[PATCH 3/3] regulator: qcom_smd: Add PM8909 RPM regulators

[Stephan Gerhold]

The set of regulators available in the PM8909 PMIC is similar to PM8916
which is already supported by the driver. s3, s4 and l16 are missing.
However, probing the SPMI hardware identification registers using the
qcom_spmi-regulator driver reveals that the regulators in PM8909 are
actually some kind of mixture between PM8916 and PM8226:

  - ult_lo_smps (= pm8916_buck_lvo_smps): s1
  - ult_ho_smps (= pm8916_buck_hvo_smps): s2
  - ult_nldo (= pm8916_nldo): l1, l2, l3, l10
  - ult_pldo (= pm8916_pldo): l4, l8, l9, l12-l15, l17, l18
  - pldo (= pm8226_pldo): l5, l6, l7, l11

Use this mapping to add the rpm_regulator_data for PM8909 by reusing
the existing regulator definitions.

Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx>
---
 drivers/regulator/qcom_smd-regulator.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 8b2d884cd693..59024c639141 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -784,6 +784,29 @@ static const struct rpm_regulator_data rpm_pm8841_regulators[] = {
 	{}
 };
 
+static const struct rpm_regulator_data rpm_pm8909_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8916_buck_lvo_smps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8916_buck_hvo_smps, "vdd_s2" },
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm8916_nldo, "vdd_l1" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm8916_nldo, "vdd_l2_l5" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm8916_nldo, "vdd_l3_l6_l10" },
+	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm8916_pldo, "vdd_l4_l7" },
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm8226_pldo, "vdd_l2_l5" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm8226_pldo, "vdd_l3_l6_l10" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm8226_pldo, "vdd_l4_l7" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm8916_pldo, "vdd_l8_l11_l15_l18" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm8916_pldo, "vdd_l9_l12_l14_l17" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm8916_nldo, "vdd_l3_l6_l10" },
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm8226_pldo, "vdd_l8_l11_l15_l18" },
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm8916_pldo, "vdd_l9_l12_l14_l17" },
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm8916_pldo, "vdd_l13" },
+	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm8916_pldo, "vdd_l9_l12_l14_l17" },
+	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm8916_pldo, "vdd_l8_l11_l15_l18" },
+	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm8916_pldo, "vdd_l9_l12_l14_l17" },
+	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm8916_pldo, "vdd_l8_l11_l15_l18" },
+	{}
+};
+
 static const struct rpm_regulator_data rpm_pm8916_regulators[] = {
 	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8916_buck_lvo_smps, "vdd_s1" },
 	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8916_buck_lvo_smps, "vdd_s2" },
@@ -1222,6 +1245,7 @@ static const struct rpm_regulator_data rpm_pm2250_regulators[] = {
 static const struct of_device_id rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-mp5496-regulators", .data = &rpm_mp5496_regulators },
 	{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
+	{ .compatible = "qcom,rpm-pm8909-regulators", .data = &rpm_pm8909_regulators },
 	{ .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
 	{ .compatible = "qcom,rpm-pm8226-regulators", .data = &rpm_pm8226_regulators },
 	{ .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
-- 
2.30.2