSTATUS,
+
+	.pipe_clock_rate	= 125000000,
 };
 
 static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
@@ -1641,6 +1658,8 @@ static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= 995,		/* us */
 	.pwrdn_delay_max	= 1005,		/* us */
+
+	.pipe_clock_rate	= 125000000,
 };
 
 static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
@@ -1673,6 +1692,8 @@ static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= 995,		/* us */
 	.pwrdn_delay_max	= 1005,		/* us */
+
+	.pipe_clock_rate	= 125000000,
 };
 
 static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
@@ -1704,6 +1725,8 @@ static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= 995,		/* us */
 	.pwrdn_delay_max	= 1005,		/* us */
+
+	.pipe_clock_rate	= 125000000,
 };
 
 static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
@@ -1736,6 +1759,8 @@ static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= 995,		/* us */
 	.pwrdn_delay_max	= 1005,		/* us */
+
+	.pipe_clock_rate	= 125000000,
 };
 
 static void qcom_qmp_phy_pcie_configure_lane(void __iomem *base,
@@ -2121,8 +2146,7 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
 
 	init.ops = &clk_fixed_rate_ops;
 
-	/* controllers using QMP phys use 125MHz pipe clock interface */
-	fixed->fixed_rate = 125000000;
+	fixed->fixed_rate = qmp->phys[0]->cfg->pipe_clock_rate;
 	fixed->hw.init = &init;
 
 	ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
-- 
2.36.1