Re: [PATCH v2] PCI: qcom: fix IPQ8074 Gen2 support

[Dmitry Baryshkov]

On Tue, 21 Jun 2022 at 23:32, Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
>
> On Tue, Jun 21, 2022 at 01:23:30PM +0200, Robert Marko wrote:
> > IPQ8074 has one Gen2 and one Gen3 port, currently the Gen2 port will
> > cause the system to hang as its using DBI registers in the .init
> > and those are only accesible after phy_power_on().
>
> Is the fact that IPQ8074 has both a Gen2 and a Gen3 port relevant to
> this patch?  I don't see the connection.
>
> I see that qcom_pcie_host_init() does:
>
>   qcom_pcie_host_init
>     pcie->cfg->ops->init(pcie)
>     phy_power_on(pcie->phy)
>     pcie->cfg->ops->post_init(pcie)
>
> and that you're moving DBI register accesses from
> qcom_pcie_init_2_3_3() to qcom_pcie_post_init_2_3_3().
>
> But I also see DBI register accesses in other .init() functions:
>
>   qcom_pcie_init_2_1_0
>   qcom_pcie_init_1_0_0      (oddly out of order)
>   qcom_pcie_init_2_3_2
>   qcom_pcie_init_2_4_0
>
> Why do these accesses not need to be moved?  I assume it's because
> pcie->phy is an optional PHY and phy_power_on() does nothing on those
> controllers?
>
> Whatever the reason, I think the DBI accesses should be done
> consistently in .post_init().  I see that Dmitry's previous patches
> removed all those .post_init() functions, but I think the consistency
> is worth having.
>
> Perhaps we could reorder the patches so this patch comes first, moves
> the DBI accesses into .post_init(), then Dmitry's patches could be
> rebased on top to drop the clock handling?

I don't think there is a need to reorder patches. My patches do not
remove support for post_init(), they drop the callbacks code. Thus one
can reinstate necessary code back.

>
> > So solve this by splitting the DBI read/writes to .post_init.
> >
> > Fixes: a0fd361db8e5 ("PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code")
> > Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
> > ---
> > Changes in v2:
> > * Rebase onto next-20220621
> > ---
> >  drivers/pci/controller/dwc/pcie-qcom.c | 48 +++++++++++++++-----------
> >  1 file changed, 28 insertions(+), 20 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> > index 51fed83484af..da6d79d61397 100644
> > --- a/drivers/pci/controller/dwc/pcie-qcom.c
> > +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> > @@ -1061,9 +1061,7 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
> >       struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
> >       struct dw_pcie *pci = pcie->pci;
> >       struct device *dev = pci->dev;
> > -     u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> >       int i, ret;
> > -     u32 val;
> >
> >       for (i = 0; i < ARRAY_SIZE(res->rst); i++) {
> >               ret = reset_control_assert(res->rst[i]);
> > @@ -1120,6 +1118,33 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
> >               goto err_clk_aux;
> >       }
> >
> > +     return 0;
> > +
> > +err_clk_aux:
> > +     clk_disable_unprepare(res->ahb_clk);
> > +err_clk_ahb:
> > +     clk_disable_unprepare(res->axi_s_clk);
> > +err_clk_axi_s:
> > +     clk_disable_unprepare(res->axi_m_clk);
> > +err_clk_axi_m:
> > +     clk_disable_unprepare(res->iface);
> > +err_clk_iface:
> > +     /*
> > +      * Not checking for failure, will anyway return
> > +      * the original failure in 'ret'.
> > +      */
> > +     for (i = 0; i < ARRAY_SIZE(res->rst); i++)
> > +             reset_control_assert(res->rst[i]);
> > +
> > +     return ret;
> > +}
> > +
> > +static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
> > +{
> > +     struct dw_pcie *pci = pcie->pci;
> > +     u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> > +     u32 val;
> > +
> >       writel(SLV_ADDR_SPACE_SZ,
> >               pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE);
> >
> > @@ -1147,24 +1172,6 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
> >               PCI_EXP_DEVCTL2);
> >
> >       return 0;
> > -
> > -err_clk_aux:
> > -     clk_disable_unprepare(res->ahb_clk);
> > -err_clk_ahb:
> > -     clk_disable_unprepare(res->axi_s_clk);
> > -err_clk_axi_s:
> > -     clk_disable_unprepare(res->axi_m_clk);
> > -err_clk_axi_m:
> > -     clk_disable_unprepare(res->iface);
> > -err_clk_iface:
> > -     /*
> > -      * Not checking for failure, will anyway return
> > -      * the original failure in 'ret'.
> > -      */
> > -     for (i = 0; i < ARRAY_SIZE(res->rst); i++)
> > -             reset_control_assert(res->rst[i]);
> > -
> > -     return ret;
> >  }
> >
> >  static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
> > @@ -1598,6 +1605,7 @@ static const struct qcom_pcie_ops ops_2_4_0 = {
> >  static const struct qcom_pcie_ops ops_2_3_3 = {
> >       .get_resources = qcom_pcie_get_resources_2_3_3,
> >       .init = qcom_pcie_init_2_3_3,
> > +     .post_init = qcom_pcie_post_init_2_3_3,
> >       .deinit = qcom_pcie_deinit_2_3_3,
> >       .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
> >  };
> > --
> > 2.36.1
> >



--
With best wishes
Dmitry