Re: [PATCH v11 0/3] Add basic node support for MediaTek MT8186 SoC

[Matthias Brugger]

On 20/05/2022 14:22, Allen-KH Cheng wrote:
> MT8186 is a SoC based on 64bit ARMv8 architecture.
> It contains 6 CA55 and 2 CA76 cores.
> MT8186 share many HW IP with MT65xx series.
>
> This patchset was tested on MT8186 evaluation board to shell.

Applied, thanks!

> Based on next-20220519, linux-next/master
>
> changes since v9:
>   - remove some merged PATCHs from series
>   - reorder nodes in dts (cpu-map)
>   - remove okay status in auxadc
>   - remove unnecessary suffix node name for i2c
>   - add pwm node
>   - add dsi-phy node
>   - add dpi node
>
> changes since v9:
>   - add one space before equal sign of drive-strength-adv
>   - corect compatible name for big cores (ca76)
>   - use upper case of address in pinctrl
>   - add pwrap node
>   - add pwm node
>
> changes since v8:
>   - change name from pins_bus to pins-sda-scl
>   - correct email address
>   - add capacity-dmips-mhz for each CPU
>   - add ppi-partitions in gic node
>   - change name to power-domain
>   - remove status "okay" in scp node
>   - update timer and pericfg compatible in series
>
> changes since v7:
>   - add scp&auxadc node
>
> changes since v6:
>   - remove unnecessary blank line
>
> changes since v5:
>   - replace Mediatek a to MediaTek
>   - use GPL-2.0-only OR BSD-2-Clause
>
> changes since v4:
>   - correct driver clock of mt8186
>   - add power domains controller and clock controllers
>   - add pinctrl, usb host, spi and i2c nodes
>   - add node status in mt8186-evb.dts
>   - correct some dtbs_check warnings
>
> changes since v3:
>   - remove serial, mmc and phy patch from series. (already merged)
>   - remove mcusysoff node
>   - move oscillator nodes at the head of dts
>   - change name from usb-phy to t-phy
>
> changes since v2:
>   - add soc {} in mt8186.dtsi
>
> changes since v1:
>   - add dt-bindings: arm: Add compatible for MediaTek MT8186
>
> Allen-KH Cheng (3):
>    dt-bindings: arm: mediatek: Add mt8186 pericfg compatible
>    dt-bindings: arm: Add compatible for MediaTek MT8186
>    arm64: dts: Add MediaTek SoC MT8186 dts and evaluation board and
>      Makefile
>
>   .../devicetree/bindings/arm/mediatek.yaml     |    4 +
>   .../arm/mediatek/mediatek,pericfg.yaml        |    1 +
>   arch/arm64/boot/dts/mediatek/Makefile         |    1 +
>   arch/arm64/boot/dts/mediatek/mt8186-evb.dts   |  232 ++++
>   arch/arm64/boot/dts/mediatek/mt8186.dtsi      | 1016 +++++++++++++++++
>   5 files changed, 1254 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-evb.dts
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8186.dtsi