Re: [PATCH] USB: serial: option: add Quectel RM500K module support

[Johan Hovold]

On Thu, Jun 23, 2022 at 11:52:14AM +0800, Macpaul Lin wrote:
> Add usb product id of the Quectel RM500K module.
> 
> RM500K provides 2 maindatory interfaces to Linux host after enumeration.

typo: mandatory

>  - /dev/ttyUSB5: this is a serial interface for control path. User needs
>    to write AT commands to this device node to query status, set APN,
>    set PIN code, and enable/disable the data connection to 5G network.
>  - ethX: this is the data path provided as a RNDIS devices. After the
>    data connection has been established, Linux host can access 5G data
>    network via this interface.
> 
> The following kernel settings is required for RM500K.
>  - CONFIG_USB_SERIAL_GENERIC
>  - CONFIG_USB_SERIAL_CONSOLE

You shouldn't need either of those.

>  - CONFIG_USB_NET_RNDIS_HOST
>  - CONFIG_USB_SERIAL_WWAN
>  - CONFIG_USB_SERIAL_OPTION

And OPTION selects WWAN so no need to mention that.

But you can probably just drop this paragraph.

> usb-devices output for 0x7001:
> T:  Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
> D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=2c7c ProdID=7001 Rev=00.01
> S:  Manufacturer=MediaTek Inc.
> S:  Product=USB DATA CARD
> S:  SerialNumber=869206050009672
> C:  #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=500mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host
> E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=125us
> I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
> E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
> E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:  If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:  If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:  If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:  If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E:  Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Can you say something about what the other interfaces are for?

> Signed-off-by: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
> Signed-off-by: Ballon Shi <ballon.shi@xxxxxxxxxxx>

The submitters SoB always goes last (to reflect how the patch was
forwarded).

If Ballon is the primary author you need to add a From line at the
beginning of mail body.

Otherwise you should add a Co-developed-by tag before the co-author's
SoB.

More details in

	Documentation/process/submitting-patches.rst

> Cc: stable@xxxxxxxxxxxxxxx
> ---
>  drivers/usb/serial/option.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index e7755d9cfc61..e2587a3c7600 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -253,6 +253,7 @@ static void option_instat_callback(struct urb *urb);
>  #define QUECTEL_PRODUCT_BG96			0x0296
>  #define QUECTEL_PRODUCT_EP06			0x0306
>  #define QUECTEL_PRODUCT_EM12			0x0512
> +#define QUECTEL_PRODUCT_RM500K			0x7001

Please keep the defines sorted by PID here.

>  #define QUECTEL_PRODUCT_RM500Q			0x0800
>  #define QUECTEL_PRODUCT_EC200S_CN		0x6002
>  #define QUECTEL_PRODUCT_EC200T			0x6026
> @@ -1135,6 +1136,7 @@ static const struct usb_device_id option_ids[] = {
>  	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0, 0) },
>  	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0700, 0xff), /* BG95 */
>  	  .driver_info = RSVD(3) | ZLP },
> +	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) },
>  	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) },
>  	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
>  	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),

Johan