[PATCH v3 1/2] pinctrl: ingenic: Use irqd_to_hwirq()
From: Aidan MacDonald
Date: Wed Jun 22 2022 - 14:49:23 EST
Instead of accessing ->hwirq directly, use irqd_to_hwirq().
Suggested-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Acked-by: Marc Zyngier <maz@xxxxxxxxxx>
Reviewed-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
---
drivers/pinctrl/pinctrl-ingenic.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 1ca11616db74..69e0d88665d3 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -3393,7 +3393,7 @@ static void ingenic_gpio_irq_mask(struct irq_data *irqd)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
- int irq = irqd->hwirq;
+ irq_hw_number_t irq = irqd_to_hwirq(irqd);
if (is_soc_or_above(jzgc->jzpc, ID_JZ4740))
ingenic_gpio_set_bit(jzgc, GPIO_MSK, irq, true);
@@ -3405,7 +3405,7 @@ static void ingenic_gpio_irq_unmask(struct irq_data *irqd)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
- int irq = irqd->hwirq;
+ irq_hw_number_t irq = irqd_to_hwirq(irqd);
if (is_soc_or_above(jzgc->jzpc, ID_JZ4740))
ingenic_gpio_set_bit(jzgc, GPIO_MSK, irq, false);
@@ -3417,7 +3417,7 @@ static void ingenic_gpio_irq_enable(struct irq_data *irqd)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
- int irq = irqd->hwirq;
+ irq_hw_number_t irq = irqd_to_hwirq(irqd);
if (is_soc_or_above(jzgc->jzpc, ID_JZ4770))
ingenic_gpio_set_bit(jzgc, JZ4770_GPIO_INT, irq, true);
@@ -3433,7 +3433,7 @@ static void ingenic_gpio_irq_disable(struct irq_data *irqd)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
- int irq = irqd->hwirq;
+ irq_hw_number_t irq = irqd_to_hwirq(irqd);
ingenic_gpio_irq_mask(irqd);
@@ -3449,7 +3449,7 @@ static void ingenic_gpio_irq_ack(struct irq_data *irqd)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
- int irq = irqd->hwirq;
+ irq_hw_number_t irq = irqd_to_hwirq(irqd);
bool high;
if ((irqd_get_trigger_type(irqd) == IRQ_TYPE_EDGE_BOTH) &&
@@ -3477,6 +3477,7 @@ static int ingenic_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+ irq_hw_number_t irq = irqd_to_hwirq(irqd);
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
@@ -3498,12 +3499,12 @@ static int ingenic_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
* best we can do is to set up a single-edge interrupt and then
* switch to the opposing edge when ACKing the interrupt.
*/
- bool high = ingenic_gpio_get_value(jzgc, irqd->hwirq);
+ bool high = ingenic_gpio_get_value(jzgc, irq);
type = high ? IRQ_TYPE_LEVEL_LOW : IRQ_TYPE_LEVEL_HIGH;
}
- irq_set_type(jzgc, irqd->hwirq, type);
+ irq_set_type(jzgc, irq, type);
return 0;
}
@@ -3668,20 +3669,22 @@ static const struct pinctrl_ops ingenic_pctlops = {
static int ingenic_gpio_irq_request(struct irq_data *data)
{
struct gpio_chip *gpio_chip = irq_data_get_irq_chip_data(data);
+ irq_hw_number_t irq = irqd_to_hwirq(data);
int ret;
- ret = ingenic_gpio_direction_input(gpio_chip, data->hwirq);
+ ret = ingenic_gpio_direction_input(gpio_chip, irq);
if (ret)
return ret;
- return gpiochip_reqres_irq(gpio_chip, data->hwirq);
+ return gpiochip_reqres_irq(gpio_chip, irq);
}
static void ingenic_gpio_irq_release(struct irq_data *data)
{
struct gpio_chip *gpio_chip = irq_data_get_irq_chip_data(data);
+ irq_hw_number_t irq = irqd_to_hwirq(data);
- return gpiochip_relres_irq(gpio_chip, data->hwirq);
+ return gpiochip_relres_irq(gpio_chip, irq);
}
static int ingenic_pinmux_set_pin_fn(struct ingenic_pinctrl *jzpc,
--
2.35.1